On 9/6/07, cgi-mailer at kundenserver.de <cgi-mailer at kundenserver.de> wrote: > 1. Your email address: > 'jeremy at acjlaw.net' > 2. Manufacturer (e.g. "Mustek"): > 'Ricoh' > 3. Model name (e.g. ScanExpress 1200UB): > 'IS450DE' > 4. Bus type: > 'SCSI' > 5. Vendor id (e.g. 0x001): > '' > 6. Product id (e.g. 0x0002): > '' > 7. Chipset (e.g. lm9831): > '' > 8. Comments (e.g. similar to Mustek 1234): > 'I have a Ricoh Image Scanner IS450DE (Duplex with an Endorser) similar to > the IS450 (Simplex without Endorser) and IS450SE. It's a SCSI-2 scanner with > a flat bed and ADF and scans up to 11X17in (Ledger) @ 400dpiX400dpi in 256 > shades of gray. It's not listed on your list of supported scanners, although > the IS420/IS430 models have BASIC support. I was hoping that the scanning > functionality of this model would be similar and might be recognized by the > ibm sane-backend, but no such luck! The Endorser and Image Processing Unit > are not critical to me. If I can get raw pnm output I can manipulate the > images using my netpbm bash scripts.' > 9. Data (e.g. sane-find-scanner -v -v): > '#cat /proc/scsi/scsi > Host: scsi0 Channel: 00 Id: 05 Lun: 00 > Vendor: RICOH Model: IS450 Rev: 1R04 > Type: Scanner ANSI SCSI revision: 02 > > # scsi_info /dev/sg0 > SCSI_ID="0,5,0" > HOST="0" > MODEL="RICOH IS450" > FW_REV="1R04"' > >
join the sane mailing list, and start a discussion. as a first stab- you could try getting a debug log of the ibm backend in action: SANE_DEBUG_IBM=11 scanimage -L allan -- "The truth is an offense, but not a sin"