just an idea: The SM3800 (which is also unsupported) is based on the SCAN 08 chip and h= as (vendor =3D0x05da, product =3D 0x30ce)
A little info is on: http://www.sq.com.tw/products/spec/scan08Spec.PDF Karsten On Thursday 27 February 2003 11:31, Henning Meier-Geinitz wrote: > Hi, > > Does anyone knows what chip is used by the MicroTek Scanmaker 4800? > Looks like it's not supported yet. Someone asked on usenet for that > scanner and provided the following output of /proc/bus/usb/devices: > > T: Bus=3D01 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 2 Spd=3D12 = MxCh=3D 0 > D: Ver=3D 1.10 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff MxPS=3D 8 #Cfgs=3D = 1 > P: Vendor=3D05da ProdID=3D30cf Rev=3D 1.00 > S: Product=3DScanMaker 4800 > C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3De0 MxPwr=3D100mA > I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driv= er=3D(none) > E: Ad=3D81(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms > E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms > E: Ad=3D83(I) Atr=3D03(Int.) MxPS=3D 1 Ivl=3D3ms > > Bye, > Henning > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel