I know I've sent mail about this to the list (it's in the archives) but I can't seem to find my reply in my mailbox anymore :-(
Anyway, here is the patch for epkowa.desc that I promised. The patch is against 1.11 in CVS. It incorporates information from epson.desc 1.26 and unsupported.desc 1.255. I've dropped the silly(?) notion that EPSON AVASYS' QA department decides the support :status of the devices listed and synchronised them with the contents in epson.desc. That leads to quite a lot of change, but I hope it is in the user's best interest. As I noticed an incorrect USB ID in epson.desc, I also attached a patch for that. The ID mentioned is the one for the GT-6600 (aka Perfection 610). Note that the Stylus CX6600 is also reported to have an ID of 0x0813 somewhere in the list archive. I didn't add this because epson_usb.c does not list it either. If some kind SANE developer could commit this, I'd be grateful. Hope this helps, -- Olaf Meeuwissen EPSON AVASYS Corporation, SE1 FSF Associate Member #1962 sign up at http://member.fsf.org/ GnuPG key: 6BE37D90/AB6B 0D1F 99E7 1BF5 EB97 976A 16C7 F27D 6BE3 7D90 Penguin's lib! -- I hack, therefore I am -- LPIC-2 -------------- next part -------------- --- ../../epkowa-1.11.desc 2006-06-15 16:45:23.000000000 +0900 +++ doc/epkowa.desc 2006-06-20 10:20:10.000000000 +0900 @@ -22,35 +22,28 @@ ;;; This list of devices was compiled from the following sources: ;;; -;;; * iscan-1.18.0/NEWS -;;; * iscan-1.18.0/doc/sane-epkowa.man -;;; * iscan-1.18.0/backend/epkowa_usb.c -;;; * sane-backends-1.0.15/backend/epson_usb.c -;;; * sane-backends-1.0.15/doc/descriptions/epson.desc +;;; * iscan-2.1.0/NEWS +;;; * iscan-2.1.0/doc/sane-epkowa.man +;;; * iscan-2.1.0/backend/epkowa_usb.c +;;; * sane-backends/backend/epson_usb.c (CVS 1.18) +;;; * sane-backends/doc/descriptions/epson.desc (CVS 1.26) ;;; * http://www.freecolormanagement.com/sane/supported.html ;;; * http://www.sane-project.org/lists/sane-mfgs-cvs.html#Z-EPSON ;;; * http://www.epsondevelopers.com/ ;;; * http://www.epson.com/ (several representative countries) ;;; * http://www.i-love-epson.co.jp/ +;;; * messages on the sane-devel and LinuxPrinting.org epson-list +;;; mailing lists ;; Backend data. ;; :backend "epkowa" -:version "1.18.0" -:url "http://www.avasys.jp/english/linux_e/dl_scan.html" +:version "2.1.0" +:url "http://www.avasys.jp/english/linux_e/index.html" -:comment "Based on the epson backend of sane-backends-1.0.15." +;:comment "Based on the epson backend of sane-backends-1.0.15." -; AFAIK, all devices listed on the sane-epkowa.man page have been -; tested by EPSON AVASYS Corporation but _only_ for SCSI and USB -; interfaces. The IEEE1394 and parallel interfaces have never been -; tested. These models have all been marked :complete (even though -; some are not really quite :complete). All other devices have, in -; principle, been marked as :unsupported. -; Devices supported by the epson backend (as of version 1.0.15 of -; sane-backends) as well as overseas versions of supported models -; have been marked :untested. ;; Device and manufacturer information. ;; @@ -78,16 +71,22 @@ ;; :model "Actionscanner II" -:interface "parallel" -:status :untested ; :good +:interface "parallel SCSI" +:status :good :comment "overseas version of the GT-5000" :model "AcuLaser CX11" :interface "USB" :usbid "0x04b8" "0x0815" -:status :complete +:status :good :comment "overseas version of the LP-A500" +:model "AcuLaser CX11NF" +:interface "USB" +:usbid "0x04b8" "0x0815" +:status :good +:comment "AcuLaser CX11 with network interface and fax<br>network interface not supported" + :model "CC-500L" ; product spec (JP) :interface "USB" :status :unsupported @@ -101,13 +100,13 @@ :model "CC-570L" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0802" -:status :untested ; :good +:status :good :comment "all-in-one" :model "CC-600PX" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0801" -:status :complete +:status :good :comment "all-in-one" :model "CC-700" ; product spec (JP) @@ -117,17 +116,21 @@ :model "ES-300C" :interface "SCSI parallel" -:status :untested ; :good +:status :good :comment "overseas version of the GT-6000" +:model "ES-300GS" +:interface "SCSI" +:status :good + :model "ES-600C" :interface "parallel" -:status :untested ; :good +:status :good :comment "overseas version of the GT-5400" :model "ES-800C" :interface "SCSI" -:status :untested ; :good +:status :good :comment "overseas version of the GT-8000" :model "ES-1000C" @@ -136,7 +139,7 @@ :model "ES-1200C" :interface "parallel" -:status :untested ; :good +:status :good :comment "overseas version of the GT-9000" :model "ES-2000" ; product spec (JP) @@ -153,22 +156,22 @@ :model "ES-6000" ; product spec (JP) :interface "SCSI" -:status :complete +:status :good :model "ES-6000H" ; product spec (JP) :interface "SCSI" -:status :complete +:status :good :comment "IEEE1394 untested" :model "ES-6000HS" ; product spec (JP) :interface "SCSI" -:status :complete +:status :good :comment "IEEE1394 untested" :model "ES-7000H" ; product spec (JP) :interface "SCSI USB" :usbid "0x04b8" "0x0126" -:status :complete +:status :good :comment "IEEE1394 untested; 100Base-TX/10Base-T unsupported" :model "ES-8000" @@ -178,28 +181,28 @@ :model "ES-8500" ; product spec (JP) :interface "SCSI USB" :usbid "0x04b8" "0x0109" -:status :complete +:status :good :comment "IEEE1394 untested" :model "ES-9000H" ; product spec (JP) :interface "SCSI" -:status :complete +:status :good :comment "IEEE1394 untested" :model "ES-10000G" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0129" -:status :complete +:status :good :comment "IEEE1394 untested<br>100Base-TX/10Base-T unsupported" :model "Expression 636" :interface "SCSI" -:status :untested ; :complete +:status :complete :comment "overseas version of the GT-9500" :model "Expression 800" ; command spec :interface "SCSI" -:status :untested ; :complete +:status :complete :comment "overseas version of the GT-9600" :model "Expression 836XL" ; command spec @@ -216,7 +219,7 @@ :model "Expression 1640XL" ; command spec :interface "SCSI USB" :usbid "0x04b8" "0x0109" -:status :complete +:status :good :comment "overseas version of the ES-8500<br>IEEE1394 untested" :model "Expression 1680" ; command spec @@ -225,44 +228,73 @@ :status :complete :comment "overseas version of the ES-2200<br>IEEE1394 untested" +:model "Expression 1680 Pro" +:interface "SCSI USB" +:status :untested +:comment "IEEE1394 option" + +:model "Expression 1680XL Pro" +:interface "SCSI USB" +:status :untested + :model "Expression 10000XL" ; command spec :interface "USB" :usbid "0x04b8" "0x0129" -:status :complete +:status :good :comment "overseas version of the ES-10000G<br>IEEE1394 untested; 100Base-TX/10Base-T unsupported" +:model "Expression 10000XL Graphic Arts" +:interface "USB IEEE1394" +:status :untested +:comment "Ethernet option" + +:model "Expression 10000XL Photo" +:interface "USB IEEE1394" +:status :untested +:comment "Ethernet option" + :model "F-3200" ; product spec (JP) :interface "USB IEEE1394" :status :unsupported :comment "Film scanner" +:model "F-3200 Photo" +:interface "USB IEEE1394" +:status :unsupported + :model "FilmScan 200" :interface "SCSI" :status :unsupported :comment "A better backend for the FilmScan 200 can be found at <A HREF=\"http://www.vjet.demon.co.uk/scanner/\">http://www.vjet.demon.co.uk/scanner/</A>." +:url "http://www.vjet.demon.co.uk/scanner/" + +:model "GT-2200" +:interface "USB" +:usbid "0x04b8" "0x0102" +:status :unsupported :model "GT-4000" :status :untested :model "GT-5000" -:interface "parallel" -:status :untested ; :good +:interface "parallel SCSI" +:status :good :model "GT-5400" :interface "parallel" -:status :untested ; :good +:status :good :model "GT-5500" :interface "SCSI" -:status :untested ; :good +:status :good :model "GT-6000" :interface "SCSI Parport" -:status :untested ; :good +:status :good :model "GT-6500" :interface "parallel" -:status :untested ; :good +:status :good :comment "overseas version of the GT-5400" :model "GT-6600U" ; product spec (JP) @@ -277,23 +309,23 @@ :model "GT-7000S" :interface "SCSI" -:status :untested ; :complete +:status :complete :model "GT-7000U" :interface "USB" :usbid "0x04b8" "0x0101" -:status :untested ; :complete +:status :complete :model "GT-7200U" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x010f" -:status :complete +:status :good :comment "requires a DFSG non-free module<br>also supported by the plustek backend" :model "GT-7300U" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x011d" -:status :complete +:status :good :comment "requires a DFSG non-free module<br>also supported by the plustek backend" :model "GT-7400U" ; product spec (JP) @@ -325,7 +357,7 @@ :model "GT-8000" :interface "SCSI" -:status :untested ; :good +:status :good :model "GT-8200U" ; product spec (JP) :interface "USB" @@ -335,7 +367,7 @@ :model "GT-8200UF" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0110" -:status :complete +:status :good :model "GT-8300UF" ; product spec (JP) :interface "USB" @@ -357,12 +389,12 @@ :model "GT-8700F" ; product spec (JP) :interface "SCSI USB" :usbid "0x04b8" "0x010a" -:status :complete +:status :good :comment "GT-8700U with TPU option bundled" :model "GT-9000" :interface "parallel" -:status :untested ; :good +:status :good :model "GT-9300UF" ; product spec (JP) :interface "USB" @@ -372,16 +404,16 @@ :model "GT-9400UF" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0116" -:status :complete +:status :good :comment "requires a DFSG non-free module" :model "GT-9500" :interface "SCSI" -:status :untested ; :complete +:status :complete :model "GT-9600" :interface "SCSI" -:status :untested ; :complete +:status :complete :model "GT-9700F" ; product spec (JP) :interface "USB" @@ -397,12 +429,12 @@ :model "GT-10000" :interface "SCSI" -:status :complete +:status :good :comment "overseas version of the ES-6000" :model "GT-10000+" ; command spec :interface "SCSI" -:status :complete +:status :good :comment "overseas version of the ES-6000H<br>IEEE1394 untested" :model "GT-12000" @@ -413,12 +445,12 @@ :model "GT-15000" ; command spec :interface "SCSI USB" :usbid "0x04b8" "0x0126" -:status :complete +:status :good :comment "overseas version of the ES-7000H<br>IEEE1394 untested" :model "GT-30000" ; command spec :interface "SCSI" -:status :complete +:status :good :comment "overseas version of the ES-9000H<br>IEEE1394 untested" :model "GT-F500" ; product spec (JP) @@ -460,15 +492,21 @@ :model "GT-X750" :interface "USB" :usbid "0x04b8" "0x0119" -:status :complete +:status :good :comment "requires a DFSG non-free module" :model "GT-X800" ; product spec (JP) :interface "USB IEEE1394" :usbid "0x04b8" "0x012a" -:status :good +:status :complete :comment "IEEE1394 untested<br>film area guide mode not supported" +:model "GT-X900" +:interface "USB IEEE1394" +:usbid "0x04b8" "0x012c" +:status :good +:comment "IEEE1394 untested" + :model "LP-7900CS" :status :untested :comment "business all-in-one; scanner is a ES-7000H" @@ -512,49 +550,73 @@ :model "LP-A500" :interface "USB" :usbid "0x04b8" "0x0815" -:status :complete +:status :good :comment "business all-in-one<br>network interface not supported" :model "LP-M5500" :interface "USB" :usbid "0x04b8" "0x0817" -:status :complete +:status :good :comment "business all-in-one<br>network interface not supported" :model "LP-M5500F" :interface "USB" :usbid "0x04b8" "0x0817" -:status :complete +:status :good :comment "business all-in-one<br>LP-M5500 with the fax option bundled<br>network interface not supported" :model "PM-A700" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0814" -:status :complete +:status :good +:comment "all-in-one" + +:model "PM-A750" +:interface "USB" +:usbid "0x04b8" "0x081a" +:status :good :comment "all-in-one" :model "PM-A850" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0806" -:status :complete +:status :good :comment "all-in-one" :model "PM-A870" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0811" -:status :complete +:status :good +:comment "all-in-one" + +:model "PM-A890" +:interface "USB" +:usbid "0x04b8" "0x081c" +:status :good :comment "all-in-one" :model "PM-A900" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x0810" -:status :complete +:status :good +:comment "all-in-one" + +:model "PM-A950" +:interface "USB" +:usbid "0x04b8" "0x081d" +:status :good :comment "all-in-one" :model "PX-A550" ; product spec (JP) :interface "USB" :usbid "0x04b8" "0x080e" -:status :complete +:status :good +:comment "all-in-one" + +:model "PX-A650" +:interface "USB" +:usbid "0x04b8" "0x0819" +:status :good :comment "all-in-one" :model "Perfection 600" @@ -570,13 +632,13 @@ :model "Perfection 636S" :interface "SCSI" -:status :untested ; :complete +:status :complete :comment "overseas version of the GT-7000S" :model "Perfection 636U" ; command spec :interface "USB" :usbid "0x04b8" "0x0101" -:status :untested ; :complete +:status :complete :comment "overseas version of the GT-7000U" :model "Perfection 640U" ; command spec @@ -587,6 +649,7 @@ :model "Perfection 660" :interface "USB" +:usbid "0x04b8" "0x0114" :status :unsupported :comment "supported by the snapscan backend" @@ -605,7 +668,7 @@ :interface "USB" :usbid "0x04b8" "0x0104" :status :complete -:comment "overseas version of the GT-7600UF" +:comment "overseas version of the GT-7600UF<br>Perfection 1200U with TPU option bundled" :model "Perfection 1240U" ; command spec :interface "USB" @@ -616,25 +679,25 @@ :model "Perfection 1250" :interface "USB" :usbid "0x04b8" "0x010f" -:status :complete +:status :good :comment "overseas version of the GT-7200U<br>requires a DFSG non-free module<br>also supported by the plustek backend" :model "Perfection 1250 PHOTO" :interface "USB" :usbid "0x04b8" "0x010f" -:status :complete +:status :good :comment "Perfection 1250 with TPU option bundled<br>requires a DFSG non-free module<br>also supported by the plustek backend" :model "Perfection 1260" :interface "USB" :usbid "0x04b8" "0x011d" -:status :complete +:status :good :comment "overseas version of the GT-7300U<br>requires a DFSG non-free module<br>also supported by the plustek backend" :model "Perfection 1260 PHOTO" :interface "USB" :usbid "0x04b8" "0x011d" -:status :complete +:status :good :comment "Perfection 1260 with TPU option bundled<br>requires a DFSG non-free module<br>also supported by the plustek backend" :model "Perfection 1270" @@ -642,6 +705,10 @@ :status :unsupported :comment "may be supported by the snapscan backend" +:model "Perfection 1600" +:interface "SCSI" +:status :unsupported + :model "Perfection 1640SU" ; command spec :interface "SCSI USB" :usbid "0x04b8" "0x010a" @@ -651,7 +718,7 @@ :model "Perfection 1640SU PHOTO" :interface "SCSI USB" :usbid "0x04b8" "0x010a" -:status :complete +:status :good :comment "overseas version of the GT-8700F" :model "Perfection 1650" ; command spec @@ -663,7 +730,7 @@ :model "Perfection 1650 PHOTO" :interface "USB" :usbid "0x04b8" "0x0110" -:status :complete +:status :good :comment "overseas version of the GT-8200UF" :model "Perfection 1660 PHOTO" ; command spec @@ -674,9 +741,16 @@ :model "Perfection 1670" :interface "USB" +:usbid "0x04b8" "0x011f" :status :unsupported :comment "supported by the snapscan backend" +:model "Perfection 1670 PHOTO" +:interface "USB" +:usbid "0x04b8" "0x011f" +:status :unsupported +:comment "may be supported by the snapscan backend" + :model "Perfection 2400 PHOTO" ; command spec :interface "USB" :usbid "0x04b8" "0x011b" @@ -704,7 +778,7 @@ :model "Perfection 3170 PHOTO" :interface "USB" :usbid "0x04b8" "0x0116" -:status :complete +:status :good :comment "overseas version of the GT-9400UF<br>requires a DFSG non-free module" :model "Perfection 3200 PHOTO" ; command spec @@ -734,7 +808,7 @@ :model "Perfection 4490 PHOTO" :interface "USB" :usbid "0x04b8" "0x0119" -:status :complete +:status :good :comment "overseas version of the GT-X750<br>requires a DFSG non-free module" :model "Perfection 4870 PHOTO" ; command spec @@ -749,6 +823,23 @@ :status :good :comment "overseas version of the GT-X800<br>IEEE1394 untested<br>film area guide mode not supported" +:model "Perfection 4990 Pro" +:interface "USB IEEE1394" +:status :untested +:comment "seems to be a 4990 PHOTO with additional software" + +:model "Perfection V700" +:interface "USB IEEE1394" +:usbid "0x04b8" "0x012c" +:status :good +:comment "overseas version of the GT-X900<br>IEEE1394 untested" + +:model "Perfection V750" +:interface "USB IEEE1394" +:usbid "0x04b8" "0x012c" +:status :good +:comment "overseas version of the GT-X900<br>IEEE1394 untested" + :model "Stylus CX1500" ; Australia :interface "USB" :status :unsupported @@ -757,199 +848,282 @@ :model "Stylus CX3100" :interface "USB" :usbid "0x04b8" "0x0802" -:status :untested ; :good +:status :good :comment "overseas version of the CC-570<br>all-in-one" :model "Stylus CX3200" :interface "USB" :usbid "0x04b8" "0x0802" -:status :untested ; :good +:status :good :comment "overseas version of the CC-570<br>all-in-one" :model "Stylus CX3500" ; Australia :interface "USB" :usbid "0x04b8" "0x080e" -:status :complete +:status :good :comment "all-in-one" :model "Stylus CX3600" ; UK :interface "USB" :usbid "0x04b8" "0x080e" -:status :complete +:status :good :comment "all-in-one" :model "Stylus CX3650" ; France :interface "USB" :usbid "0x04b8" "0x080e" -:status :unsupported +:status :good :comment "all-in-one" :model "Stylus CX3700" :interface "USB" :usbid "0x04b8" "0x0818" -:status :complete +:status :good :comment "all-in-one" :model "Stylus CX3800" :interface "USB" :usbid "0x04b8" "0x0818" -:status :complete +:status :good +:comment "all-in-one" + +:model "Stylus CX3810" +:interface "USB" +:status :untested +:comment "all-in-one" + +:model "Stylus CX4100" +:interface "USB" +:usbid "0x04b8" "0x0820" +:status :good +:comment "all-in-one" + +:model "Stylus CX4200" +:interface "USB" +:usbid "0x04b8" "0x0820" +:status :good :comment "all-in-one" :model "Stylus CX4500" :interface "USB" :usbid "0x04b8" "0x080d" -:status :complete +:status :good :comment "all-in-one" :model "Stylus CX4600" :interface "USB" :usbid "0x04b8" "0x080d" -:status :complete +:status :good :comment "all-in-one" +:model "Stylus CX4700" +:interface "USB" +:usbid "0x04b8" "0x0819" +:status :good +:comment "all-in-one<br>overseas version of the PX-A650" + +:model "Stylus CX4800" +:interface "USB" +:usbid "0x04b8" "0x0819" +:status :good +:comment "all-in-one<br>overseas version of the PX-A650" + :model "Stylus CX5100" :interface "USB" :usbid "0x04b8" "0x0801" -:status :complete +:status :good :comment "overseas version of the CC-600PX<br>all-in-one" :model "Stylus CX5200" :interface "USB" :usbid "0x04b8" "0x0801" -:status :complete +:status :good :comment "overseas version of the CC-600PX<br>all-in-one" :model "Stylus CX5300" :interface "USB" :usbid "0x04b8" "0x0801" -:status :complete +:status :good :comment "overseas version of the CC-600PX<br>all-in-one" :model "Stylus CX5400" :interface "USB" :usbid "0x04b8" "0x0801" -:status :complete -:comment "overseas version of the CC-600PX<br>all-in-one" +:status :good +:comment "overseas version of the CC-600PX<br>all-in-one<br>epson backend claims 0x0808 USB product ID" + +:model "Stylus CX5700F" +:interface "USB" +:comment "all-in-one" + +:model "Stylus CX5800F" +:interface "USB" +:comment "all-in-one" :model "Stylus CX6300" :interface "USB" :usbid "0x04b8" "0x0805" -:status :complete -:comment "all-in-one" +:status :good +:comment "all-in-one<br>mistakenly thinks its a PX-A650" :model "Stylus CX6400" :interface "USB" :usbid "0x04b8" "0x0805" -:status :complete -:comment "all-in-one" +:status :good +:comment "all-in-one<br>mistakenly thinks its a PX-A650" :model "Stylus CX6500" :interface "USB" :usbid "0x04b8" "0x0805" -:status :complete +:status :good :comment "all-in-one" :model "Stylus CX6600" :interface "USB" :usbid "0x04b8" "0x0805" -:status :complete +:status :good +:comment "all-in-one" + +:model "Stylus CX6600" +:interface "USB" +:usbid "0x04b8" "0x0813" +:status :good :comment "all-in-one" :model "Stylus CX7700" :interface "USB" :usbid "0x04b8" "0x081f" -:status :complete +:status :good :comment "all-in-one" :model "Stylus CX7800" :interface "USB" :usbid "0x04b8" "0x081f" -:status :complete +:status :good :comment "all-in-one" :model "Stylus DX3800" :interface "USB" :usbid "0x04b8" "0x0818" -:status :complete +:status :good :comment "all-in-one" +:model "Stylus DX3850" +:interface "USB" +;:usbid "0x04b8" "0x0818" +:status :good +:comment "all-in-one" + +:model "Stylus DX4200" +:interface "USB" +:usbid "0x04b8" "0x0820" +:status :good +:comment "all-in-one" + +:model "Stylus DX4800" +:interface "USB" +:usbid "0x04b8" "0x0819" +:status :good +:comment "all-in-one<br>overseas version of the PX-A650" + +:model "Stylus DX4850" +:interface "USB" +:usbid "0x04b8" "0x0819" +:status :good +:comment "DX4800 + card reader<br>all-in-one" + :model "Stylus Photo RX420" :interface "USB" :usbid "0x04b8" "0x080f" -:status :complete +:status :good :comment "all-in-one" :model "Stylus Photo RX425" ; France :interface "USB" :usbid "0x04b8" "0x080f" -:status :unsupported +:status :good :comment "all-in-one" :model "Stylus Photo RX430" ; Australia :interface "USB" :usbid "0x04b8" "0x080f" -:status :complete +:status :good :comment "all-in-one" :model "Stylus Photo RX500" :interface "USB" :usbid "0x04b8" "0x0807" -:status :complete +:status :good :comment "all-in-one" :model "Stylus Photo RX510" :interface "USB" :usbid "0x04b8" "0x0807" -:status :complete +:status :good :comment "all-in-one" :model "Stylus Photo RX520" :interface "USB" :usbid "0x04b8" "0x081a" -:status :complete +:status :good :comment "all-in-one" :model "Stylus Photo RX530" :interface "USB" :usbid "0x04b8" "0x081a" -:status :complete +:status :good :comment "all-in-one" :model "Stylus Photo RX600" :interface "USB" :usbid "0x04b8" "0x0806" -:status :complete +:status :good :comment "overseas version of the PM-A850<br>all-in-one" :model "Stylus Photo RX610" :interface "USB" :usbid "0x04b8" "0x0806" -:status :complete +:status :good :comment "overseas version of the PM-A850<br>all-in-one" :model "Stylus Photo RX620" :interface "USB" :usbid "0x04b8" "0x0811" -:status :complete +:status :good :comment "overseas version of the PM-A870<br>all-in-one" :model "Stylus Photo RX630" :interface "USB" :usbid "0x04b8" "0x0811" -:status :complete +:status :good :comment "overseas version of the PM-A870<br>all-in-one" +:model "Stylus Photo RX640" +:interface "USB" +:usbid "0x04b8" "0x081c" +:status :good +:comment "all-in-one<br>overseas version of the PM-A890" + +:model "Stylus Photo RX650" +:interface "USB" +:usbid "0x04b8" "0x081c" +:status :good +:comment "all-in-one<br>overseas version of the PM-A890" + :model "Stylus Photo RX700" :interface "USB" :usbid "0x04b8" "0x0810" -:status :complete +:status :good :comment "overseas version of the PM-A900<br>all-in-one" :model "Stylus Scan 2000" -:status :unsupported +:interface "USB" +:usbid "0x04b8" "0x0105" +:status :untested +:comment "apparently mostly the same as the Stylus Scan 2500" :model "Stylus Scan 2500" :interface "USB" :usbid "0x04b8" "0x0106" :status :untested +:comment "scanner is apparently a GT-7000" -------------- next part -------------- --- ../../epson-1.26.desc 2006-06-15 16:43:51.000000000 +0900 +++ doc/epson.desc 2006-06-20 10:24:45.000000000 +0900 @@ -278,5 +278,5 @@ :model "CX-6600" :interface "USB" -:usbid "0x04b8" "0x0103" +:usbid "0x04b8" "0x0805" :status :good From russbuc...@nwi.net Tue Jun 20 01:44:47 2006 From: russbuc...@nwi.net (Russbucket) Date: Tue Jun 20 01:45:27 2006 Subject: [sane-devel] [patch] epkowa.desc In-Reply-To: <877j3cobqx....@geek.avasys.jp> References: <877j3cobqx....@geek.avasys.jp> Message-ID: <200606191844.47590.russbuc...@nwi.net> On Monday 19 June 2006 18:29, Olaf Meeuwissen wrote: > I know I've sent mail about this to the list (it's in the archives) > but I can't seem to find my reply in my mailbox anymore :-( > > Anyway, here is the patch for epkowa.desc that I promised. The patch > is against 1.11 in CVS. It incorporates information from epson.desc > 1.26 and unsupported.desc 1.255. > > I've dropped the silly(?) notion that EPSON AVASYS' QA department > decides the support :status of the devices listed and synchronised > them with the contents in epson.desc. That leads to quite a lot of > change, but I hope it is in the user's best interest. > > As I noticed an incorrect USB ID in epson.desc, I also attached a > patch for that. The ID mentioned is the one for the GT-6600 (aka > Perfection 610). Note that the Stylus CX6600 is also reported to > have an ID of 0x0813 somewhere in the list archive. I didn't add > this because epson_usb.c does not list it either. > > If some kind SANE developer could commit this, I'd be grateful. > > Hope this helps, Does this mean the new version of Iscan will not work with a CX6600. I run the CX6600 with Iscan 1.18.0. I had to change the device ID to 0x0813 as that s what comes from the printer/scanner with the lsusb -v command Bus 004 Device 002: ID 04b8:0813 Seiko Epson Corp. and with sane-find-scanner found USB scanner (vendor=0x04b8 [EPSON], product=0x0813 [USB2.0 MFP(Hi-Speed)]) at libusb:004:002 The scanner work fine with Iscan, Kooka and xsane. I'm on SUSE 10.0. Should I upgrade to the new Iscan?? Thanks for any response -- Russ