My Canoscan 5600F don't work (sorry for my english) This is some informations from terminal:
:~$ scanimage -V scanimage (sane-backends) 1.0.23git; backend version 1.0.23 :~$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04a9 [Canon], product=0x1906 [CanoScan], chip=GL847) at libusb:001:008 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. :~$ sudo scanimage -L device `genesys:libusb:001:008' is a Canon 5600F flatbed scanner :~$ scanimage -T [genesys] WARNING: Your scanner is not fully supported or at least [genesys] had only limited testing. Please be careful and [genesys] report any failure/success to [genesys] sane-devel at lists.alioth.debian.org. Please provide as many [genesys] details as possible, e.g. the exact name of your [genesys] scanner and what does (not) work. when i try to acquire images from xsane the program say that there is a problem of 0/1 Thats all. Fabio
