Hi there, i've some trouble with my HP ScanJet 6200C which is connected via USB to my PC.
First time i run 'sane-find-scanner' it's output is found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0201 [HP ScanJet 6200C]) at libusb:002:003 So i tried to run scanimage without any options (since i've only one scanner connected)...: > scanimage P4 # SANE data follows 2550 3507 scanimage: sane_read: Error during device I/O Ok, I/O errors are common these days, so i tried again, but it just said 'scanimage: no SANE devices found'. Running sane-find-scanner again outputs the following now: found USB scanner (vendor=0x03f0, product=0x0201) at libusb:002:003 What's gone wrong? I'm running Debian etch with Debian kernel 2.6.18-6-k7 on AMD with an nVidia MCP51 USB host controller. dmesg says: ohci_hcd 0000:00:0b.0: wakeup usb 2-1: new full speed USB device using ohci_hcd and address 3 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110 usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann rqt 128 rq 6 len 2 ret -110 I'm wondering if that error is sane or kernel-driven since sane-find-scanner seems to find the scanner but doesn't recognise the driver for it after trying to scan. Any thoughts? Tobias -- Remember, gravity is not just a good idea. It's the law. And it's not subject to repeal. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: Digitale PGP-Unterschrift Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20080304/f7ff813f/attachment.pgp