Am 12.12.2014 um 03:27 schrieb Rolf Leggewie: > On 12.12.2014 05:07, Wilhelm wrote: >> I must admit, actually I have no idea whar ist going wrong here. I see >> that the scanner and all options are recognized as in the >> call-from-shell case. > > Wilhelm, thank you for having a look. I must admit that the logs were > gotten a few weeks ago. It is quite possible that my memory of what I > was doing at what point in time was faulty. My apologies about that. I > am only starting to learn how to decipher the logs on my own (totally > impossible feat at log level 7, hahaha). > > Given that you were unable to see any difference I started a re-run and > inserted some markers into syslog with the logger command to make sure I > will be able to gather what happened when this time. From what I > understand now, it seems that the scanner is indeed NOT recognized. How > can that come about, especially given that on a call from the > command-line things work just fine with the same configuration?
Be sure that scanbd uses the correct location of libsane config files (see ReadMe). In most cases this will be a seperate directory (e.g. /etc/scanbd) where all configs and dll.conf are. This dll.conf must not contain the net-backend. On the other hand the standard libsane config location (/etc/sane) has to contain a dll.conf with only the net backend. I changed trunk to include an additional debug output to log the env-var SANE_CONFIG_DIR. Please check the startup-script if the right dir ist set ... > > FTR, I started scandbd from the command-line, waited a few seconds and > then pressed each button once. This seems to have been successful. In > the case of init, I started the program via the services command, > realized the scanner was NOT recognized, unplugged and replugged it and > then pressed all buttons (even though apparently the scanner had not > been recognized). > > Regards > > Rolf > > > -- Wilhelm w.me...@unix.net -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org