I don't have "AUTH" set nor do I have an "unknown" box.
My server passed with no trouble at all.
http://www.attitudejim.com/relay.html
Jim
On 14/Oct/2001 08:49:21, Windjammer wrote:
> I did the test too... the last one said delivered but it actually went to my unknown
> mail box. So if someone tried to use that method I'd find it there.
>
> Danny Mallory wrote:
>
> > Yes I think this is one of the things I noticed about the router log that
> > it can
> > appear misleading. This is the same with routing rules that may delete a
> > message,
> > but yet the router.log shows that it was delivered.. I guess its all about
> > understanding
> > where and what your looking at.
> >
> > At 10/13/2001 06:46 PM, you wrote:
> > >Hello Danny and thanks for your help. I did the test that Steffen suggested,
> > >and all passed except the last attempt which said it may or may not be an
> > >open relay but not sure since it was done as an anonymous test. I did check
> > >the server.log and all seemed to be rejected!
> > >
> > >Thanks again
> > >
> > >Vince
> > >
> > >
> > >Danny Mallory <[EMAIL PROTECTED]> wrote:
> > > >should be a server.old.. just drag it into notepad.
> > > >
> > > >At 10/13/2001 05:14 PM, you wrote:
> > > >
> > > >>That is one log I didn't check. I just checked the server.log, and it only
> > > >>had entries from the time I did a restart of the server which was about
> > >30
> > > >>minutes ago. Are the server.log archived in same manner as the other
> > > files?
> > > >> But since you did the test, I can assume for now that my system at this
> > > >>point is not allowing relays to occur?
> > > >>
> > > >>I really appreciate all the help
> > > >>
> > > >>Vince!
> > > >>
> > > >>Danny Mallory <[EMAIL PROTECTED]> wrote:
> > > >> >Does your server.log show any relay attempt denys?
> > > >> >
> > > >> >At 10/13/2001 03:53 PM, you wrote:
> > > >> >
> > > >> >>Hello Danny,
> > > >> >>
> > > >> >>Yes sir that is my mail server. Thank you very much for doing the test.
> > > >> >>I am not sure how the relaying was being done? I guess everything is
> > >ok
> > > >> >>now? Here is a sample of the smtp file I was looking at I am not
> > > including
> > > >> >>the actual ip address But as far as I can tell looks like this person
> > > >>was
> > > >> >>trying to relay through me? I have about 50 of these with the same ip
> > >
> > > >> address
> > > >> >>doing the relaying. I did a ip block here so I know who knowns the ip.
> > > >>Wonder
> > > >> >>if I should send the smtp log to the ip owner or just drop
> > > >> >>it? [13/Oct/2001:00:05:02
> > > >> >>-0400] OK [000.00.000.00] [HELO] [0 bytes]
> > > >> xxx.xxx.xx.com[13/Oct/2001:00:05:02
> > > >> >>-0400] OK [] [MAIL] [0 bytes] From: <[EMAIL PROTECTED]>
> > > >> >>[13/Oct/2001:00:05:03 -0400] OK [xxx.xx.xxx.xx] [RCPT] [0 bytes]
> > > >> >>To:<[EMAIL PROTECTED]>
> > > >> >>
> > > >> >>Danny Mallory <[EMAIL PROTECTED]> wrote:
> > > >> >> >Assuming 216.68.165.38 is the mail server your questioning. I just
> > > >> >> >attempted to relay some
> > > >> >> >mail through it and got stopped with Require AUTH.
> > > >> >> >
> > > >> >> >The message could not be sent because one of the recipients was
> > > rejected
> > > >> >>by
> > > >> >> >the server. The rejected e-mail address was
> > > >> '[EMAIL PROTECTED]'.
> > > >> >>
> > > >> >> >Subject 'Testing 216.68.165.38 mail server', Account:
> > > 'letvffkeyit.com',
> > > >> >>
> > > >> >> >Server: '216.68.165.38', Protocol: SMTP, Server Response: '501 Invalid
> > > >>mail
> > > >> >>
> > > >> >> >recipient. Relay requires SMTP AUTH.', Port: 25, Secure(SSL): No,
> > >Server
> > > >> >>
> > > >> >> >Error: 501, Error Number: 0x800CCC79
> > > >> >> >
> > > >> >> >
> > > >> >> >Danny
> > > >> >> >
> > > >> >> >At 10/13/2001 02:05 PM, you wrote:
> > > >> >> >>Hello Danny, and thanks for the help. I am still using version 5.0
> > > >>here
> > > >> >>since
> > > >> >> >>it has been rock solid. I looked in my SMTP log and found one ip
> > >
> > > >> relaying
> > > >> >> >>a bunch of mail that were not for my users. I was under the
> > > impression
> > > >> >>that
> > > >> >> >>if the mail is not for a user of your system, that the smtp will
> > >not
> > > >>go
> > > >> >>
> > > >> >> >>through?
> > > >> >> >> Not sure what happened? . I thought if restrict ip address was
> > > left
> > > >> >>blank,
> > > >> >> >>an SMTP user may login from any host or has this changed with any
> > >newer
> > > >> >>
> > > >> >> >>version
> > > >> >> >>of Sambar? Thanks again have a great afternoon!
> > > >> >> >>Vince
> > > >> >> >>Danny Mallory <[EMAIL PROTECTED]> wrote:
> > > >> >> >> >Require auth overrides relaying. If someone compromised one of
> > >your
> > > >>email
> > > >> >> >>
> > > >> >> >> >addresses
> > > >> >> >> >and password then they could have sent mail. Also, not sure what
> > >
> > > >> version
> > > >> >> >>
> > > >> >> >> >your at but
> > > >> >> >> >there was a known issue with the IP address in the restrict IP
> > >cause
> > > >> >>to
> > > >> >> >>
> > > >> >> >> >open you up
> > > >> >> >> >for relay break both require auth and restrict relay..
> > > >> >> >> >
> > > >> >> >> >Try changing your restrict IP address to blank..
> > > >> >> >> >
> > > >> >> >> >Danny
> > > >> >> >> >
> > > >> >> >> >At 10/13/2001 01:03 PM, you wrote:
> > > >> >> >> >
> > > >> >> >> >>Hello everyone, and hope everyone is doing well?
> > > >> >> >> >>I have a question about smtp relay. I have been using Sambar
> > >for
> > > >>a
> > > >> >>while
> > > >> >> >> >>now, and all seemed to be working great. It sure is a great
> > > program.
> > > >> >>I
> > > >> >> >>haven't
> > > >> >> >> >>touched anything, so I am not sure how someone was successfull
> > >in
> > > >>using
> > > >> >> >>my
> > > >> >> >> >>sambar mail server as a relay? I did trace the ip and blocked
> > >it
> > > >>using
> > > >> >> >>
> > > >> >> >> >>Blackice,
> > > >> >> >> >>but I am concerned in this happening again with all these attacks
> > > >>going
> > > >> >> >>on
> > > >> >> >> >>such as the Red Worm etc!
> > > >> >> >> >>
> > > >> >> >> >>I am turning to my fellow sambar users for help. Here is what
> > >I
> > > >>have
> > > >> >>in
> > > >> >> >> >>my config file. Am I missing something? Thanks in advance
> > > >> >> >> >>
> > > >> >> >> >>Vince
> > > >> >> >> >>
> > > >> >> >> >>Run SMTPD: Yes
> > > >> >> >> >>Relay Delivery: Forward immediately
> > > >> >> >> >>Relay Domains: I don't have anything in here
> > > >> >> >> >>Use MTA: Yes
> > > >> >> >> >>Unknown Mailbox: Null
> > > >> >> >> >>Require Auth: Yes
> > > >> >> >> >>Restrict Relay: Yes
> > > >> >> >> >>Restrict Relay IP: 127.0.0.1
> > > >> >> >> >>Relay from User: I don't have anything here
> > > >> >> >> >>
> > > >> >> >> >>
> > > >> >> >> >>------------------------------------------------------------------
> > >
> > > >> ------
> > > >> >>
> > > >> >> >> --------
> > > >> >> >> >>For unsubscription of this list send an email to
> > > [EMAIL PROTECTED]
> > > >> >>with
> > > >> >> >>
> > > >> >> >> >>email
> > > >> >> >> >>data containing unsubscribe emailadd sambar
> > > >> >> >> >
> > > >> >> >> >
> > > >> >> >> >
> > > >> >> >> >
> > > >> >> >> >-------------------------------------------------------------------
> > >
> > > >> ------
> > > >> >>
> > > >> >> >> -------
> > > >> >> >> >For unsubscription of this list send an email to
> > > [EMAIL PROTECTED]
> > > >> >>with
> > > >> >> >>email
> > > >> >> >> >data containing unsubscribe emailadd sambar
> > > >> >> >> >
> > > >> >> >>
> > > >> >> >>
> > > >> >> >>------------------------------------------------------------------
> > > ------
> > > >>
> > > >> >> --------
> > > >> >> >>For unsubscription of this list send an email to [EMAIL PROTECTED]
> > > >>with
> > > >> >>
> > > >> >> >>email
> > > >> >> >>data containing unsubscribe emailadd sambar
> > > >> >> >
> > > >> >> >
> > > >> >> >
> > > >> >> >
> > > >> >> >-------------------------------------------------------------------
> > > ------
> > > >>
> > > >> >> -------
> > > >> >> >For unsubscription of this list send an email to [EMAIL PROTECTED]
> > > >>with
> > > >> >>email
> > > >> >> >data containing unsubscribe emailadd sambar
> > > >> >> >
> > > >> >>
> > > >> >>
> > > >> >>------------------------------------------------------------------------
> > >
> > > >> --------
> > > >> >>For unsubscription of this list send an email to [EMAIL PROTECTED]
> > >with
> > > >>
> > > >> >>email
> > > >> >>data containing unsubscribe emailadd sambar
> > > >> >
> > > >> >
> > > >> >
> > > >> >
> > > >> >-------------------------------------------------------------------------
> > >
> > > >> -------
> > > >> >For unsubscription of this list send an email to [EMAIL PROTECTED]
> > >with
> > > >>email
> > > >> >data containing unsubscribe emailadd sambar
> > > >> >
> > > >>
> > > >>
> > > >>------------------------------------------------------------------------
> > > --------
> > > >>For unsubscription of this list send an email to [EMAIL PROTECTED] with
> > >
> > > >>email
> > > >>data containing unsubscribe emailadd sambar
> > > >
> > > >
> > > >
> > > >
> > > >-------------------------------------------------------------------------
> > > -------
> > > >For unsubscription of this list send an email to [EMAIL PROTECTED] with
> > >email
> > > >data containing unsubscribe emailadd sambar
> > > >
> > >
> > >
> > >--------------------------------------------------------------------------------
> > >For unsubscription of this list send an email to [EMAIL PROTECTED] with
> > >email
> > >data containing unsubscribe emailadd sambar
> >
> > --------------------------------------------------------------------------------
> > For unsubscription of this list send an email to [EMAIL PROTECTED] with email
> > data containing unsubscribe emailadd sambar
>
>
>
> --------------------------------------------------------------------------------
> For unsubscription of this list send an email to [EMAIL PROTECTED] with email
> data containing unsubscribe emailadd sambar
>
>
--------------------------------------------------------------------------------
For unsubscription of this list send an email to [EMAIL PROTECTED] with email
data containing unsubscribe emailadd sambar
- Re: [sambar] SMTP Relay problem? Danny Mallory
- Re: [sambar] SMTP Relay problem? gateway
- Re: [sambar] SMTP Relay problem? Danny Mallory
- Re: [sambar] SMTP Relay problem? gateway
- Re: [sambar] SMTP Relay problem? Danny Mallory
- Re: [sambar] SMTP Relay problem? Windjammer
- Re: [sambar] SMTP Relay problem? gateway
- Re: [sambar] SMTP Relay problem? gateway
- Re: [sambar] SMTP Relay problem? steffen
- Re: [sambar] SMTP Relay problem? gateway
- Jim Burns
