Le Sunday 12 December 2010 19:30:00 Igor Zobin, vous avez ?crit : > Hello, > > I use a HP Scanjet 2400, which is recognized by the lsusb as: "ID > 03f0:0a01 Hewlett-Packard ScanJet 2400c". When starting xsane from the > terminal, it told me to email you about how well the scanner works. > > The scanner works (b/w only) in Fedora 12 and 13 without any problems, > Trisquel 4.0 however has some rights issues and xsane sees the scanner > only if I start it as root. I would appreciate some advice from your > side in that. How do I make xsane see the scanner in normal-user mode? > I'm using Trisquel 4.0 tarantis. > > When I try to scan in colour, I get a picture where all the colours are > out of place. All three components R, G and B are there, but they don't > match up on the picture which makes it look very funny. > > Another issue I have with the scanner: it only works in 300 dpi. Every > other resolution will result in one portion of the picture becoming black. > > Other than that, as long I scan in b/w and with 300dpi, it works > perfect. The picture is of higher quality (higher contrast, very deep > black) than with the original Windows driver. If the paper I'm scanning > is thin enough, I am able to read what's written on the OTHER side of > it, that's how good it is. > > > Greets, > Igor.
Hello, the current status for the HP2400 is only experimental support. It is working for a few scan modes. For this model, someone with the hardware has to complete the work. Regards, Stef