To add my $0.02: Anything from Netgear or Intel will be your best choice. I have found US Robotics support to be spotty at best in nearly every linux flavor (SuSE, Mandrake, RH9/FC2) I have tried.
Plus I( have a vested interest: I was a QA Engineer on many of the Intel NICs from the mid-90s to 200, so I have a pretty good idea of how well they operate. Joe Louis van Belle wrote: > Hi, i use > 100 mbit, 3com, intel pro100 > Giga bit, intel pro1000 > because both are good supported in kernel > > Louis > > -----Original Message----- > >From: "Eric Hines"<[EMAIL PROTECTED]> > >Sent: 19-12-05 17:47:04 > >To: "samba@lists.samba.org"<samba@lists.samba.org> > >Subject: [Samba] OT: NIC > > > >Folks, > > > >I'm trying to add a network interface card to my SUSE 9.3 box, and > >I'm not having much luck with a US Robotics version. What > >manufacturer do any of you use in your machines--either 10/100MB or GigE > NIC? > > > >Thanks > > > >Eric Hines > > > >There is no nonsense so errant that it cannot be made the creed of > >the vast majority by adequate governmental action. > > --Bertrand Russell > > > >-- > >To unsubscribe from this list go to the following URL and read the > >instructions: https://lists.samba.org/mailman/listinfo/samba > > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/listinfo/samba -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba