Hello I'd like to report an unsupported device. Its name is Canon i-Sensys MF4018. Bus type: USB USB id: 04a9/26b4 This multifunctional belongs to 4010 series and must be identical to MF4010. I tried to use sane-backends-2009-02-19, but 'scanimage -L' said: "No scanners were identified".
$ sane-find-scanner -v -v This is sane-find-scanner from sane-backends 1.1.0-cvs # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. searching for SCSI scanners: checking /dev/scanner... failed to open (Invalid argument) checking /dev/sg0... failed to open (Invalid argument) checking /dev/sg1... failed to open (Invalid argument) checking /dev/sg2... failed to open (Invalid argument) checking /dev/sg3... failed to open (Invalid argument) checking /dev/sg4... failed to open (Invalid argument) checking /dev/sg5... failed to open (Invalid argument) checking /dev/sg6... failed to open (Invalid argument) checking /dev/sg7... failed to open (Invalid argument) checking /dev/sg8... failed to open (Invalid argument) checking /dev/sg9... failed to open (Invalid argument) checking /dev/sga... failed to open (Invalid argument) checking /dev/sgb... failed to open (Invalid argument) checking /dev/sgc... failed to open (Invalid argument) checking /dev/sgd... failed to open (Invalid argument) checking /dev/sge... failed to open (Invalid argument) checking /dev/sgf... failed to open (Invalid argument) checking /dev/sgg... failed to open (Invalid argument) checking /dev/sgh... failed to open (Invalid argument) checking /dev/sgi... failed to open (Invalid argument) checking /dev/sgj... failed to open (Invalid argument) checking /dev/sgk... failed to open (Invalid argument) checking /dev/sgl... failed to open (Invalid argument) checking /dev/sgm... failed to open (Invalid argument) checking /dev/sgn... failed to open (Invalid argument) checking /dev/sgo... failed to open (Invalid argument) checking /dev/sgp... failed to open (Invalid argument) checking /dev/sgq... failed to open (Invalid argument) checking /dev/sgr... failed to open (Invalid argument) checking /dev/sgs... failed to open (Invalid argument) checking /dev/sgt... failed to open (Invalid argument) checking /dev/sgu... failed to open (Invalid argument) checking /dev/sgv... failed to open (Invalid argument) checking /dev/sgw... failed to open (Invalid argument) checking /dev/sgx... failed to open (Invalid argument) checking /dev/sgy... failed to open (Invalid argument) checking /dev/sgz... failed to open (Invalid argument) # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. searching for USB scanners: checking /dev/usb/scanner... failed to open (Invalid argument) checking /dev/usb/scanner0... failed to open (Invalid argument) checking /dev/usb/scanner1... failed to open (Invalid argument) checking /dev/usb/scanner2... failed to open (Invalid argument) checking /dev/usb/scanner3... failed to open (Invalid argument) checking /dev/usb/scanner4... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner5... failed to open (Invalid argument) checking /dev/usb/scanner7... failed to open (Invalid argument) checking /dev/usb/scanner8... failed to open (Invalid argument) checking /dev/usb/scanner9... failed to open (Invalid argument) checking /dev/usb/scanner10... failed to open (Invalid argument) checking /dev/usb/scanner11... failed to open (Invalid argument) checking /dev/usb/scanner12... failed to open (Invalid argument) checking /dev/usb/scanner13... failed to open (Invalid argument) checking /dev/usb/scanner14... failed to open (Invalid argument) checking /dev/usb/scanner15... failed to open (Invalid argument) checking /dev/usbscanner... failed to open (Invalid argument) checking /dev/usbscanner0... failed to open (Invalid argument) checking /dev/usbscanner1... failed to open (Invalid argument) checking /dev/usbscanner2... failed to open (Invalid argument) checking /dev/usbscanner3... failed to open (Invalid argument) checking /dev/usbscanner4... failed to open (Invalid argument) checking /dev/usbscanner5... failed to open (Invalid argument) checking /dev/usbscanner6... failed to open (Invalid argument) checking /dev/usbscanner7... failed to open (Invalid argument) checking /dev/usbscanner8... failed to open (Invalid argument) checking /dev/usbscanner9... failed to open (Invalid argument) checking /dev/usbscanner10... failed to open (Invalid argument) checking /dev/usbscanner11... failed to open (Invalid argument) checking /dev/usbscanner12... failed to open (Invalid argument) checking /dev/usbscanner13... failed to open (Invalid argument) checking /dev/usbscanner14... failed to open (Invalid argument) checking /dev/usbscanner15... failed to open (Invalid argument) trying libusb: <device descriptor of 0x04a9/0x26b4 at 001:005> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04A9 idProduct 0x26B4 bcdDevice 1.00 iManufacturer 1 ((null)) iProduct 2 ((null)) iSerialNumber 3 ((null)) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 () bmAttributes 192 (Self-powered) MaxPower 2 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x01 (out 0x01) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x82 (in 0x02) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 2> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 3 (interrupt) wMaxPacketSize 64 bInterval 11 ms bRefresh 0 bSynchAddress 0 <interface 1> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x04 (out 0x04) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x85 (in 0x05) bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bDeviceClass = 0) checking for GT-6816 ... this is not a GT-6816 (bcdUSB = 0x200) checking for GT-8911 ... this is not a GT-8911 (check 2, bcdUSB = 0x200) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) checking for MA-1015 ... this is not a MA-1015 (bDeviceClass = 0) checking for MA-1509 ... this is not a MA-1509 (bDeviceClass = 0) checking for LM983[1,2,3] ... this is not a LM983x (bcdUSB = 0x200) checking for GL646 ... this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL646_HP ... this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) checking for GL660+GL646 ... this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL84x ... this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) checking for ICM532B ... this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) checking for PV8630/LM9830 ... this is not a PV8630/LM9830 (bcdUSB = 0x200) checking for M011 ... this is not a M011 (bDeviceClass = 0) checking for RTS8822 ... this is not a RTS8822 (bEndpointAddress = 0x1, bmAttributes = 0x2, wMaxPacketSize = 0x200, bInterval = 0x0) checking for rts8858c ... this is not a rts8858c (bcdUSB = 0x200) checking for SQ113 ... this is not a SQ113 (bInterfaceSubClass = 0) checking for HP5550/5590/7650 chipset ... this is not a HP5550/5590/7650 chipset (bDeviceClass = 0) checking for rts8801/rts8891 ... this is not a rts8801/rts8891 (bcdUSB = 0x200) <Couldn't determine the type of the USB chip (result from sane-backends 1.1.0-cvs)> found USB scanner (vendor=0x04a9, product=0x26b4) at libusb:001:005 <device descriptor of 0x1d6b/0x0002 at 001:001> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0002 bcdDevice 2.06 iManufacturer 3 ((null)) iProduct 2 ((null)) iSerialNumber 1 ((null)) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 12 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x1d6b/0x0001 at 004:001> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 ((null)) iProduct 2 ((null)) iSerialNumber 1 ((null)) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 255 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x067b/0x2303 at 003:003> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x067B idProduct 0x2303 bcdDevice 3.00 iManufacturer 1 ((null)) iProduct 2 ((null)) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 128 () MaxPower 100 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 10 bInterval 1 ms bRefresh 0 bSynchAddress 0 <endpoint 1> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <endpoint 2> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03) bmAttributes 2 (bulk) wMaxPacketSize 64 bInterval 0 ms bRefresh 0 bSynchAddress 0 <trying to find out which USB chip is used> checking for GT-6801 ... this is not a GT-6801 (bDeviceClass = 0) checking for GT-6816 ... this is not a GT-6816 (bNumEndpoints = 3) checking for GT-8911 ... this is not a GT-8911 (check 5, bNumEndpoints = 3) checking for MA-1017 ... this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) checking for MA-1015 ... this is not a MA-1015 (bDeviceClass = 0) checking for MA-1509 ... this is not a MA-1509 (bDeviceClass = 0) checking for LM983[1,2,3] ... this is not a LM983x (bEndpointAddress = 0x81, bmAttributes = 0x3, wMaxPacketSize = 0xa, bInterval = 0x1) checking for GL646 ... this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL646_HP ... this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) checking for GL660+GL646 ... this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) checking for GL84x ... this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) checking for ICM532B ... this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) checking for PV8630/LM9830 ... this is not a PV8630/LM9830 (bcdUSB = 0x110) checking for M011 ... this is not a M011 (bDeviceClass = 0) checking for RTS8822 ... this is not a RTS8822 (bEndpointAddress = 0x81, bmAttributes = 0x3, wMaxPacketSize = 0xa, bInterval = 0x1) checking for rts8858c ... this is not a rts8858c (bEndpointAddress = 0x81, bmAttributes = 0x3, wMaxPacketSize = 0xa, bInterval = 0x1) checking for SQ113 ... this is not a SQ113 (bcdUSB = 0x110) checking for HP5550/5590/7650 chipset ... this is not a HP5550/5590/7650 chipset (bDeviceClass = 0) checking for rts8801/rts8891 ... this is not a rts8801/rts8891 (bEndpointAddress = 0x81, bmAttributes = 0x3, wMaxPacketSize = 0xa, bInterval = 0x1) <Couldn't determine the type of the USB chip (result from sane-backends 1.1.0-cvs)> found USB scanner (vendor=0x067b, product=0x2303) at libusb:003:003 <device descriptor of 0x1d6b/0x0001 at 003:001> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 ((null)) iProduct 2 ((null)) iSerialNumber 1 ((null)) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 255 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x0458/0x004c at 002:005> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0458 idProduct 0x004C bcdDevice 1.01 iManufacturer 1 ((null)) iProduct 2 ((null)) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 50 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 bInterfaceSubClass 1 bInterfaceProtocol 1 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 8 bInterval 10 ms bRefresh 0 bSynchAddress 0 <interface 1> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x82 (in 0x02) bmAttributes 3 (interrupt) wMaxPacketSize 8 bInterval 10 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x046d/0xc045 at 002:003> bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046D idProduct 0xC045 bcdDevice 39.20 iManufacturer 1 ((null)) iProduct 2 ((null)) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 160 (Remote Wakeup) MaxPower 98 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 bInterfaceSubClass 1 bInterfaceProtocol 2 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 5 bInterval 10 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x04b4/0x2050 at 002:004> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x04B4 idProduct 0x2050 bcdDevice 0.01 iManufacturer 1 ((null)) iProduct 2 ((null)) iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 100 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 255 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x04cc/0x1122 at 002:002> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04CC idProduct 0x1122 bcdDevice 1.10 iManufacturer 0 () iProduct 0 () iSerialNumber 0 () bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 160 (Remote Wakeup) MaxPower 100 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 255 ms bRefresh 0 bSynchAddress 0 <device descriptor of 0x1d6b/0x0001 at 002:001> bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1D6B idProduct 0x0001 bcdDevice 2.06 iManufacturer 3 ((null)) iProduct 2 ((null)) iSerialNumber 1 ((null)) bNumConfigurations 1 <configuration 0> bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 () bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower 0 mA <interface 0> <altsetting 0> bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint 0> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01) bmAttributes 3 (interrupt) wMaxPacketSize 2 bInterval 255 ms bRefresh 0 bSynchAddress 0 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. done Here is a part of /proc/bus/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04a9 ProdID=26b4 Rev= 1.00 S: Manufacturer=Canon Inc. S: Product=MF4010 S: SerialNumber=SDF760260809Q C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=128ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms