Hey Jeremy, I think that just means 3 runs 1 reads, 1 writes and one 50-50. I could have sworn I sent the config file already but here it is again along with the binaries.
Thanks alot, Greg On Thu, 2006-04-06 at 18:33 -0700, Jeremy Allison wrote: > On Fri, Mar 31, 2006 at 09:49:02AM -0500, Greg Dickie wrote: > > > > Yes, it is the win32 version, but its an old one (1998), not sure how > > the config file will carry to a more recent version. > > > > > > IOmeter Access specifications: > > Transfer req. size = 64Kb & 8Kb > > Percent of Access Specification = 100% > > Type of Operation: 100% read; 100% write; 50% read > > Percent Random/Sequential Distribution: 100% sequential > > Queue Depth = 8 > > Reply Size: No Reply > > Burst Length = 25 I/Os > > Align I/Os on: 64Kb & 8Kb > > Ramp up Time = 30sec > > Run Time = 3 min > > # of clients used: 1 to 9 clients (Linear Stepping) > > Ok, I'm trying to work out how to specify this but it > doesn't make sense (this line in particular : > > Type of Operation: 100% read; 100% write; 50% read > > with the new version. Can you just attach the config > file as an attachment and I'll see if it can read it ? > > (you could just send the 1998 binary for complete reproducibility....). > > Jeremy. -- Greg Dickie just a guy Maximum Throughput
'Version 1998.10.08 'Access specifications 'Access specification name,default assignment Read 100% 64k,1 'size,% of size,% reads,% random,delay,burst,align,reply 65536,100,100,0,0,25,65536,0 'Access specification name,default assignment Write 100% 64k,1 'size,% of size,% reads,% random,delay,burst,align,reply 65536,100,0,0,0,25,65536,0 'Access specification name,default assignment Read 50% 64k,1 'size,% of size,% reads,% random,delay,burst,align,reply 65536,100,50,0,0,25,65536,0 'Access specification name,default assignment Read 100% 8k,1 'size,% of size,% reads,% random,delay,burst,align,reply 8192,100,100,0,0,25,8192,0 'Access specification name,default assignment Write 100% 8k,1 'size,% of size,% reads,% random,delay,burst,align,reply 8192,100,0,0,0,25,8192,0 'Access specification name,default assignment Read 50% 8k,1 'size,% of size,% reads,% random,delay,burst,align,reply 8192,100,50,0,0,25,8192,0 'End access specifications 'Test Setup 'Test Description 'Run Time ' hours minutes seconds 0 3 0 'Ramp Up Time (ms) 30 'Default Disk Workers to Spawn -1 'Default Network Workers to Spawn 0 'Record Results 0 'Worker Cycling ' start step step type 1 1 0 'Disk Cycling ' start step step type 1 1 0 'Queue Depth Cycling ' start end step step type 1 32 2 1 'Test Type 4 'Version 1998.10.08
-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba