2007/2/5, John Drescher <[EMAIL PROTECTED]>:
I am having problems getting Pont and Print to work with
samba-3.0.23d, cups and ldap.
I used an XP box to install the windows drivers on the samba server by
adding the drivers in the "Printers and Faxes" section (using the
server properties tab) for the samba server. This part worked fine but
when I want to associate the driver to the printer I get an access
denied in windows and in linux when I try to do the same I get this
error:
fileserver # rpcclient -U RADIMG\\root -c 'setdriver HP-2100 "HP
LaserJet 2100"' FILESERVER Password:
Connecting to host=FILESERVER
Connecting to 192.168.1.6 at port 445
Doing spnego session setup (blob length=58)
got OID=1 3 6 1 4 1 311 2 2 10
got principal=NONE
Got challenge flags:
Got NTLMSSP neg_flags=0x60890215
NTLMSSP: Set final flags:
Got NTLMSSP neg_flags=0x60080215
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x60080215
rpc_pipe_bind: Remote machine FILESERVER pipe \lsarpc fnum 0x7352 bind
request returned ok.
lsa_io_sec_qos: length c does not match size 8
rpc_pipe_bind: Remote machine FILESERVER pipe \spoolss fnum 0x7353
bind request returned ok.
SetPrinter call failed!
result was WERR_ACCESS_DENIED
...
Hi...
I had this problem too...
you need to set rights to your user.
This command set rights of print operator to user john:
net -U root -S localhost rpc rights grant john SePrintOperatorPrivilege
after, check the permissions with this:
net -U root -S localhost rpc rights list john
If you need more information take a look at:
http://samba.org/samba/docs/man/Samba-HOWTO-Collection/rights.html
bye
--
Att.
Lutieri G. B.
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
