Further to below, here are the syslog entries for an attempt to login
from an XP/Pro workstation. While it is indicating a problem
authenticating a machine account, the machine account does exist:
Jan 3 17:50:44 whenim64 smbd[11537]: [2009/01/03 17:50:44, 0]
rpc_server/srv_netlog_nt.c:_net_auth_2(478)
Jan 3 17:50:44 whenim64 smbd[11537]: _net_auth2: creds_server_check
failed. Rejecting auth request from client SHAFEENA machine account
SHAFEENA$
Jan 3 17:50:44 whenim64 smbd[11537]: [2009/01/03 17:50:44, 0]
rpc_server/srv_netlog_nt.c:_net_auth_2(478)
Jan 3 17:50:44 whenim64 smbd[11537]: _net_auth2: creds_server_check
failed. Rejecting auth request from client SHAFEENA machine account
SHAFEENA$
Here are the syslog entries for a share connection from another machine
(hyperzip) which has not been logged out and back in since the DC switch
took place. It can still connect to shares:
Jan 3 17:59:58 whenim64 smbd[11203]: [2009/01/03 17:59:58, 0]
lib/util_sock.c:get_peer_addr(1221)
Jan 3 17:59:58 whenim64 smbd[11203]: getpeername failed. Error was
Transport endpoint is not connected
Jan 3 17:59:58 whenim64 smbd[11606]: [2009/01/03 17:59:58, 0]
lib/util_sock.c:get_peer_addr(1221)
Jan 3 17:59:58 whenim64 smbd[11606]: getpeername failed. Error was
Transport endpoint is not connected
Jan 3 17:59:58 whenim64 smbd[11606]: [2009/01/03 17:59:58, 0]
lib/util_sock.c:write_data(562)
Jan 3 17:59:58 whenim64 smbd[11606]: write_data: write failure in
writing to client 0.0.0.0. Error Connection reset by peer
Jan 3 17:59:58 whenim64 smbd[11606]: [2009/01/03 17:59:58, 0]
lib/util_sock.c:send_smb(761)
Jan 3 17:59:58 whenim64 smbd[11606]: Error writing 4 bytes to client.
-1. (Connection reset by peer)
Jan 3 17:59:58 whenim64 smbd[11607]: [2009/01/03 17:59:58, 1]
smbd/service.c:make_connection_snum(950)
Jan 3 17:59:58 whenim64 smbd[11607]: hyperzip (192.168.2.12) connect
to service archives initially as user garydale (uid=0, gid=1000) (pid
11607)
Jan 3 17:59:59 whenim64 smbd[11607]: [2009/01/03 17:59:59, 1]
smbd/service.c:make_connection_snum(950)
Jan 3 17:59:59 whenim64 smbd[11607]: hyperzip (192.168.2.12) connect
to service media$ initially as user garydale (uid=0, gid=1000) (pid 11607)
--------------------------
I'm trying to set up a new server to replace my previous domain
controller/file&print server on my home network. My old server was
running Debian/Etch on a 32bit sempron system with two HDs. The new one
is running an old 64bit single-core processor and 3 HDs configured into
multiple RAID 1 and 5 arrays (/boot as RAID 1 and /, /home, swap and a
/backup directory as RAID 5). The new server is running Debian/Etch+1/2.
Samba was installed by default since I specified the new server as a
file & print server. I rsync'ed the old /home to the new one to get the
files across. Then I used SWAT to make my old server a member server
and the new one a domain controller. Since I only had a few accounts I
set them up manually on the new machine, taking care to ensure that the
new Unix ids matched the old ones.
File sharing is working well after I remapped the drives on a running
XP/Pro workstation. However, I can't get logins to work. I've set up
machine accounts for each XP/Pro workstation and used SWAT to create the
new Samba accounts and enable them (with the same password as before)
but XP/Pro refuses to allow the logins. I also tried mapping a share on
the old server to a directory on the new and I get the same problem -
it's having problems finding a DC.
Here's my smb.conf (minus most of the shares), if that helps (ps, I will
set the log level higher as part of my debugging so don't suggest I do
that. However, any suggestions on what may be going wrong are welcome.
:) ):
# Samba config file created using SWAT
# from 192.168.2.11 (192.168.2.11)
# Date: 2009/01/03 15:47:32
[global]
workgroup = RAHIM-DALE
server string = %h server
obey pam restrictions = Yes
passdb backend = tdbsam
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
*Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
unix password sync = Yes
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
add user script = /usr/sbin/useradd -g users %u
delete user script = /usr/sbin/userdel -r %u
add group script = /usr/sbin/groupadd %g
delete group script = /usr/sbin/groupdel %g
add user to group script = /usr/sbin/usermod -G %g %u
add machine script = /usr/sbin/useradd -g machines -c Machine -d
/dev/null -s /bin/false %u\$
logon script = scripts\logon.bat
logon path = \\%L\profiles\%U
logon drive = M:
logon home = \\%L\%U
domain logons = Yes
preferred master = Yes
domain master = Yes
dns proxy = No
wins support = Yes
ldap ssl = no
panic action = /usr/share/samba/panic-action %d
idmap uid = 10000-20000
idmap gid = 10000-20000
username = root = administrator
invalid users = root
admin users = garydale, root
printer admin = garydale
printing = cups
print command =
lpq command = %p
lprm command =
include = /etc/samba/dhcp.conf
[homes]
comment = Home Directories
valid users = %S
create mask = 0700
directory mask = 0700
browseable = No
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
[profiles]
path = /home/samba/profiles
read only = No
[netlogon]
path = /home/samba/netlogon
read only = No
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
