il 23/09 14:55, Henning Meier-Geinitz scrisse: > Could you try again with the current snapshot? The error from > usb_set_configuration is now ignored. i can't test this so please tell > us if it works even if usblp is running.
I've tried just now with sane-backends-2005-09-23; it works very well with usblp.ko loaded module. Thank you Henning. So, resuming, there are two possibilities for this MFP to work: 1) sane-backends < 2005-09-23 & loaded usblp.ko & real device /dev/usb/lp0 created & stock cups-1.1.23 & Device URI usb:/dev/usb/lp0 in cups web-config 2) sane-backends-2005-09-23 & removed usblp.ko & real device /dev/usb/lp0 not created & cups-1.1.23 with Couriousous' usb-libusb.c & Device URI usb://EPSON/Stylus%20CX3200 in cups web-config P.S.: It seems that all of my today new sent messages were bounced by the postmaster before arriving to ML, because of sane-devel@lists.alioth.debian.org; Failed; 5.4.0 (other or undefined network or routing status) Indeed there are three hosts down among *qwest.net and *debian.org So, FYI I'll send you a mail sent to Till and Couriousous: ----- Forwarded message ----- > Subject: Re: [sane-devel] Epson CX3200's scanner isn't detected with recent > From: LukenShiro <xxx@xxx> > Date: Fri, 23 Sep 2005 12:49:53 +0200 > To: sane-devel@lists.alioth.debian.org > Cc: Till Kamppeter <xxx@xxx>, Couriousous <xxx@xxx> > > il 23/09 00:39, Till Kamppeter scrisse: > > Couriousous, here is again a case for your libusb-based CUPS backend. > > > > LukenShiro, can you rebuild your CUPS "usb" backend with the following: > > > > http://www.linuxprinting.org/till/tmp/usb-libusb.c > [..] > > > > Then unload the "usblp" kernel module, restart CUPS and you should be > > able to print and to scan. > > Great :) > It seems working very well (BTW I'm using gutenprint 5.0.0-beta4 with > CUPS 1.1.23), I only have to change DeviceURI in cups web-configuration > to usb://EPSON/Stylus%20CX3200 (instead of file:/dev/usb/lp0, that > obviously isn't existing anymore), and blacklist "usblp" module in > hotplug not to get reloaded at every switch-on cycle. > Thank you Till and Couriousous! ----- End forwarded message -----