Hello. I am having some trouble trying to get my G3000 series (G3111) pixma scanner recognized:
henry@BEHEMOTH:~$ scanimage -L [bjnp] udp_command: ERROR - no data received (timeout = 10000) [bjnp] bjnp_init_device_structure: Cannot read mac address, skipping this scanner [bjnp] udp_command: ERROR - no data received (timeout = 10000) [bjnp] add_scanner: ERROR - Cannot read scanner make & model: bjnp:// 192.168.1.36:8612/timeout=10000 No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). henry@BEHEMOTH:~$ cat /etc/sane.d/pixma.conf # pixma.conf configuration for the sane pixma backend # # bjnp-timeout=5000 # Specify the timeout (in ms) to be used for all the folllowing # scanners. # May be specified multiple times. # The last value (if any) will be used for auto-detection # # define URI's of scanners (one per line) # This is only used for network scanners. # normally scanners will be detected by sending a broadcast # if this does not work under your OS, or if the scanners # are on a different subnet, configure your scanners URI here # # method must be bjnp # port number can normally be left out, port 8612 is used as default # The timeout parameter sets a timeout value for the scanner on # the same line # Example: # bjnp://myscanner.my.domain:8612 // uses the default 1000ms timeout # bjnp-timeout=5000 # bjnp://printer-1.pheasant.org // will use the 5000 ms timeout # bjnp://scanner.bad-network.org/timeout=1500 // timeout set to 1500 ms # bjnp-timeout=3000 // will be used for auto-detected scanners # bjnp://192.168.1.36 Wifi printer is working ok, but not the scanner.
-- sane-devel mailing list: [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
