On Sunday 14 Oct 2001 12:31 pm, Jochen Eisinger wrote: > In the file mustek_pp.conf you've also specified the name for the > scanner, which you want to use, for example "name SM-1200CP", then you > have to use the device mustek_pp:SM-12000CP. Furthermore, you can only > access the scanner as root. To allow users to scan, you have to setup > the SANE Network Scanner daemon. Descriptions of how to do this can be > found in the man-pages saned, sane-net & sane-mustek_pp or on the > web-page http://home.nexgo.de/jochen.eisinger/saned/ Jochen,
thanks for this but it still reports no devices available. the command I'm entering (as root) is xsane -d mustek:1200CP. Please can you advise on the following is my mustek_pp.conf from /etc/sane.d JIm # For documentation see sane-mustek_pp(5) # GLOBAL # # option io-mode [mode] must come before all port definitions, or it won't # have the effect you'd expect # enable this option, if you think your scanner supports the UNI protocol # note however that this might disable the better EPP protocol #option io-mode try_mode_uni # choose between two different ways to lock to port option io-mode alt_lock # set the maximal height (in lines) of a strip scanned (default: no limit) #option strip-height 0 # wait n msecs for bank to change (default: 700 msecs) # if this value is to low, stripes my appear in the scanned image #option wait-bank 700 # size (in bytes) of scan buffer (default: 1 megabyte) #option buffer 1048576 # try to avoid to heavy load. Note that this reduces scan speed option niceload # Define the time the lamp has to be on before scan starts (default 5 secs) #option wait-lamp 5 # DEVICES # # specify the port your scanner is connected to. Possible are 0x378 (lp1) # 0x278 (lp2) and 0x3bc (lp0) port 0x3bc # the following options are local to this scanner # WELL KNOWN OPTIONS # # most scanners only need 200 - 250 msecs to change bank -> try it out # Mustek 1200CP (CIS Chipset) name 1200CP vendor Mustek option cis1200 # scan maximal 16 lines for one sane_read() call option strip-height 16 # we just need 16 lines * 3 (rgb) colors * 300 dpi * 8.5 inch bytes option buffer 122400 # Enable this option, if you want user authentification *and* if it's # enabled at compile time #option auth # use this option to define the maximal black value for lineart scans #option bw 127