Hi again, Am 11.11.2011 17:46, schrieb Florian Litzinger: > Hello, > > it's working like a charm now.
good to hear! > Thank you for this great piece of software! If you have any suggestions don't hesitate. > Best Regards > Florian > > > Am 11.11.2011 11:25, schrieb Wilhelm: >> Am 11.11.2011 11:02, schrieb Florian Litzinger: >>> Hello, >>> >>> I've attached the log file. >> >> ok, looks fine. >> >> The scanner is recognized an several options and buttons are found, e.g. >> these >> >> /usr/local/bin/scanbd: found active option[23] button-copy (type: 0) for >> device rts8891:libusb:/dev/usb:/dev/ugen4.2 >> /usr/local/bin/scanbd: found active option[24] button-mail (type: 0) for >> device rts8891:libusb:/dev/usb:/dev/ugen4.2 >> /usr/local/bin/scanbd: found active option[25] button-image-copy (type: >> 0) for device rts8891:libusb:/dev/usb:/dev/ugen4.2 >> /usr/local/bin/scanbd: found active option[26] button-www (type: 0) for >> device rts8891:libusb:/dev/usb:/dev/ugen4.2 >> /usr/local/bin/scanbd: found active option[27] button-scan (type: 0) for >> device rts8891:libusb:/dev/usb:/dev/ugen4.2 >> >> now you can define actions for these options, e.g. >> >> action copy { >> filter = "^button-copy$" >> string-trigger { >> from-value = "" >> to-value = "^copy.*" >> } >> desc = "Copy to printer" >> # script must be an absolute pathname to the action script without >> arguments >> script = "/usr/local/etc/scanbd/test.script" >> } >> >> and then watch if you see any value changes when you press the scanner >> button. If that's ok you can define scripts to implement the actions. >> >>> >>> Thanks! >>> >>> Florian >>> >>> Am 11.11.2011 10:45, schrieb Wilhelm: >>>> Am 11.11.2011 10:16, schrieb Florian Litzinger: >>>>> Hello, >>>>> >>>>> I'm trying to use the scanner button daemon on a FreeBSD 9 server. I >>>>> configured the program according to the information provided in the >>>>> INSTALL file, however, when trying to start the daemon using >>>>> /usr/local/bin/scanbd -c /usr/local/etc/scanbd/scanbd.conf >>>>> the following gets printed on stdout >>>>> /usr/local/bin/scanbd: debug on: level: 7 >>>>> /usr/local/bin/scanbd: daemonize >>>>> and then nothing more happens. ps also doesn't show any processes >>>>> connected to scanbd (or saned, for that matter). >>>> >>>> Please start it in the foreground (-df) and post the output: >>>> >>>> /usr/local/bin/scanbd -df -c /usr/local/etc/scanbd/scanbd.conf >>>> >>>>> The daemon is supposed to run under the saned user account, which >>>>> apparently has sufficent rights to use the scanner device, as >>>>> scanimage >>>>> -L does list the scanner (it's a HP 4470c). >>>>> Could you give me any hints on how to proceed and debug this issue? I >>>>> also can't seem to find the log files mentioned in scanbd.conf - are >>>>> these messages supposed to appear in the syslog? >>>>> >>>>> Thank you very much. >>>>> >>>>> Best Regards >>>>> Florian >>>> >>>> >> >> -- Wilhelm