On Sat, 2004-08-28 at 14:50, Erik P. Olsen wrote: > On Thu, 2004-08-26 at 19:33, René Rebe wrote: > > Hi, > > > > Erik P. Olsen wrote: > > > > > I don't think this is true. I am running the latest bleeding edge > > > backend from > > > http://svn.rocklinux-consulting.de/sane-avision/trunk/backend/ > > > with my HP 7400c and I first thought that it had been corrected. But it > > > turned out to be true only after a reboot and subsequent scans performed > > > after the lamp had cooled off had the old problem: scanner stops halfway > > > through in a horrible noise which you have to stop by pulling the plug. > > > After switching it on again it pauses for 90 sec. before doing a correct > > > scan and so it does at all following scans - pausing 90 sec. that is. It > > > is only back to normal after a reboot. > > > > Hm - it fixed it for my test scanner here. If it still happens on your > > side it would be nice if you could debug why this still happens. > > OK, log attached with SANE_DEBUG_AVISION=7. Used xsane to produce the > problem. The scenario was as follows: > > 1. Reboot > 2. Correct scan > 3. Wait half an hour > 4. Incorrect scan, stopped half way through with this horrible noice. > 5. Pulled the plug. > > The scan was performed on a full A4-size document. If I reduce the scan > to, say, 5 by 5 mm the problem never occurs. > > Please let me know if you also need to see the image.
I installed from CVS, and am getting similar problems. Let me know if you need another trace.
