Hi guys,
Thanks for all your help with this but I'm still stuck.
The logon hours restrictions worked 100% after I set the timezone to GMT and set the clock to our local time here in South Africa. I then upgraded the Samba version to 3.0.11 and suddenly the logon hours restrictions went wrong again. I've tried all combinations op "time offset" in the smb.conf and tried changing the timezone back to SAST but still no luck.
I've now downgraded back to Samba-3.0.9 and set the timezone back to GMT however this time things still seem out by 2 hours e.g. 2 hours need to be added to the logon times to allow users to log in whereas before this seemed to work perfectly.
Could this really be a Slackware Linux issue ? The timezone and time settings on the workstations are 100% correct.
Any ideas are greatly appreciated. Many thanks.
Kindest regards David Wilson _______________________________ D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413 http://www.dcdata.co.za [EMAIL PROTECTED] Powered by Linux, driven by passion ! _______________________________
"Computers are not intelligent. They only think they are."
----- Original Message ----- From: "Christoph Scheeder" <[EMAIL PROTECTED]>
To: "David Wilson" <[EMAIL PROTECTED]>
Cc: <samba@lists.samba.org>
Sent: Saturday, February 05, 2005 10:51 AM
Subject: Re: [Samba] Re: Logon Hours problems (really stuck)
Hi,
yes that definitly sounds like a problem with the timezone-settings on the local
server, or a mismatch between timezones set on the server and the clients.
Doubblecheck they are consistent and in sync.
Last year i had on client pc of a customer beleave it was summertime but in fact
that ended a week before.
Result were, all files from this client stored to the samba server got
timestamps 2 hours back in time. I guess if they had defined kickofftimes this
machine would have been kicked 2 hours too early. doesn't that sound a little
familiar to you?
Fixed the clients timesetting and all was fine again.
Christoph
David Wilson schrieb:Hi Christoph,
I haven't tried what you suggested yet however there is definitely something wrong with the time on my Samba server:
In my smb.conf I have the following under my [netlogon] share which creates a log indicating user login times:
preexec = echo "%u logged into %h from %m (%I) at %T running %a." >> /tmp/samba-login.log
What is interesting is that the time indicated in my /tmp/samba-login.log is two hours behind the actual time on the server (which is synched to an international time server). This is what I get in the log:
aw088 logged into tux from lab4_6_208 (10.0.6.208) at 2005/02/04 08:39:25 running WinXP.
If I type "date" on the server this is what I get: Fri Feb 4 10:39:06 SAST 2005
As you can see, Samba believes it's two hours behind the actual (correct) time of the server.
The "time offset = 120" option in the smb.conf does not seem to make any difference.
Is this still related to the hardware clock issues etc. you've mentioned below ?
Thanks for all your help so far, greatly appreciated.
Kindest regards David Wilson _______________________________ D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413 http://www.dcdata.co.za [EMAIL PROTECTED] Powered by Linux, driven by passion ! _______________________________
"Computers are not intelligent. They only think they are."
----- Original Message ----- From: "Christoph Scheeder" <[EMAIL PROTECTED]>
To: "David Wilson" <[EMAIL PROTECTED]>
Cc: <samba@lists.samba.org>
Sent: Thursday, February 03, 2005 11:44 AM
Subject: Re: [Samba] Re: Logon Hours problems (really stuck)
Hi,
what i do is the following setup for linux-servers and time:
1.) set hardware-clock to GMT,
2.) tell the system the hardwareclock is set to GMT (how depends on distro)
3.) set local timezone to GMT+2 (again, depends on distro)
4.) check all win-Clients to have the correct timezone set
after that your system-clock should be showing the correct time in linux,
and samba should use the correct kickoff times.
as a sideefect it gives you the possibility to use ntp to sync your clock with
any timeserver out there in the internet.
Christoph
David Wilson schrieb:
Hi guys,
Unfortunately this is still happening I've tried restarting Samba. Users who should be denied access after 21:00 are being denied access at 19:00.
Our time zone in South Africa is GMT+2. Perhaps I should set the timezone on the server to UTC/GMT ?
Do you think this will help ? Should I then leave the time set to the current time in South Africa ? Or should I set the time to the time at UTC/GMT ?
There's something I must be missing here.
Kindest regards David Wilson _______________________________ D c D a t a Tel +27 33 342 7003 Fax +27 33 345 4155 Cell +27 82 4147413 http://www.dcdata.co.za [EMAIL PROTECTED] Powered by Linux, driven by passion ! _______________________________
"Computers are not intelligent. They only think they are."
-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba