Hi! I am the happy proprietor of a Lexmark x1250, all-in-one, fax, scanner, printer, (it washes, it passes, it kitchen... ; ) ) The printer is already working (with drive z600), but unhappily scanner is another story.
I installed the packages "sane" and "sane-utils" (by apt-get in Ubuntu 6.06 ). When I run xsane, it simply says that "no available device exist". The output from commands: #lsusb Bus 003 Device 003: ID 043d:007d Lexmark International, Inc. #sane-find-scanner found USB scanner (vendor=0x043d, product=0x007d, chip=rts8858c?) at libusb:003:003 #sudo lsusb -v -v Bus 003 Device 003: ID 043d:007d Lexmark International, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x043d Lexmark International, Inc. idProduct 0x007d bcdDevice 1.00 iManufacturer 1 Lexmark iProduct 2 X1200 Series iSerial 7 0L02KV4 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 6 USB SCANNER bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 9 Bulk-In Bulk-Out Interrupt-In Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 250 Device Status: 0x0001 Self Powered What can I do to improve debug, or make it works? Regards, Dalai Felinto Rio de Janeiro - Brasil http://blendermaniacos.blogspot.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20061205/62892365/attachment.html From azummo-li...@towertech.it Wed Dec 6 21:38:29 2006 From: azummo-li...@towertech.it (Alessandro Zummo) Date: Wed Dec 6 21:38:42 2006 Subject: [sane-devel] acbyteorder.m4 Message-ID: <20061206213829.66cf432d@inspiron> I've added an m4 macro that generates a byteorder.h file for endianness conversion. Someone needs to update the configure for me though :( we should really have an autogen.sh in the cvs and remove configure. -- Best regards, Alessandro Zummo, Tower Technologies - Turin, Italy http://www.towertech.it