2010/3/27 m. allan noah <kitno455 at gmail.com>: >> try to get a log of the scanner being plugged in and turned on. I want >> to see the firmware upload. >>
Esfw66.bin is really the firmware: it's the main block of data in the init logfile (starting at line 54). The differences are: - the 100 first bytes of the firmware are not sended. - the end of the firmware is not sended too (they are only "ff" values). > > Attached is an image extracted from your log. The first scan was a white area only, so it's hard to split the white calibration and the really scanned area. > Can you write > the letters 'RGB', each in the correct color It's done: The results are available in the archive at http://static.zeropassword.com/tmp/epson_v100_init_and_scan_RGB.tar.lzma It a temporary address; I will set up a very basic website elsewhere. In the archive: - the logs of the scan at 50 dpi and at 300 dpi; - the picture generated by the scanner; - the log of the init. All the logs are filtered by spike4. -- St?phane