Ok, well Jeremy... Apologies are in order. Turns out I screwed up. I'm sorry. I got my args mixed up and I was using -I specifying my own server hostname. So it seems I was talking to myself. DOH!! It was your request for an ethereal trace that resulted in that discovery. "Why aren't there any packets?"
The good news -- If I just use -M and the netbios name, I can get popups on my XP workstation. However, if I use -M and an IP address, I get "session request failed." Problem is, I don't have the netbios name for all the clients I'm trying to connect to. Backing up a little.... I'm trying to get an smb-wall script to work. Again. I had written one myself years ago that I'm trying to get working again, and there's also the smb-wall.pl script that ships with Samba. They both use smbstatus/smbclient and function about the same. Or rather, they break about the same. Apparently an older form of smbstatus listed both the netbios name and IP address of connected clients. Now I instead have a single column with a mix of netbios names and IP addresses. Neither my script nor apparently the Samba smb-wall.pl script have been updated to deal with this. It appears I really need the netbios name to feed to smbclient, and possibly both the netbios name and IP address for non-local clients, right? So now I'm frantically RTFMing on how I might be able to do WINS lookups, get the desired format from smbstatus, or otherwise get the netbios name, or convince smbclient it doesn't need the name. Any further pointers that might help me along would be greatly appreciated. -cw- -----Original Message----- From: Jeremy Allison [mailto:[EMAIL PROTECTED] Sent: Friday, April 14, 2006 1:13 PM To: Wilkinson Charlie E Cc: samba@lists.samba.org Subject: Re: [Samba] smbclient -M --> ERRmsgoff? On Fri, Apr 14, 2006 at 12:08:26PM -0400, Wilkinson Charlie E wrote: > Hi, > I've been a Samba user/admin for about a decade with relative success, > but now I'm stumped. I'm hoping someone might be a solution to this, or > at least a solid answer. > > If it helps, here's the response portion of the debug output: Nope, we need a full debug level 10 from smbclient and an ethereal trace would help. Jeremy. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba