Rei Shinozuka wrote: > > I have the V700 scanner and asked the same question. Alesh Slovak of > Avasys (who develops iscan) responded: > > The device has a second TPU mode with the larger area which is > available only through the extended command set and while epkowa > does support this extended command set (hence the suggested > fs-blacklist edit) it unfortunately does not support the device's > second TPU mode. It is likely that the situation > is the same for the epson2 backend. > > > There is a non-open source solution using the V700 scanner 8x10 mode > under Linux: vuescan. I've used it since 2002 and it's a quality > product. Using Vuescan on my Ubuntu system, I've made 8x10 scans of 36 > frames of 35mm film and 12 frames of 120 (digital contact sheets). > Vuescan costs $79.95 with a trial edition to see if it works. > > http://www.hamrick.com/ > > (note I have no financial or other interest in the software or company, > other than being a satisfied customer.) > > -rei > > > On 04/28/2010 02:01 AM, Rikiya wrote: >> Hi, >> >> I'm trying to scan 8x10 inch in TPU mode with Epson v700 (Actually, >> I'm using GT-X970 in japan. The names are different, but maybe >> same hardware). This function is not supported by neither epson >> nor epkowa, as Olaf said below URL. >> >> http://old.nabble.com/Re%3A-Epson-Perfection-V700-p9486669.html >> http://old.nabble.com/Re%3A-Epson-Perfection-V700-p9486669.html >> >> I found a similar problem and solution in another model (Epson v500). >> >> http://old.nabble.com/Re%3A-Limits-on-scan-width-Epson-v500-Linux-Epkowa-p27994429.html >> http://old.nabble.com/Re%3A-Limits-on-scan-width-Epson-v500-Linux-Epkowa-p27994429.html >> >> This solution is modifying iscan source code (It's quite elegant way). >> I applied same method to my situation, but it doesn't work. >> >> Is there any solution to scan 8x10 inch in TPU mode with Epson v700? >> >> Thank you, >> Rikiya >> > > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org > >
I tried vuescan... it works!! Thank you, Rei. But, this software doesn't have command-line operation (like scanimage of SANE). Hopefully I will use CUI scan operation. I read http://old.nabble.com/Epson-Perfection-V700-PHOTO-GT-X900-scan-size-tt28286411.html this thread , and Gernot said: It looks like this is done in epson2-ops.c in function e2_discover_capabilities. There is a block for the GT-X800. Unfortunately, it looks like one might need to do Windows snooping to figure out what might have to be done for the GT-X900. So, is there anything I can do for development? (I have a GT-X970, maybe there is something to do.) -- Rikiya -- View this message in context: http://old.nabble.com/Limits-on-TPU-scan-width-Epson-v700-tp28385082p28401466.html Sent from the SANE - Dev mailing list archive at Nabble.com.