Hi Rolf, here the dump with the higher Debug-Levels. I interrupt after pressing the "COLOR" Scan-Button and the second timout.
regards Matthias Width of scan-area. -y auto|0..297.011mm [297.011] Height of scan-area. Buttons: --button-update Update button state [sanei_usb] sanei_usb_read_int: trying to read 64 bytes [sanei_usb] sanei_usb_read_int: wanted 64 bytes, got 32 bytes [sanei_usb] 000 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 ................ [sanei_usb] 010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [pixma] INTR T=1.432 len=32 [pixma] 00000000:00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [pixma] 00000010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [pixma] [pixma] Sending time: '13/02/05 23:10' [sanei_usb] sanei_usb_write_bulk: trying to write 36 bytes [sanei_usb] 000 EB 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14 ................ [sanei_usb] 010 31 33 2F 30 32 2F 30 35 20 32 33 3A 31 30 00 00 13/02/05 23:10.. [sanei_usb] 020 00 00 00 57 ...W [sanei_usb] sanei_usb_write_bulk: wanted 36 bytes, wrote 36 bytes [pixma] OUT T=1.433 len=36 [pixma] 00000000:eb 80 00 00 00 00 00 00 00 00 00 00 00 00 00 14 [pixma] 00000010:31 33 2f 30 32 2f 30 35 20 32 33 3a 31 30 00 00 [pixma] 00000020:00 00 00 57 [pixma] [sanei_usb] sanei_usb_read_bulk: trying to read 8 bytes [sanei_usb] sanei_usb_read_bulk: read failed: Resource temporarily unavailable [pixma] IN T=21.436 len=-9 [pixma] ERROR: ETIMEDOUT [pixma] [pixma] No response yet. Timed out in 8 sec. [sanei_usb] sanei_usb_read_bulk: trying to read 8 bytes ^C 2013/2/5 Rolf Bensch <rolf at bensch-online.de> > Hi Matthias, > > Sorry for my last email relating to USB and LAN. I mixed the emails up > in my daily digest. Please set me to cc if you send a response to the list. > > Anyway, it seems that your scanner answers the USB interrupt request and > the post process data handling sticks in setting your scanner's clock. > > So I need the debug info with 'export SANE_DEBUG_PIXMA=21' and > 'export SANE_DEBUG_SANEI_USB=255' to fix this issue. > > By now I'm only interested in the lines between "Buttons:" and "Extras:". > > Cheers, > Rolf > > > > Am 05.02.2013 18:19, schrieb Matthias Thon: > > Hi Rolf, > > > > now hopefully the right debug information. Now after starting scanimage > > -A , it waits for the button information. I try different buttons > > (black, color) Changed before from JPEG to PDF or TIFF but scanimage > > waits till timeout. See the output. > > > > regards Matthias > > > > > > root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends# > scanimage > > -V > > scanimage (sane-backends) 1.0.24git; backend version 1.0.24 > > root at matze-Satellite-C660:/usr/local/src/sane-backends-git/sane-backends# > scanimage > > -A > > [sanei_debug] Setting debug level of pixma to 7. > > [pixma] pixma is compiled without pthread support. > > [pixma] pixma version 0.17.0 > > [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at > libusb:002:005 > > [pixma] sanei_bjnp_find_devices: > > [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3 > > [pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4 > > [pixma] eth0 is IPv6 capable, sending broadcast, socket = 5 > > [pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6 > > [pixma] pixma_find_scanners() found 1 devices > > [pixma] pixma_collect_devices() found Canon PIXMA MG6200 at > libusb:002:005 > > [pixma] sanei_bjnp_find_devices: > > [pixma] eth0 is IPv4 capable, sending broadcast, socket = 3 > > [pixma] wlan0 is IPv4 capable, sending broadcast, socket = 4 > > [pixma] eth0 is IPv6 capable, sending broadcast, socket = 5 > > [pixma] wlan0 is IPv6 capable, sending broadcast, socket = 6 > > [pixma] pixma_open(): Canon PIXMA MG6200 > > > > All options specific to device `pixma:04A91755_14B4F6': > > Scan mode: > > --resolution auto||75|150|300|600|1200|2400|4800dpi [75] > > Sets the resolution of the scanned image. > > --mode auto|Color|Gray|Lineart [Color] > > Selects the scan mode (e.g., lineart, monochrome, or color). > > --source Flatbed [Flatbed] > > Selects the scan source (such as a document-feeder). Set source > > before > > mode and resolution. Resets mode and resolution to auto values. > > --button-controlled[=(yes|no)] [no] > > When enabled, scan process will not start immediately. To > proceed, > > press "SCAN" button (for MP150) or "COLOR" button (for other > > models). > > To cancel, press "GRAY" button. > > Gamma: > > --custom-gamma[=(auto|yes|no)] [yes] > > Determines whether a builtin or a custom gamma-table should be > used. > > --gamma-table auto|0..255,... > > Gamma-correction table. In color mode this option equally > > affects the > > red, green, and blue channels simultaneously (i.e., it is an > > intensity > > gamma table). > > --gamma auto|0.299988..5 [2.2] > > Changes intensity of midtones > > Geometry: > > -l auto|0..216.069mm [0] > > Top-left x position of scan area. > > -t auto|0..297.011mm [0] > > Top-left y position of scan area. > > -x auto|0..216.069mm [216.069] > > Width of scan-area. > > -y auto|0..297.011mm [297.011] > > Height of scan-area. > > Buttons: > > --button-update > > Update button state > > [pixma] Sending time: '13/02/05 18:12' > > [pixma] No response yet. Timed out in 8 sec. > > [pixma] No response yet. Timed out in 7 sec. > > [pixma] No response yet. Timed out in 6 sec. > > [pixma] No response yet. Timed out in 5 sec. > > [pixma] No response yet. Timed out in 4 sec. > > [pixma] No response yet. Timed out in 3 sec. > > [pixma] No response yet. Timed out in 2 sec. > > [pixma] No response yet. Timed out in 1 sec. > > [pixma] WARNING: Error in response phase. cmd:eb80 > > [pixma] If the scanner hangs, reset it and/or unplug the USB cable. > > --button-1 <int> [0] [read-only] > > Button 1 > > --button-2 <int> [0] [read-only] > > Button 2 > > --original <int> [0] [read-only] > > Type of original to scan > > --target <int> [0] [read-only] > > Target operation type > > Extras: > > --threshold auto|0..100% (in steps of 1) [inactive] > > Select minimum-brightness to get a white point > > --threshold-curve auto|0..127 (in steps of 1) [inactive] > > Dynamic threshold curve, from light to dark, normally 50-65 > > > > [pixma] pixma_close(): Canon PIXMA MG6200 > > root at matze-Satellite-C660 > :/usr/local/src/sane-backends-git/sane-backends# > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20130205/d72b2fea/attachment-0001.html>