PIXMA MX350 is not yet declared in the Sane pixma backend, so it won't be detected.
Do you have the possibility to get a USB Snoop trace using Snoopypro.exe on windows (I can give you the procedure if you want, this is simple, or you can look at some other messages in the Sane-devel mailing list where I explain this) so that I can figure out how to declare it in the backend ? Nicolas Le lundi 21 juin 2010 ? 23:47 +0200, Guenther Hutzl a ?crit : > Hello! > > I have a Canon PIXMA MX350 Multifunction device and found out that the > scanner in this model is not yet supported by the sane-pixma driver. Is > there anybody out there who could help me getting it to work with my > scanner? > > I am running gentoo linux and I use sane-backends-1.0.21. Could anyone > please tell me what patches I need to make to the code to at least try > if the scanner just works with the existing driver? At the moment the > scanner is not recognized although the printer is detected in the network: > > [pixma] eth0 is IPv4 capable, sending broadcast.. > [pixma] Found scanner at ip address: 192.168.1.88 > [pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added > before, good! > [pixma] Found scanner at ip address: 192.168.1.88 > [pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added > before, good! > [pixma] Found scanner at ip address: 192.168.1.88 > [pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added > before, good! > [pixma] Found scanner at ip address: 192.168.1.88 > [pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added > before, good! > [pixma] Found scanner at ip address: 192.168.1.88 > [pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added > before, good! > [pixma] pixma_find_scanners() found 0 devices > > I am running linux only so I cannot make usb traces but I have a vmware > player virtual machine running with Windows XP if that helps in creating > usb traces. I also have access to a macbook if one can do usb traces > using a mac. > > Any help is appreciated. Thanks in advance, > > Guenther. > > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org