Looks more like a camera than a scanner. You might try the gphoto guys and see if it looks familiar to them.
allan On Thu, Sep 16, 2010 at 8:47 AM, B. Ferdinand <b.ferdi at gmx.net> wrote: > Type: reflecta X?-Scan > > Device: > > Image sensor : CMOS > > Colour depth : 24 bit > > Resolution : 5 Mp = 1800 ppi > > Scan range : max. 24,3 x 36,5 mm > > Contrast : 3.0 Dmax > > Connector : USB2.0 (comp. with USB1.1) > > List output - # sane-find-scanner -v -v > > This is sane-find-scanner from sane-backends 1.0.20 > > # sane-find-scanner will now attempt to detect your scanner. If the > > # result is different from what you expected, first make sure your > > # scanner is powered up and properly connected to your computer. > > searching for SCSI scanners: > > checking /dev/scanner... failed to open (Invalid argument) > > checking /dev/sg0... failed to open (Invalid argument) > > checking /dev/sg1... failed to open (Invalid argument) > > checking /dev/sg2... failed to open (Invalid argument) > > checking /dev/sg3... failed to open (Invalid argument) > > checking /dev/sg4... failed to open (Invalid argument) > > checking /dev/sg5... failed to open (Invalid argument) > > checking /dev/sg6... failed to open (Invalid argument) > > checking /dev/sg7... failed to open (Invalid argument) > > checking /dev/sg8... failed to open (Invalid argument) > > checking /dev/sg9... failed to open (Invalid argument) > > checking /dev/sga... failed to open (Invalid argument) > > checking /dev/sgb... failed to open (Invalid argument) > > checking /dev/sgc... failed to open (Invalid argument) > > checking /dev/sgd... failed to open (Invalid argument) > > checking /dev/sge... failed to open (Invalid argument) > > checking /dev/sgf... failed to open (Invalid argument) > > checking /dev/sgg... failed to open (Invalid argument) > > checking /dev/sgh... failed to open (Invalid argument) > > checking /dev/sgi... failed to open (Invalid argument) > > checking /dev/sgj... failed to open (Invalid argument) > > checking /dev/sgk... failed to open (Invalid argument) > > checking /dev/sgl... failed to open (Invalid argument) > > checking /dev/sgm... failed to open (Invalid argument) > > checking /dev/sgn... failed to open (Invalid argument) > > checking /dev/sgo... failed to open (Invalid argument) > > checking /dev/sgp... failed to open (Invalid argument) > > checking /dev/sgq... failed to open (Invalid argument) > > checking /dev/sgr... failed to open (Invalid argument) > > checking /dev/sgs... failed to open (Invalid argument) > > checking /dev/sgt... failed to open (Invalid argument) > > checking /dev/sgu... failed to open (Invalid argument) > > checking /dev/sgv... failed to open (Invalid argument) > > checking /dev/sgw... failed to open (Invalid argument) > > checking /dev/sgx... failed to open (Invalid argument) > > checking /dev/sgy... failed to open (Invalid argument) > > checking /dev/sgz... failed to open (Invalid argument) > > # No SCSI scanners found. If you expected something different, make sure > that > > # you have loaded a kernel SCSI driver for your SCSI adapter. > > searching for USB scanners: > > checking /dev/usb/scanner... failed to open (Invalid argument) > > checking /dev/usb/scanner0... failed to open (Invalid argument) > > checking /dev/usb/scanner1... failed to open (Invalid argument) > > checking /dev/usb/scanner2... failed to open (Invalid argument) > > checking /dev/usb/scanner3... failed to open (Invalid argument) > > checking /dev/usb/scanner4... failed to open (Invalid argument) > > checking /dev/usb/scanner5... failed to open (Invalid argument) > > checking /dev/usb/scanner5... failed to open (Invalid argument) > > checking /dev/usb/scanner7... failed to open (Invalid argument) > > checking /dev/usb/scanner8... failed to open (Invalid argument) > > checking /dev/usb/scanner9... failed to open (Invalid argument) > > checking /dev/usb/scanner10... failed to open (Invalid argument) > > checking /dev/usb/scanner11... failed to open (Invalid argument) > > checking /dev/usb/scanner12... failed to open (Invalid argument) > > checking /dev/usb/scanner13... failed to open (Invalid argument) > > checking /dev/usb/scanner14... failed to open (Invalid argument) > > checking /dev/usb/scanner15... failed to open (Invalid argument) > > checking /dev/usbscanner... failed to open (Invalid argument) > > checking /dev/usbscanner0... failed to open (Invalid argument) > > checking /dev/usbscanner1... failed to open (Invalid argument) > > checking /dev/usbscanner2... failed to open (Invalid argument) > > checking /dev/usbscanner3... failed to open (Invalid argument) > > checking /dev/usbscanner4... failed to open (Invalid argument) > > checking /dev/usbscanner5... failed to open (Invalid argument) > > checking /dev/usbscanner6... failed to open (Invalid argument) > > checking /dev/usbscanner7... failed to open (Invalid argument) > > checking /dev/usbscanner8... failed to open (Invalid argument) > > checking /dev/usbscanner9... failed to open (Invalid argument) > > checking /dev/usbscanner10... failed to open (Invalid argument) > > checking /dev/usbscanner11... failed to open (Invalid argument) > > checking /dev/usbscanner12... failed to open (Invalid argument) > > checking /dev/usbscanner13... failed to open (Invalid argument) > > checking /dev/usbscanner14... failed to open (Invalid argument) > > checking /dev/usbscanner15... failed to open (Invalid argument) > > trying libusb: > > <device descriptor of 0x1d6b/0x0002 at 001:001 (Linux 2.6.31.12-0.2-desktop > ehci_hcd EHCI Host Controller)> > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 9 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x1D6B > > idProduct 0x0002 > > bcdDevice 2.06 > > iManufacturer 3 (Linux 2.6.31.12-0.2-desktop ehci_hcd) > > iProduct 2 (EHCI Host Controller) > > iSerialNumber 1 (0000:00:02.1) > > bNumConfigurations 1 > > <configuration 0> > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 () > > bmAttributes 224 (Self-poweredRemote Wakeup) > > MaxPower 0 mA > > <interface 0> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 (in 0x01) > > bmAttributes 3 (interrupt) > > wMaxPacketSize 4 > > bInterval 12 ms > > bRefresh 0 > > bSynchAddress 0 > > <device descriptor of 0x04e8/0x342a at 001:004 (Samsung Electronics Co., > Ltd. CLX-3170 Series)> > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 0 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x04E8 > > idProduct 0x342A > > bcdDevice 1.00 > > iManufacturer 1 (Samsung Electronics Co., Ltd.) > > iProduct 2 (CLX-3170 Series) > > iSerialNumber 3 (14AUBxxxxxxxxxx) > > bNumConfigurations 1 > > <configuration 0> > > bLength 9 > > bDescriptorType 2 > > wTotalLength 55 > > bNumInterfaces 2 > > bConfigurationValue 1 > > iConfiguration 0 () > > bmAttributes 192 (Self-powered) > > MaxPower 2 mA > > <interface 0> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 2 > > bInterfaceClass 255 > > bInterfaceSubClass 255 > > bInterfaceProtocol 255 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x03 (out 0x03) > > bmAttributes 2 (bulk) > > wMaxPacketSize 512 > > bInterval 10 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 1> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x84 (in 0x04) > > bmAttributes 2 (bulk) > > wMaxPacketSize 512 > > bInterval 10 ms > > bRefresh 0 > > bSynchAddress 0 > > <interface 1> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 1 > > bAlternateSetting 0 > > bNumEndpoints 2 > > bInterfaceClass 7 > > bInterfaceSubClass 1 > > bInterfaceProtocol 2 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x01 (out 0x01) > > bmAttributes 2 (bulk) > > wMaxPacketSize 512 > > bInterval 10 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 1> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x82 (in 0x02) > > bmAttributes 2 (bulk) > > wMaxPacketSize 512 > > bInterval 10 ms > > bRefresh 0 > > bSynchAddress 0 > > <trying to find out which USB chip is used> > > checking for GT-6801 ... > > this is not a GT-6801 (bDeviceClass = 0) > > checking for GT-6816 ... > > this is not a GT-6816 (bcdUSB = 0x200) > > checking for GT-8911 ... > > this is not a GT-8911 (check 2, bcdUSB = 0x200) > > checking for MA-1017 ... > > this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for MA-1015 ... > > this is not a MA-1015 (bDeviceClass = 0) > > checking for MA-1509 ... > > this is not a MA-1509 (bDeviceClass = 0) > > checking for LM983[1,2,3] ... > > this is not a LM983x (bcdUSB = 0x200) > > checking for GL646 ... > > this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL646_HP ... > > this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL660+GL646 ... > > this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL84x ... > > this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for ICM532B ... > > this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) > > checking for PV8630/LM9830 ... > > this is not a PV8630/LM9830 (bcdUSB = 0x200) > > checking for M011 ... > > this is not a M011 (bDeviceClass = 0) > > checking for RTS8822 ... > > this is not a RTS8822 (bNumEndpoints = 2) > > checking for rts8858c ... > > this is not a rts8858c (bcdUSB = 0x200) > > checking for SQ113 ... > > this is not a SQ113 (bNumEndpoints = 2) > > checking for HP5550/5590/7650 chipset ... > > this is not a HP5550/5590/7650 chipset (bDeviceClass = 0) > > checking for rts8801/rts8891 ... > > this is not a rts8801/rts8891 (bcdUSB = 0x200) > > <Couldn't determine the type of the USB chip (result from sane-backends > 1.0.20)> > > found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], > product=0x342a [CLX-3170 Series]) at libusb:001:004 > > <device descriptor of 0x05e3/0x0710 at 001:005 (USB Storage)> > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 0 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x05E3 > > idProduct 0x0710 > > bcdDevice 145.44 > > iManufacturer 0 () > > iProduct 1 (USB Storage) > > iSerialNumber 2 (000000009xxx) > > bNumConfigurations 1 > > <configuration 0> > > bLength 9 > > bDescriptorType 2 > > wTotalLength 32 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 () > > bmAttributes 128 () > > MaxPower 500 mA > > <interface 0> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 2 > > bInterfaceClass 8 > > bInterfaceSubClass 6 > > bInterfaceProtocol 80 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 (in 0x01) > > bmAttributes 2 (bulk) > > wMaxPacketSize 512 > > bInterval 0 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 1> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x02 (out 0x02) > > bmAttributes 2 (bulk) > > wMaxPacketSize 512 > > bInterval 0 ms > > bRefresh 0 > > bSynchAddress 0 > > <device descriptor of 0x05a9/0x1550 at 001:061 (FW-07.07.25 USB Camera)> > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 0 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x05A9 > > idProduct 0x1550 > > bcdDevice 1.00 > > iManufacturer 1 (FW-07.07.25) > > iProduct 2 (USB Camera) > > iSerialNumber 0 () > > bNumConfigurations 1 > > <configuration 0> > > bLength 9 > > bDescriptorType 2 > > wTotalLength 55 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 () > > bmAttributes 128 () > > MaxPower 500 mA > > <interface 0> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 2 > > bInterfaceClass 255 > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x83 (in 0x03) > > bmAttributes 3 (interrupt) > > wMaxPacketSize 4 > > bInterval 10 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 1> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 (in 0x01) > > bmAttributes 1 (isochronous) > > wMaxPacketSize 0 > > bInterval 1 ms > > bRefresh 0 > > bSynchAddress 0 > > <altsetting 1> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 1 > > bNumEndpoints 2 > > bInterfaceClass 255 > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x83 (in 0x03) > > bmAttributes 3 (interrupt) > > wMaxPacketSize 4 > > bInterval 10 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 1> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 (in 0x01) > > bmAttributes 1 (isochronous) > > wMaxPacketSize 5116 > > bInterval 1 ms > > bRefresh 0 > > bSynchAddress 0 > > <trying to find out which USB chip is used> > > checking for GT-6801 ... > > this is not a GT-6801 (bDeviceClass = 0) > > checking for GT-6816 ... > > this is not a GT-6816 (bcdUSB = 0x200) > > checking for GT-8911 ... > > this is not a GT-8911 (check 2, bcdUSB = 0x200) > > checking for MA-1017 ... > > this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for MA-1015 ... > > this is not a MA-1015 (bDeviceClass = 0) > > checking for MA-1509 ... > > this is not a MA-1509 (bDeviceClass = 0) > > checking for LM983[1,2,3] ... > > this is not a LM983x (bcdUSB = 0x200) > > checking for GL646 ... > > this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL646_HP ... > > this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL660+GL646 ... > > this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL84x ... > > this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for ICM532B ... > > this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) > > checking for PV8630/LM9830 ... > > this is not a PV8630/LM9830 (bcdUSB = 0x200) > > checking for M011 ... > > this is not a M011 (bDeviceClass = 0) > > checking for RTS8822 ... > > this is not a RTS8822 (bNumEndpoints = 2) > > checking for rts8858c ... > > this is not a rts8858c (bcdUSB = 0x200) > > checking for SQ113 ... > > this is not a SQ113 (bInterfaceSubClass = 0) > > checking for HP5550/5590/7650 chipset ... > > this is not a HP5550/5590/7650 chipset (bDeviceClass = 0) > > checking for rts8801/rts8891 ... > > this is not a rts8801/rts8891 (bcdUSB = 0x200) > > <Couldn't determine the type of the USB chip (result from sane-backends > 1.0.20)> > > found USB scanner (vendor=0x05a9 [FW-07.07.25], product=0x1550 [USB Camera]) > at libusb:001:061 > > <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.31.12-0.2-desktop > ohci_hcd OHCI Host Controller)> > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.10 > > bDeviceClass 9 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x1D6B > > idProduct 0x0001 > > bcdDevice 2.06 > > iManufacturer 3 (Linux 2.6.31.12-0.2-desktop ohci_hcd) > > iProduct 2 (OHCI Host Controller) > > iSerialNumber 1 (0000:00:02.0) > > bNumConfigurations 1 > > <configuration 0> > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 () > > bmAttributes 224 (Self-poweredRemote Wakeup) > > MaxPower 0 mA > > <interface 0> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 (in 0x01) > > bmAttributes 3 (interrupt) > > wMaxPacketSize 2 > > bInterval 255 ms > > bRefresh 0 > > bSynchAddress 0 > > <device descriptor of 0x045e/0x00ca at 002:002> > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 0 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x045E > > idProduct 0x00CA > > bcdDevice 1.00 > > iManufacturer 1 () > > iProduct 2 () > > iSerialNumber 3 () > > bNumConfigurations 1 > > <configuration 0> > > bLength 9 > > bDescriptorType 2 > > wTotalLength 32 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 () > > bmAttributes 128 () > > MaxPower 260 mA > > <interface 0> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 2 > > bInterfaceClass 255 > > bInterfaceSubClass 255 > > bInterfaceProtocol 255 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 (in 0x01) > > bmAttributes 3 (interrupt) > > wMaxPacketSize 64 > > bInterval 8 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 1> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x82 (in 0x02) > > bmAttributes 2 (bulk) > > wMaxPacketSize 64 > > bInterval 0 ms > > bRefresh 0 > > bSynchAddress 0 > > <trying to find out which USB chip is used> > > checking for GT-6801 ... > > this is not a GT-6801 (bDeviceClass = 0) > > checking for GT-6816 ... > > this is not a GT-6816 (bcdUSB = 0x200) > > checking for GT-8911 ... > > this is not a GT-8911 (check 2, bcdUSB = 0x200) > > checking for MA-1017 ... > > this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for MA-1015 ... > > this is not a MA-1015 (bDeviceClass = 0) > > checking for MA-1509 ... > > this is not a MA-1509 (bDeviceClass = 0) > > checking for LM983[1,2,3] ... > > this is not a LM983x (bcdUSB = 0x200) > > checking for GL646 ... > > this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL646_HP ... > > this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL660+GL646 ... > > this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL84x ... > > this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for ICM532B ... > > this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) > > checking for PV8630/LM9830 ... > > this is not a PV8630/LM9830 (bcdUSB = 0x200) > > checking for M011 ... > > this is not a M011 (bDeviceClass = 0) > > checking for RTS8822 ... > > this is not a RTS8822 (bNumEndpoints = 2) > > checking for rts8858c ... > > this is not a rts8858c (bcdUSB = 0x200) > > checking for SQ113 ... > > this is not a SQ113 (bNumEndpoints = 2) > > checking for HP5550/5590/7650 chipset ... > > this is not a HP5550/5590/7650 chipset (bDeviceClass = 0) > > checking for rts8801/rts8891 ... > > this is not a rts8801/rts8891 (bcdUSB = 0x200) > > <Couldn't determine the type of the USB chip (result from sane-backends > 1.0.20)> > > found USB scanner (vendor=0x045e, product=0x00ca) at libusb:002:002 > > <device descriptor of 0x0c4b/0x0100 at 002:003> > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.00 > > bDeviceClass 0 > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 16 > > idVendor 0x0C4B > > idProduct 0x0100 > > bcdDevice 1.00 > > iManufacturer 0 () > > iProduct 0 () > > iSerialNumber 0 () > > bNumConfigurations 1 > > <configuration 0> > > bLength 9 > > bDescriptorType 2 > > wTotalLength 39 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 () > > bmAttributes 160 (Remote Wakeup) > > MaxPower 96 mA > > <interface 0> > > <altsetting 0> > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 3 > > bInterfaceClass 255 > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 () > > <endpoint 0> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 (in 0x01) > > bmAttributes 3 (interrupt) > > wMaxPacketSize 16 > > bInterval 5 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 1> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x82 (in 0x02) > > bmAttributes 2 (bulk) > > wMaxPacketSize 64 > > bInterval 1 ms > > bRefresh 0 > > bSynchAddress 0 > > <endpoint 2> > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x02 (out 0x02) > > bmAttributes 2 (bulk) > > wMaxPacketSize 64 > > bInterval 1 ms > > bRefresh 0 > > bSynchAddress 0 > > <trying to find out which USB chip is used> > > checking for GT-6801 ... > > this is not a GT-6801 (bDeviceClass = 0) > > checking for GT-6816 ... > > this is not a GT-6816 (bcdUSB = 0x100) > > checking for GT-8911 ... > > this is not a GT-8911 (check 2, bcdUSB = 0x100) > > checking for MA-1017 ... > > this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for MA-1015 ... > > this is not a MA-1015 (bDeviceClass = 0) > > checking for MA-1509 ... > > this is not a MA-1509 (bDeviceClass = 0) > > checking for LM983[1,2,3] ... > > this is not a LM983x (bEndpointAddress = 0x81, bmAttributes = 0x3, > wMaxPacketSize = 0x10, bInterval = 0x5) > > checking for GL646 ... > > this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL646_HP ... > > this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL660+GL646 ... > > this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for GL84x ... > > this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) > > checking for ICM532B ... > > this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) > > checking for PV8630/LM9830 ... > > this is not a PV8630/LM9830 (bEndpointAddress = 0x81, bmAttributes = 0x3, > wMaxPacketSize = 0x10, bInterval = 0x5) > > checking for M011 ... > > this is not a M011 (bDeviceClass = 0) > > checking for RTS8822 ... > > this is not a RTS8822 (bcdUSB = 0x100) > > checking for rts8858c ... > > this is not a rts8858c (bcdUSB = 0x100) > > checking for SQ113 ... > > this is not a SQ113 (bcdUSB = 0x100) > > checking for HP5550/5590/7650 chipset ... > > this is not a HP5550/5590/7650 chipset (bDeviceClass = 0) > > checking for rts8801/rts8891 ... > > this is not a rts8801/rts8891 (bcdUSB = 0x100) > > <Couldn't determine the type of the USB chip (result from sane-backends > 1.0.20)> > > found USB scanner (vendor=0x0c4b, product=0x0100) at libusb:002:003 > > # Your USB scanner was (probably) detected. It may or may not be supported > by > > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary ports > > # can't be detected by this program. > > done > > best regards > > B. Ferdinand > > ------------------------- > > It is prohibited to publish my email address. > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > ? ? ? ? ? ? to sane-devel-request at lists.alioth.debian.org > -- "The truth is an offense, but not a sin"