>Hi,
>
>Name resolution is working correctly, this is something I checked very
>early in my investigation.
>
>If I use net use with the ip address the drive is mapped straight away.
>If I use net use with the dns name I am prompted to enter my
>credentials.
>
>Regards
>
>Adam
>
>>-----Original Message-----
>>From: [EMAIL PROTECTED]
>>[mailto:[EMAIL PROTECTED] On
>>Behalf Of Peter Slickers
>>>Sent: 18 November 2008 23:34
>>To: samba list
>>Subject: [Samba] Re: Samba + Vista Issue
>>
>>Adam Stirk wrote:
>>
>> I'm experiencing a problem with samba v3.2.4 and windows vista. If I
>> access my samba share via the ip address e.g. \\192.168.0.1\share
>> <file:///\\192.168.0.1\share> windows will authenticate against the
>> samba server and bring the share up, but if I use the dns name e.g.
>> \\server.domain.local\share <file:///\\server.domain.local\share> i'm
>> faced with the logon box.
>
>I guess that name resolution is not working properly.
>
>Please open the command line interface on your Vista box and
>type the following commands:
>
> ping server.domain.local
> ping server
>
>If that is successful, try the 'net use' command:
> net use server
>Peter
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: https://lists.samba.org/mailman/listinfo/samba
Hi, we're having exactly the same problem here - only with Vista... and
solutions found? I've tryed all of the usual Vista fixes to no avail,
DNS works fine....
Thanks
Howard
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
