Hi, On: Mon, 02 Feb 2004 12:03:18 -0800, Thomas Frayne <t...@sjpc.org> wrote: > I have an HP 7450C scanner connected via USB 2.0, Fedora Core 1, and = am > installing sane-backends-0.1.13. man sane-avision says that it is > obsolete to access the HP 7450C via hpusbscsi. sane-find-scanner fou= nd > SCSI scanner "hp scanjet 7400c 0.8S" at /dev/scanner, /dev/sg5, and > /dev/sgf. It found USB scanner (vendor=3D0x03f0 [hp], product=3D0x08= 01 [hp > scanjet 7400c]) at libusb:001:003 > scanimage -L returned device `avision:/dev/sg5' is a Hewlett-Packard > ScanJet 7400c flatbed scanner. How can I make sure the scanner will = not > be accessed via the SCSI emulation? =
rmmod hpuscsi (or remove the module - configure the hotplug system to not load it ...) and set correct persmissions for /proc/bus/usb/x/y. x/y depends on the id your scanner got in your system. Sincerely yours, Ren=E9 Rebe - ROCK Linux stable release maintainer -- = Ren=E9 Rebe - Europe/Germany/Berlin r...@rocklinux.org r...@rocklinux-consulting.de http://www.rocklinux.org http://www.rocklinux-consulting.de http://gsmp.tfh-berlin.de/gsmp http://gsmp.tfh-berlin.de/rene