Hello, I cannot get my Epson 3490 to run (see log below). Different from the other two posters with 3490-problems in the last week, it doesn't even get to the firmware-download.
Any help is much appreciated! Please cc me on answers. Thanks! - Gerrit houdini:~# tail -n 15 /var/log/syslog Mar 4 22:24:37 localhost kernel: hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0004 Mar 4 22:24:37 localhost kernel: ohci_hcd 0000:02:06.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS Mar 4 22:24:37 localhost kernel: hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s Mar 4 22:24:37 localhost kernel: hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 Mar 4 22:24:37 localhost kernel: ohci_hcd 0000:02:06.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS Mar 4 22:24:37 localhost kernel: usb 2-2: new full speed USB device using ohci_hcd and address 12 Mar 4 22:24:37 localhost kernel: ohci_hcd 0000:02:06.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS Mar 4 22:24:37 localhost kernel: usb 2-2: default language 0x0409 Mar 4 22:24:37 localhost kernel: usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0 Mar 4 22:24:37 localhost kernel: usb 2-2: Product: EPSON Scanner Mar 4 22:24:37 localhost kernel: usb 2-2: Manufacturer: EPSON Mar 4 22:24:37 localhost kernel: usb 2-2: hotplug Mar 4 22:24:37 localhost kernel: usb 2-2: adding 2-2:1.0 (config #1, interface 0) Mar 4 22:24:37 localhost kernel: usb 2-2:1.0: hotplug Mar 4 22:24:37 localhost kernel: hub 2-0:1.0: state 5 ports 2 chg 0000 evt 0004 houdini:~# uname -a Linux houdini 2.6.12.3 #5 SMP Sat Aug 27 11:58:55 CEST 2005 i686 GNU/Linux houdini:~# lsusb Bus 002 Device 012: ID 04b8:0122 Seiko Epson Corp. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 0c45:1050 Microdia Bus 001 Device 002: ID 045e:001e Microsoft Corp. IntelliMouse Explorer Bus 001 Device 001: ID 0000:0000 houdini:~# dpkg -l|grep sane-backends ii sane-backends cvs060304-1 Package created with checkinstall 1.5.3 houdini:~# export SANE_DEBUG_SNAPSCAN=255 houdini:~# scanimage -d snapscan:libusb:002:012 [sanei_debug] Setting debug level of snapscan to 255. [snapscan] sane_snapscan_init [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53 [snapscan] add_usb_device(/dev/.static/dev/usb/scanner0 bus=usb) [snapscan] add_usb_device: Detected (kind of) an USB device [snapscan] snapscani_usb_open(/dev/.static/dev/usb/scanner0) [snapscan] add_usb_device: error opening device /dev/.static/dev/usb/scanner0: Invalid argument [snapscan] add_usb_device(libusb:002:012) [snapscan] add_usb_device: Detected (kind of) an USB device [snapscan] snapscani_usb_open(libusb:002:012) [snapscan] add_usb_device: Checking if 0x04b8 is a supported USB vendor ID [snapscan] snapscani_check_device() [snapscan] mini_inquiry [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0xbff78ac2,6,0xbff78a9e,0xbff78ac8 (36)) [snapscan] atomic_usb_cmd(0,0xbff78ac2,6,0xbff78a9e,0xbff78ac8 (36)) [snapscan] usb_cmd(0,0xbff78ac2,6,0xbff78a9e,0xbff78ac8 (36)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x45 0x50 ... [snapscan] Read 36 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] snapscani_check_device: Is vendor "EPSON" model "EPSON Scanner" a supported scanner? [snapscan] snapscani_get_model_id(EPSON Scanner, 0, 2) [snapscan] snapscani_get_model_id: looking up scanner for ID 0x04b8,0x0122. [snapscan] snapscani_get_model_id: scanner identified [snapscan] snapscani_check_device: Autodetected driver: Perfection 3490 [snapscan] snapscani_usb_close(0) [snapscan] 1st read 3 write 1 [snapscan] snapscani_usb_cmd(0,0xbff78afe,6,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0xbff78afe,6,0x0,0x0 (0)) [snapscan] usb_cmd(0,0xbff78afe,6,0x0,0x0 (0)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] 2nd read 4 write 2 [snapscan] snapscani_init_device_structure() [snapscan] sane_snapscan_open (libusb:002:012, 0xbff79ce8) [snapscan] find_device [snapscan] sane_snapscan_open: Allocating 129024 bytes as scanner buffer. [snapscan] sane_snapscan_open: allocated scanner structure at 0x8053b40 [snapscan] open_scanner [snapscan] snapscani_usb_open(libusb:002:012) [snapscan] sane_snapscan_open: waiting for scanner to warm up. [snapscan] wait_scanner_ready [snapscan] test_unit_ready [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0xbff79af6,6,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0xbff79af6,6,0x0,0x0 (0)) [snapscan] usb_cmd(0,0xbff79af6,6,0x0,0x0 (0)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] sane_snapscan_open: performing scanner self test. [snapscan] send_diagnostic [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0xbff79c84,6,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0xbff79c84,6,0x0,0x0 (0)) [snapscan] usb_cmd(0,0xbff79c84,6,0x0,0x0 (0)) [snapscan] sane_snapscan_open: self test passed. [snapscan] inquiry [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0x8053b70,6,0x805c9a8,0x8053c80 (139)) [snapscan] atomic_usb_cmd(0,0x8053b70,6,0x805c9a8,0x8053c80 (139)) [snapscan] usb_cmd(0,0x8053b70,6,0x805c9a8,0x8053c80 (139)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x8b 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] usb_read Only 64 bytes read [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x45 0x50 ... [snapscan] Read 64 bytes [snapscan] inquiry: snapscan_cmd command failed: Error during device I/O [snapscan] sane_snapscan_open: error in inquiry command: Error during device I/O scanimage: open of device snapscan:libusb:002:012 failed: Error during device I/O [snapscan] sane_snapscan_exit houdini:~# tail -n 1 /var/log/syslog Mar 4 22:26:54 localhost kernel: ohci_hcd 0000:02:06.1: urb f65931e0 path 2 ep1in 82160000 cc 8 --> status -75