Not at all (thank u very much anyway) I compiled software, rebooted,
checked firewall (sane) but simple-scanner ip continues to not connect
to scanner (Windows how said works). Do u perhaps know if is there
something (like Windows driver) Wia or Twain (for Linux) that allow
network connection?
Furthermore (I sent attached request to Redhat group list) do u know
about that issue if is there some driver to use file system
map/passtrough like example in Virtualbox?
Thank u in advance
Regards
Gianni Cerato
giannicerato.com
Il giorno ven, 06/03/2020 alle 13.36 +0300, Stanislav ha scritto:
> Hi Gianni,
>
> The patch is trivial and can be found here:
> https://gitlab.com/yu_stas/backends/-/commit/2906fb3f7355ef300ab3728e8a019d255c79341a
>
> Please keep me informed whether it helps or not.
>
> /Stas
>
>
> 06.03.2020, 04:57, "Gianni Cerato" <[email protected]>:
> > Hi Stan,
> > thanks I may know to build (u mean update from gitlab?). Tareas is
> > a Twain executive file for Windows that works with lan address. Of
> > course I do not think it will work in Linux.
> > If u send me link I will try your code and let you know.
> > Regards
> >
> > Gianni
> >
> >
> > giannicerato.com
> > Inviato dal mio dispositivo Samsung
> >
> >
> > -------- Messaggio originale --------
> > Da: Stanislav <[email protected]>
> > Data: 05/03/20 09:44 (GMT+01:00)
> > A: Gianni Cerato <[email protected]>, Thierry HUCAHRD <
> > [email protected]>
> > Cc: Olaf Meeuwissen <[email protected]>,
> > [email protected], sane-devel <
> > sane-devel-bounces+thierry=substantiel...@alioth-lists.debian.net>
> > Oggetto: Re: [sane-devel] Ricoh SP204SN AIO network scanner
> >
> > Hi Gianni,
> >
> > If you know how to update and build the source code, I can give you
> > a hint how to update ricoh2 backend to check if it supports your
> > scanner.
> > If not - I can do that by myself, but I will hardly have free time
> > until the weekend.
> >
> > /Stanislav
> >
> >
> > 05.03.2020, 03:45, "Gianni Cerato" <[email protected]>:
> > > Good morning and thanks all for answer.
> > > This is a Windows driver only compatibility device. But I can
> > > print
> > > following a Github project.
> > > Just I am reading on SANE about network SCSI interface (or USB
> > > ricoh2)
> > > instead of ethernet/lan does it make same thing?
> > > http://www.sane-project.org/man/sane-ricoh.5.html ricoh
> > > http://www.sane-project.org/man/sane-ricoh2.5.html ricoh2 (404
> > > error
> > > page not found)
> > > Do u perhaps have some code (readme howto) on gitlab (it is
> > > different
> > > from github)?
> > > Has drivers to be developed/debugged meaning compiled?
> > > Sorry but SANE has no detailed information for special devices
> > > and all
> > > documentation show about scsi or usb.
> > > Actually I connected it with usb cable (0x05ca/0x043f) but
> > > simple-scan
> > > still does not detect scanner
> > > Thanks in advance
> > >
> > > Gianni Cerato
> > > giannicerato.com
> > >
> > >
> > > Il giorno dom, 01/03/2020 alle 23.15 +0100, Thierry HUCAHRD ha
> > > scritto:
> > > > Le 2020-03-01 21:06, Stanislav a écrit :
> > > > > There's definitely some chance this scanner is supported by
> > > > ricoh2.
> > > > > Last year we found three more models are supported by this
> > > > backend,
> > > > > so
> > > > > SP204 might also be compatible.
> > > > Hi
> > > > It may be compatible with the ricoh2 backend.
> > > > It is not referenced as being supported by eSCL/Airscan.
> > > > The documentation says it is Microsoft compatible. There is a
> > > > possibility that it is WSD compatible.
> > > > > /Stanislav
> > > > >
> > > > > 29.02.2020, 14:19, "Olaf Meeuwissen" <
> > > > [email protected]>:
> > > > >
> > > > > > Hi,
> > > > > >
> > > > > > Gianni Cerato writes:
> > > > > >
> > > > > > > Good morning may u know if perhaps there is a way to
> > > > connect
> > > > > > > simple-
> > > > > > > scan in Debian with above (mentioned in object) all-in-
> > > > one
> > > > > > > Ricoh?
> > > > > > > Thanks in advance
> > > > > >
> > > > > > This scanner is not known to work with sane-backends-
> > > > 1.0.29.
> > > > > > However,
> > > > > > for scans via a network connection, it might work via the
> > > > escl
> > > > > > backend.
> > > > > > Alternatively, you could use the separately maintained
> > > > airscan
> > > > > > backend,
> > > > > > available at
> > > > > >
> > > > > > https://github.com/alexpevzner/sane-airscan
> > > > > >
> > > > > > Note that both backends assume the device uses the eSCL
> > > > (aka
> > > > > > AirScan
> > > > > > or
> > > > > > AirPrint scanning) protocol.
> > > > > >
> > > > > > @yu-stas Is there any chance this device might (be made
> > > > to) work
> > > > > > with
> > > > > > the ricoh2 backend?
> > > > > >
> > > > > > Hope this helps,
> > > > > > --
> > > > > > Olaf Meeuwissen, LPIC-2 FSF Associate Member since 2004-
> > > > 01-27
> > > > > > GnuPG key: F84A2DD9/B3C0 2F47 EA19 64F4 9F13 F43E B8A4
> > > > A88A F84A
> > > > > > 2DD9
> > > > > > Support Free Software https://my.fsf.org/donate
> > > > > > Join the Free Software Foundation https://my.fsf.org/join
> > >
> > >
--- Begin Message ---
Good morning can not (find and) install win 10 driver requested
PCI\VEN_1AF4&DEV_1049&CC_0002
https://devicehunt.com/view/type/pci/vendor/1AF4
in win.iso downloaded from redhat seems there is no driver .inf about file
system pci devide
May u light up me?
Thank u in advance
Regards
--
Gianni Cerato
giannicerato.com
Questo messaggio di posta elettronica contiene informazioni di
carattere confidenziale rivolte esclusivamente al destinatario sopra
indicato. E' vietato l'uso, la diffusione, distribuzione o
riproduzione da parte di ogni altra persona. Nel caso aveste ricevuto
questo messaggio di posta elettronica per errore, siete pregati di
segnalarlo immediatamente al mittente e distruggere quanto ricevuto
(compresi i file allegati) senza farne copia. Qualsivoglia utilizzo non
autorizzato del contenuto di questo messaggio costituisce violazione
dell'obbligo di non prendere cognizione della corrispondenza tra altri
soggetti, salvo più grave illecito, ed espone il responsabile alle
relative conseguenze. Grazie anticipatamente per la collaborazione.
Confidentially notice. This e-mail transmission may
contain legally privileged and/or confidential information. Please do
not read it if you are not the intended recipient(S). Any use,
distribution, reproduction or disclosure by any other person is
strictly prohibited. If you have received this e-mail in error,
please notify the sender and destroy the original transmission and its
attachments without reading or saving it in any manner. Thank you in
advance for your cooperation.
--- End Message ---
