Hi, On Sun, Jun 08, 2003 at 10:44:42AM +0000, Michael Rasile wrote: > found USB scanner (vendor=0x04a9 produce=0x220e at /dev/usb/scanner0 > at /dev/usbscanner0
Ok, so the kernel USB scanner driver found it. > > Which version of sane-backends do you use (scanimage --version)? > > > backend version 1.0.9 Oh. Are you sure that this version supports your scanner? I can't find "Lide" on the list of supported scanners for 1.0.9. 1.0.12 is the current version of sane-backends but 1.0.10 may also work. But I'm not an plustek expert... > Thanks very much for your response. I apologize if I sent > this to the wrong list. Well, sane-devel is ok. Just don't send your answers to only me, because on the sane-devel mailing list there are more people (e.g. the plustek maintainer) who know much more about your scanner and the plustek backend. That's why I cc to the list again. > This will be the last time I'll post > here.I'll monitor sane-devel mailing list and figure it out. Please > find attached the debug output. If I am sending this to the wrong > place again, please tell me and I will not do so again. Just send it to sane-de...@mostang.com. That's the mailing list address. Not (only) to henn...@meier-geinitz.de :-) > Even though I haven't solved the scanner problem yet, I am learning > something from this. When it is solved, maybe I can help someone else > with similar problems. That's very good. We need more people like you! > [plustek] >[usb] 0x04a9 0x220e< Ok, that should be your scanner. > [plustek] next device is a USB device (0x04A9-0x220E) > [plustek] next device is an USB device > [plustek] ># - device devicename< > [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< > [plustek] ># [usb] 0x07B3 0x0017< > [plustek] >device /dev/usbscanner0< > [plustek] Decoding device name >/dev/usbscanner0< [...] > [plustek] attach (/dev/usbscanner0, 0xbfffd170, (nil)) > [plustek] Device configuration: > [plustek] device name : >/dev/usbscanner0< > [plustek] porttype : 1 > [plustek] USB-ID : >0x04A9-0x220E< [...] > [plustek] usbDev_open(/dev/usbscanner0,0x04A9-0x220E) > [plustek] Vendor ID=0x04A9, Product ID=0x220E > [plustek] Device >0x04A9-0x220E<, is not supported! Looks like your backend is really too old. Bye, Henning