> -----Original Message----- > From: Chris [mailto:[EMAIL PROTECTED] > Sent: 09 March 2006 15:57 > To: samba@lists.samba.org > Cc: David Smith > Subject: Re: [Samba] Samba + cups = raw postscript output > > On Thursday 09 March 2006 06:38, David Smith wrote: > > I have a printer HP LaserJet 2100 which works fine, and by looking > > at the cups log files, works as follows: > > - Client submits Postscript Lvl3 > > Just to add. I've had a 2100 since they were first introduced and it > handles PS 2 just fine. With the proper PPD the client should > send PS 2 > and the printer should receive PS 2, there should be no conversion to > PCL. At least, under ideal circumstances, there shouldn't need to be.
In addition, I have tried setting the CUPS 6 Test driver to produce Postscript Level 1, 2 and 3 and none of the render a document to the Laserjet 5si. The default PPD for the LaserJet series is the one that I used first time with the LaserJet 2100, and it worked fine, so I haven't Tried to change it. However, the Laserjet 5si is the one I'm having the most difficulty Understanding, or maybe it's a samba setting, or cups setting.... Dave -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba