Ok, the ML keeps eating my attachments (and signatures)... :-( You can find the Makfile here: http://samba.org/~obnox/patches/Makefile.in.3.2.0-fixed
Cheers - Michael Michael Adam wrote: > Hi, > > > > this is a bug in Makefile.in: When not building > > shared libs there are variables expanded as empty > by configure like @[EMAIL PROTECTED] When these > stand in a line of their own (like in the bin/smbd > > target just before the bin/nmbd target), this leads > > to lines consisting only of tabs + maybe spaces. > > This leads to the build errors you had. > > > > This is all fixed in the v3-2-stable tree, and the > > fix will be in 3.2.1 which is going to be released > > tomorrow. > > I attach a fixed Makefile.in if you would like to test > it immediately. You should only need to run > ./config.status and then make. > > Cheers - Michael > > Dag Ager wrote: > > Hi all, > > > > I'm trying to build Samba 3.2 on HP-UX 11.11. I already tried different > > settings > > (without ldap, active directory etc, building in a different directory) > > but without > > success. > > The Problem is independent from configure options - called within the > > source tree without any options leads exactly to the same result. > > > > Here are some informations about my setup: > > > > gcc (GCC) 4.2.3 > > HP-UX B.11.11 > > samba-3.2.0 > > PA-RISC 2.0 / 64Bit > > > > The following snippets are from my last attempt where i tried to build > > in a seperate directory. When I build directly in the source directory > > exactly the same happens. > > > > ../source/configure --prefix=/opt/samba --with-ldap=no > > > > > > warnings during configure: > > > > ...... > > checking arpa/inet.h presence... yes > > checking for arpa/inet.h... yes > > checking netinet/ip.h usability... no > > checking netinet/ip.h presence... yes > > configure: WARNING: netinet/ip.h: present but cannot be compiled > > configure: WARNING: netinet/ip.h: check for missing prerequisite > > headers? > > configure: WARNING: netinet/ip.h: see the Autoconf documentation > > configure: WARNING: netinet/ip.h: section "Present But Cannot Be > > Compiled" > > configure: WARNING: netinet/ip.h: proceeding with the preprocessor's result > > configure: WARNING: netinet/ip.h: in the future, the compiler will take > > precedence > > configure: WARNING: ## ---------------------------------------- ## > > configure: WARNING: ## Report this to [EMAIL PROTECTED] ## > > configure: WARNING: ## ---------------------------------------- ## > > > > --> strage one, perhaps the cause for the problem > > .... > > > > checking SONAMEFLAG... -Wl,+h > > checking PICFLAG... -fPIC > > checking NSSSONAMEVERSIONSUFFIX... > > checking whether building shared libraries actually works... (Bundled) > > cc: warning 422: Unknown option "b" ignored. > > /usr/ccs/bin/ld: CODE_ONE_SYM fixup to non-code subspace in file > > /usr/ccs/lib/crt0.o - shared library must be position independent. Use > > +z or +Z to recompile. > > no > > checking used PICFLAG... -fPIE > > checking for long long... yes > > checking for intptr_t... (cached) yes > > checking for LL suffix on long long integers... yes > > .... > > checking for Active Directory and krb5 support... auto > > configure: WARNING: Disabling Active Directory support (requires LDAP > > support) > > checking for nscd_flush_cache in -lnscd... no > > .... > > checking whether to use shared libraries internally... false > > configure: WARNING: --enable-shared-libs: no support for shared libraries > > checking whether to build the libtalloc shared library... no shared > > library support -- will supply static library > > ... > > > > --> no more warnings and no errors at all during configure. > > > > compiler error: > > > > ..... > > > > Compiling librpc/gen_ndr/ndr_libnet_join.c > > mkdir nsswitch/libwbclient > > Compiling nsswitch/libwbclient/wbclient.c > > Compiling nsswitch/libwbclient/wbc_util.c > > Compiling nsswitch/libwbclient/wbc_pwd.c > > Compiling nsswitch/libwbclient/wbc_idmap.c > > Compiling nsswitch/libwbclient/wbc_sid.c > > Compiling nsswitch/libwbclient/wbc_pam.c > > Compiling nsswitch/wb_common.c > > Linking non-shared library bin/libwbclient.a > > Compiling smbd/server.c > > ../source/smbd/server.c: In function 'main': > > ../source/smbd/server.c:1100: warning: passing argument 2 of > > 'set_auth_parameters' from incompatible pointer type > > Linking bin/smbd > > sh[7]: bin/nmbd:: not found. > > *** Error exit code 127 > > > > Stop. > > > > --> as a test: created directory nmbd and restarted make: > > > > .... > > > > 11:02 da:en6[86] > > make > > > > /opt/build/samba-3.2.0/build > > Using FLAGS = -O -D_SAMBA_BUILD_=3 > > -I/opt/build/samba-3.2.0/build/../source/iniparser/src -Iinclude > > -I/opt/build/samba-3.2.0/build/../source/include -I. > > -I/opt/build/samba-3.2.0/build/../source > > -I/opt/build/samba-3.2.0/build/../source/lib/replace > > -I/opt/build/samba-3.2.0/build/../source/lib/talloc > > -I/opt/build/samba-3.2.0/build/../source/lib/tdb/include > > -I/opt/build/samba-3.2.0/build/../source/libaddns > > -I/opt/build/samba-3.2.0/build/../source/librpc -DHAVE_CONFIG_H > > -Iinclude -I../source/include -I. -I../source -I../source/lib/replace > > -I../source/lib/talloc -I../source/lib/tdb/include -I../source/libaddns > > -I../source/librpc -I../source/popt -I/include > > -I/opt/build/samba-3.2.0/build/../source/lib -D_SAMBA_BUILD_=3 > > PICFLAG = -fPIE > > LIBS = -lsec -lnsl -liconv > > LDFLAGS = -pie -L./bin > > DYNEXP = -Wl,-E,+b/usr/local/lib:/usr/lib > > LDSHFLAGS = shared-libraries-disabled -L./bin > > SHLIBEXT = shared_libraries_disabled > > SONAMEFLAG = shared-libraries-disabled > > Linking non-shared library bin/libtalloc.a > > WARNING: you need to run ./config.status > > Linking non-shared library bin/libsmbclient.a > > Linking non-shared library bin/libsmbsharemodes.a > > Linking bin/smbd > > sh[7]: bin/nmbd:: not found. > > *** Error exit code 127 > > > > > > --> not really better... > > > > Anyone an Idea? Are there any known Problem with the version of gcc I use? > > > > Dag > > > > > > > > -- > > To unsubscribe from this list go to the following URL and read the > > instructions: https://lists.samba.org/mailman/listinfo/samba > > -- > Michael Adam <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> > SerNet GmbH, Bahnhofsallee 1b, 37081 Göttingen > phone: +49-551-370000-0, fax: +49-551-370000-9 > AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen > http://www.SerNet.DE, mailto: Info @ SerNet.DE > -- > To unsubscribe from this list go to the following URL and read the > instructions: https://lists.samba.org/mailman/listinfo/samba -- i.A. Michael Adam -- Michael Adam <[EMAIL PROTECTED]> SerNet GmbH, Bahnhofsallee 1b, 37081 Göttingen phone: +49-551-370000-0, fax: +49-551-370000-9 AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen http://www.SerNet.DE, mailto: Info @ SerNet.DE
pgpb0ygk1VWj3.pgp
Description: PGP signature
-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba