On Wed, Jan 21, 2015 at 3:47 AM, Maryse Hugues Legay Rochette < hugues.legay02...@orange.fr> wrote:
> Hello > First, sorry for my bad english, but I will try it anyway. > Hello, I found your message in my spam folder, not sure if it was because of formatting (HTML?) or because of non-English words somewhere, but probably this happens a lot, please be patient.... > I send you this mail because I need some help. Maybe would you explain me > how to proceed. > Unfortunately, I am not familiar with the installation on MacOSX using the packages (although I know of the packages). > I would like to run a HP scanner "Scanjet 5300c » on a iMac os x 10.10 , > so as this one doesn’t see it, I searched for a solution. Founding SANE > project, I downloaded Mattias Ellert's binary installer packages > <http://www.ellert.se/twain-sane/> of sane-backends, the TWAIN SANE > interface and related software. > Now this software appears on the computer, in the section printer and > scanner. However when it is activated, the application does not found my > scan. "Awaiting the scanner" it’s said. > Then, once the driver libraries opened I saw there was not Scanjet 5300C > driver in it, although it is indicated on the page of SANE site to the > section « Supported device », as you can see below? that it is in fact. > The "driver" is the avision backend, and that supports the scanjet 5300C. You won't find a driver called "ScanJet 5300C". The avision backend, if compiled, will be used by SANE at startup to search for attached devices matching the supported USB IDs registered (programmed into) that backend. So if the avision backend is in the 1.0.24 SANE package, and this avision backend supports the ScanJet 5300C, then running the frontend (whatever application you use that uses SANE to do the scanning) should result in your scanner being detected. If not, then conceivably either the frontend is not using the installed SANE yet, or the avision backend included does not support the ScanJet 5300C, or there is a permission problem somewhere that prevents the scanner from being used. Regards, Gernot Hassenpflug > > > > BackendVersionSupported DevicesManual PageManufacturerModelInterfaceUSB id > StatusCommentBackends included in the current tarball - see SANE > Distribution <http://www.sane-project.org/source.html>avision > <http://skull.piratehaven.org/~mike/sane/avision.html>Build: 296 > Hewlett-Packard <http://www.hp.com/>ScanJet 5300CUSB0x03f0/0x0701complete1 > pass, 2400 dpi - some FW revisions have x-axis image scaling problems over > 1200 dpisane-avision > <http://www.sane-project.org/man/sane-avision.5.html>ScanJet > 5370CUSB0x03f0/0x0701good1 pass, 2400 dpi - some FW revisions have x-axis > image scaling problems over 1200 dpi > > > What can I do ? > So I hope that you will send me an answer which can help me to solve these > difficulties. > In advance thank you to study my demand. > > Hugues Legay > 3 allée des érables > CEYZERIAT > 01250 > FRANCE > > hugues.legay02...@orange.fr > > -- > sane-devel mailing list: sane-devel@lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-requ...@lists.alioth.debian.org >
-- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
