Hello,
On Sep 16 09:15 Andreas Moroder wrote (excerpt):
I use SuSE 42.3 64 bit with kernel 4.4.143-65-default #1 SMP and sane-backend 1.0.24
in the openSUSE Build Service (OBS) development project "graphics" we (i.e. openSUSE) provide the current sane-backends-1.0.27, cf. http://www.sane-project.org/ also for openSUSE Leap 42.3 x86_64, see the section "RPM packages of the "sane-backends" scanner drivers" in https://en.opensuse.org/SDB:Configuring_Scanners
It worked well for long time, but since beginning of September I get a invalid argument error. scanimage -L returns device `pixma:MX920_192.168.1.66' is a CANON Canon PIXMA MX920 Series multi-function peripheral but when I try to scan I get scanimage --device="pixma:MX920_192.168.1.66" --format=TIFF > x.tiff scanimage: open of device pixma:MX920_192.168.1.66 failed: Invalid argument
See the section "Trouble-Shooting (Debugging)" at https://en.opensuse.org/SDB:Configuring_Scanners First of all I would try to connect the scanner via USB, preferably via a real USB 2 port, see the section "USB" in https://en.opensuse.org/SDB:Configuring_Scanners If the scanner works again when connected via USB, the root cause is likely related to the changes in your networking layer, cf. the section "Scanning via Network" in https://en.opensuse.org/SDB:Configuring_Scanners
I suppose a SuSE update caused this but I don't know what config files I should check or change.
To see what latest RPM packages have been installed run # rpm -qa --last | less Kind Regards Johannes Meixner -- SUSE LINUX GmbH - GF: Felix Imendoerffer, Jane Smithard, Graham Norton - HRB 21284 (AG Nuernberg) -- sane-devel mailing list: [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
