Great, it's working fine (see the test6.tar.gz at http://dl.free.fr/bGEgn9yFu )
I'll make series of tests at other resolutions. Thanx. Le 04/01/2011 17:53, m. allan noah a ?crit : > ok- let us try again, slightly updated file. > > allan > > On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste) > <liste at alixen.fr> wrote: >> Hi, >> >> thank you for the new version. >> >> The scan is not exactly what it should be (see the file test5.tar.gz). The >> scanned image is not at the right position. Probably a shift problem. >> >> Note that for all the tests I've done it was a A4 paper and the Canon >> DR-5060-F is a A3 scanner. >> >> the file test5.tar.gz can be downloaded here : http://dl.free.fr/baKWwnrcy >> >> Christophe. >> >> Le 04/01/2011 16:23, m. allan noah a ?crit : >>> >>> here is a new version of two files. use these to replace your existing >>> copies, and recompile. This should contain all of your current fixes, >>> and it should (hopefully) produce proper grayscale scans. >>> >>> If you can test this also in lineart mode, it might need the same >>> width fix as grayscale... >>> >>> allan >>> >>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste) >>> <liste at alixen.fr> wrote: >>>> >>>> Thank you for the information, waiting for your fix. >>>> >>>> Christophe. >>>> >>>> Le 03/01/2011 20:03, m. allan noah a ?crit : >>>>> >>>>> It appears that the corrupt image is because the scanner sends us 1728 >>>>> pixels per line, but we asked for only 1700. Likely this means that >>>>> the scanner is limited to image widths which are a multiple of 32 >>>>> pixels. I will see if I can come up with a fix. >>>>> >>>>> allan >>>>> >>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com> >>>>> wrote: >>>>>> >>>>>> jpg destroys too much image information. Any chance to can compress >>>>>> the pnm instead, and send that to me directly? >>>>>> >>>>>> allan >>>>>> >>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste) >>>>>> <liste at alixen.fr> wrote: >>>>>>> >>>>>>> OK, >>>>>>> >>>>>>> my A4 page (basically 0.5 millimeter squares) has been processed >>>>>>> >>>>>>> you can view the result here >>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not really the >>>>>>> expected result ;) >>>>>>> >>>>>>> You'll find the compressed test3.log attached to this message. >>>>>>> >>>>>>> Do you need other informations for ssm_df() and ssm_do() debugging ? >>>>>>> >>>>>>> Christophe. >>>>>>> >>>>>>> Le 03/01/2011 17:45, m. allan noah a ?crit : >>>>>>>> >>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would be nice >>>>>>>> to get those two commands working for your machine (if they are >>>>>>>> supported by the hardware), but they are not required for proper >>>>>>>> functioning. >>>>>>>> >>>>>>>> allan >>>>>>>> >>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste) >>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>> >>>>>>>>> Here is the new test2.log ;) >>>>>>>>> >>>>>>>>> Christophe. >>>>>>>>> >>>>>>>>> Le 03/01/2011 17:31, m. allan noah a ?crit : >>>>>>>>>> >>>>>>>>>> Excellent. set_window is now accepted by the scanner, but it does >>>>>>>>>> not >>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273, and >>>>>>>>>> comment out the call to ssm_do(). Then try again with test2 :) >>>>>>>>>> >>>>>>>>>> allan >>>>>>>>>> >>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste) >>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>> >>>>>>>>>>> Hi, >>>>>>>>>>> >>>>>>>>>>> change, recompile and test done. >>>>>>>>>>> >>>>>>>>>>> The test1pnm file is empty. >>>>>>>>>>> >>>>>>>>>>> The compressed test1.log is attached to this message. >>>>>>>>>>> >>>>>>>>>>> Christophe. >>>>>>>>>>> >>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a ?crit : >>>>>>>>>>>> >>>>>>>>>>>> ok- can you make some changes, recompile, and test? >>>>>>>>>>>> >>>>>>>>>>>> canon_dr.c in function set_window, around line 3615 comment out >>>>>>>>>>>> these >>>>>>>>>>>> lines: >>>>>>>>>>>> >>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128); >>>>>>>>>>>> set_WD_threshold (desc1, s->threshold); >>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128); >>>>>>>>>>>> >>>>>>>>>>>> Then compile, copy the library, and scan again, using this >>>>>>>>>>>> command: >>>>>>>>>>>> >>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray >>>>>>>>>>>>> >>>>>>>>>>>>> test1pnm 2>test1.log >>>>>>>>>>>> >>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress the >>>>>>>>>>>> log >>>>>>>>>>>> and send it to me. >>>>>>>>>>>> >>>>>>>>>>>> allan >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan >>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Yes- I can see some set window data in it, though I am not sure >>>>>>>>>>>>> it >>>>>>>>>>>>> is >>>>>>>>>>>>> complete. This sniffer program seems to miss some of the data. I >>>>>>>>>>>>> will >>>>>>>>>>>>> look some more today. >>>>>>>>>>>>> >>>>>>>>>>>>> allan >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste) >>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>> >>>>>>>>>>>>>> have you checked the log ? Is it helpful ? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a ?crit : >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thank you. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Note that I'll be away until next monday. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a ?crit : >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thanks. I'll look at it tonight. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste) >>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached to this >>>>>>>>>>>>>>>>> message. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> the sniffer utility: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a low-resolution >>>>>>>>>>>>>>>>>> black >>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>> white >>>>>>>>>>>>>>>>>> scan. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I rarely >>>>>>>>>>>>>>>>>> use >>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>> program. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste) >>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows >>>>>>>>>>>>>>>>>>> machine. >>>>>>>>>>>>>>>>>>> Do >>>>>>>>>>>>>>>>>>> you have >>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in the set >>>>>>>>>>>>>>>>>>>> window >>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this machine, >>>>>>>>>>>>>>>>>>>> so >>>>>>>>>>>>>>>>>>>> we >>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and >>>>>>>>>>>>>>>>>>>> capture a >>>>>>>>>>>>>>>>>>>> log >>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on windows? >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan >>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting" >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10 >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>> library for scanners >>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns : >>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your >>>>>>>>>>>>>>>>>>>>>>>> scanner. >>>>>>>>>>>>>>>>>>>>>>>> If the >>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected, first >>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected to >>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>> computer. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not >>>>>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>>>>>>>>>> supported by >>>>>>>>>>>>>>>>>>>>>>>> SANE. >>>>>>>>>>>>>>>>>>>>>>>> Try >>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected something >>>>>>>>>>>>>>>>>>>>>>>> different, >>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host >>>>>>>>>>>>>>>>>>>>>>>> controller >>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>>>> setup >>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for >>>>>>>>>>>>>>>>>>>>>>>> details. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or >>>>>>>>>>>>>>>>>>>>>>>> other >>>>>>>>>>>>>>>>>>>>>>>> proprietary >>>>>>>>>>>>>>>>>>>>>>>> ports >>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner >>>>>>>>>>>>>>>>>>>>>>>> wasn't >>>>>>>>>>>>>>>>>>>>>>>> recognized >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> thanks to this message : >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html >>>>>>>>>>>>>>>>>>>>>>>> , >>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line >>>>>>>>>>>>>>>>>>>>>>>> 1203. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){ >>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0; >>>>>>>>>>>>>>>>>>>>>>>> } >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of >>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la >>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns : >>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F >>>>>>>>>>>>>>>>>>>>>>>> scanner >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work : >>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30. >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from >>>>>>>>>>>>>>>>>>>>>>>> sane-backends >>>>>>>>>>>>>>>>>>>>>>>> 1.0.21 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached, >>>>>>>>>>>>>>>>>>>>>>>> attaching >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file >>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON >>>>>>>>>>>>>>>>>>>>>>>> DR' >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2' >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer >>>>>>>>>>>>>>>>>>>>>>>> size >>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00 >>>>>>>>>>>>>>>>>>>>>>>> ....0. >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f >>>>>>>>>>>>>>>>>>>>>>>> 4e >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> ........CANON >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>> 011020010607 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F >>>>>>>>>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>>>>>>>>> 0110 >>>>>>>>>>>>>>>>>>>>>>>> at >>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 >>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c >>>>>>>>>>>>>>>>>>>>>>>> 01 >>>>>>>>>>>>>>>>>>>>>>>> 2c >>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>> c8 >>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,.. >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee >>>>>>>>>>>>>>>>>>>>>>>> 0e >>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>> .d............ >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' >>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' >>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' >>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' >>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list: >>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe >>>>>>>>>>>>>>>>>>>>>>>> your_password" >>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Christophe Largeau >>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Christophe Largeau >>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Christophe Largeau >>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> "The truth is an offense, but not a sin" >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> Christophe Largeau >>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>> >>> >>> >>> >> >> >> -- >> Christophe Largeau >> Alixen 20 rue Jean Rostand 91 400 Orsay >> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >> > > > -- Christophe Largeau Alixen 20 rue Jean Rostand 91 400 Orsay Tel : 01 60 19 72 31, Fax : 01 69 41 78 54