Hi Eric, sorry for the slow response. I think your issue no. 1 might^Wshould be fixed in my code from:
http://svn.exactcode.de/sane-avision/trunk/backend/ If your problem no. 2 still exists in that code please drop me a note and I'll remove the dust from the HP 7400 in the corner and see what I can do. I plan to merge the most tested bits into SANE CVS before the code freeze. > 1. If using sane-avision backend with xsane scanning more than one > document, the second scan is always incorrect. It seems to scan half > speed and it stops approx. half way through the scan. I have to exit > xsane and reenter to get the second (and subsequent scans) correct. I > don't know whether the bug is in xsane or sane-avision but it's > apparently not correctly reset when the first scan is finished. > > 2. scanimage --mode Line | lpr produces an all black image. > > I use FC3 almost fully upgraded, sane-backends 1.0.15 and xsane 0.95 Yours, -- Ren? Rebe - Rubensstr. 64 - 12157 Berlin (Europe / Germany) http://www.exactcode.de | http://www.t2-project.org +49 (0)30 255 897 45 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051127/ff9183a2/attachment.pgp From e...@epo.dk Mon Nov 28 01:04:25 2005 From: e...@epo.dk (Erik P. Olsen) Date: Mon Nov 28 01:04:34 2005 Subject: [Fwd: [sane-devel] Two problems scanning hp scanjet 7400c] In-Reply-To: <200511272258.05546.r...@exactcode.de> References: <1133127021.17361.6.ca...@epo.dk> <200511272258.05546.r...@exactcode.de> Message-ID: <1133139865.17361.20.ca...@epo.dk> Hi Ren?, On Sun, 2005-11-27 at 22:58 +0100, Ren? Rebe wrote: > Hi Eric, > > sorry for the slow response. I think your issue no. 1 might^Wshould be > fixed in my code from: > > http://svn.exactcode.de/sane-avision/trunk/backend/ This was even worse. Now the scanner won't start. I am getting an error box saying: "Failed to start scanner. Error during device I/O". I've sent you in a separate mail a debug listing of this new problem. > > If your problem no. 2 still exists in that code please drop me a note > and I'll remove the dust from the HP 7400 in the corner and see what > I can do. As the scanner doesn't start I cannot test problem no. 2. > > I plan to merge the most tested bits into SANE CVS before the code freeze. > > > 1. If using sane-avision backend with xsane scanning more than one > > document, the second scan is always incorrect. It seems to scan half > > speed and it stops approx. half way through the scan. I have to exit > > xsane and reenter to get the second (and subsequent scans) correct. I > > don't know whether the bug is in xsane or sane-avision but it's > > apparently not correctly reset when the first scan is finished. > > > > 2. scanimage --mode Line | lpr produces an all black image. > > > > I use FC3 almost fully upgraded, sane-backends 1.0.15 and xsane 0.95 > > Yours, -- Regards, Erik P. Olsen
