hmm- I have never actually seen an fi-65f, I only have user reports from my patches. However, the initial development was done with firmware 65f_0A01.nal Can you try to extract that version (or later) from the Fujitsu windows drivers? You might have to get the latest version from their website. Maybe there is a difference? Otherwise, you would need to get a log of the scanner in action under windows, so we could try to reproduce the commands.
allan On Sat, Mar 14, 2015 at 11:37 PM, Jonas Neubert <jonas.neub...@gmail.com> wrote: > Thanks Allan, my mind was so set on thinking of "output" as the scanner > output, I didn't even consider that this error might about the program's > output! > > When doing 'scanimage > file.pnm' the first attempt at scanning an image now > ends with the same "scanimage: sane_start: Error during device I/O" as > scanimage -T. Full output: > > > jonas@sane-scanner:~$ sudo SANE_DEBUG_DLL=256 SANE_DEBUG_EPJITSU=25 > scanimage > file.pnm > [sanei_debug] Setting debug level of dll to 256. > [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends > 1.0.25git > [dll] sane_init/read_dlld: attempting to open directory `./dll.d' > [dll] sane_init/read_dlld: attempting to open directory > `/etc/sane.d/dll.d' > [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' > [dll] sane_init/read_dlld: done. > [dll] sane_init/read_config: reading dll.conf > [dll] add_backend: adding backend `epjitsu' > [dll] sane_get_devices > [dll] load: searching backend `epjitsu' in `/usr/lib/sane' > [dll] load: trying to load `/usr/lib/sane/libsane-epjitsu.so.1' > [dll] load: dlopen()ing `/usr/lib/sane/libsane-epjitsu.so.1' > [dll] init: initializing backend `epjitsu' > [sanei_debug] Setting debug level of epjitsu to 25. > [epjitsu] sane_init: start > [epjitsu] sane_init: epjitsu backend 1.0.27, from sane-backends 1.0.25git > [epjitsu] sane_init: finish > [dll] init: backend `epjitsu' is version 1.0.27 > [epjitsu] sane_get_devices: start > [epjitsu] sane_get_devices: reading config file epjitsu.conf > [epjitsu] sane_get_devices: firmware > '/usr/share/sane/epjitsu/60f_0A00.nal' > [epjitsu] sane_get_devices: looking for 'usb 0x04c5 0x10c7' > [epjitsu] sane_get_devices: firmware > '/usr/share/sane/epjitsu/300_0C00.nal' > [epjitsu] sane_get_devices: looking for 'usb 0x04c5 0x1156' > [epjitsu] sane_get_devices: firmware > '/usr/share/sane/epjitsu/300M_0C00.nal' > [epjitsu] sane_get_devices: looking for 'usb 0x04c5 0x117f' > [epjitsu] sane_get_devices: firmware > '/usr/share/sane/epjitsu/1300_0C26.nal' > [epjitsu] sane_get_devices: looking for 'usb 0x04c5 0x11ed' > [epjitsu] sane_get_devices: firmware > '/usr/share/sane/epjitsu/65f_0000.nal' > [epjitsu] sane_get_devices: looking for 'usb 0x04c5 0x11bd' > [epjitsu] attach_one: start 'libusb:001:004' > [epjitsu] attach_one: init struct > [epjitsu] attach_one: connect fd > [epjitsu] connect_fd: start > [epjitsu] connect_fd: opening USB device > [epjitsu] connect_fd: finish > [epjitsu] load_fw: start > [epjitsu] get_stat: start > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 2 bytes > [epjitsu] in: reading 2 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 2 bytes > [epjitsu] do_cmd: finish > [epjitsu] load_fw: read firmware file > /usr/share/sane/epjitsu/65f_0000.nal ok > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 1 bytes > [epjitsu] do_cmd: finish > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 4 bytes, timeout 10000 > [epjitsu] cmd: wrote 4 bytes, retVal 0 > [epjitsu] out: writing 65536 bytes, timeout 10000 > [epjitsu] out: wrote 65536 bytes, retVal 0 > [epjitsu] do_cmd: finish > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 1 bytes, timeout 10000 > [epjitsu] cmd: wrote 1 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 1 bytes > [epjitsu] do_cmd: finish > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 1 bytes > [epjitsu] do_cmd: finish > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 1 bytes, timeout 10000 > [epjitsu] cmd: wrote 1 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 1 bytes > [epjitsu] do_cmd: finish > [epjitsu] get_stat: start > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 2 bytes > [epjitsu] in: reading 2 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 2 bytes > [epjitsu] do_cmd: finish > [epjitsu] get_ident: start > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 32 bytes > [epjitsu] in: reading 32 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 32 bytes > [epjitsu] do_cmd: finish > [epjitsu] get_ident: finish > [epjitsu] attach_one: Found FUJITSU scanner fi-65F 0A01 at libusb:001:004 > [epjitsu] attach_one: Found fi-65F > [epjitsu] attach_one: init options > [epjitsu] attach_one: init settings > [epjitsu] change_params: start > [epjitsu] change_params: finish > [epjitsu] disconnect_fd: start > [epjitsu] disconnecting usb device > [epjitsu] disconnect_fd: finish > [epjitsu] attach_one: finish > [epjitsu] sane_get_devices: found scanner libusb:001:004 > [epjitsu] sane_get_devices: found 1 scanner(s) > [epjitsu] sane_get_devices: finish > [dll] sane_get_devices: found 1 devices > [dll] sane_open: trying to open `epjitsu:libusb:001:004' > [epjitsu] sane_open: start > [epjitsu] sane_open: searching currently attached scanners > [epjitsu] sane_open: device libusb:001:004 requested, attaching > [epjitsu] sane_open: device libusb:001:004 found > [epjitsu] connect_fd: start > [epjitsu] connect_fd: opening USB device > [epjitsu] connect_fd: finish > [epjitsu] sane_open: finish > [dll] sane_open: open successful > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=0) > [epjitsu] sane_get_option_descriptor: 0 > [dll] > sane_control_option(handle=0x1a06b90,option=0,action=0,value=0x7fff6b93fdac,info=(nil)) > [epjitsu] sane_control_option: get value for '' (0) > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=0) > [epjitsu] sane_get_option_descriptor: 0 > [dll] > sane_control_option(handle=0x1a06b90,option=0,action=0,value=0x7fff6b93fce8,info=(nil)) > [epjitsu] sane_control_option: get value for '' (0) > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=1) > [epjitsu] sane_get_option_descriptor: 1 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=2) > [epjitsu] sane_get_option_descriptor: 2 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=3) > [epjitsu] sane_get_option_descriptor: 3 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=4) > [epjitsu] sane_get_option_descriptor: 4 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=5) > [epjitsu] sane_get_option_descriptor: 5 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=6) > [epjitsu] sane_get_option_descriptor: 6 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=7) > [epjitsu] sane_get_option_descriptor: 7 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=8) > [epjitsu] sane_get_option_descriptor: 8 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=9) > [epjitsu] sane_get_option_descriptor: 9 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=10) > [epjitsu] sane_get_option_descriptor: 10 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=11) > [epjitsu] sane_get_option_descriptor: 11 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=12) > [epjitsu] sane_get_option_descriptor: 12 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=13) > [epjitsu] sane_get_option_descriptor: 13 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=14) > [epjitsu] sane_get_option_descriptor: 14 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=15) > [epjitsu] sane_get_option_descriptor: 15 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=16) > [epjitsu] sane_get_option_descriptor: 16 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=17) > [epjitsu] sane_get_option_descriptor: 17 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=18) > [epjitsu] sane_get_option_descriptor: 18 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=19) > [epjitsu] sane_get_option_descriptor: 19 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=20) > [epjitsu] sane_get_option_descriptor: 20 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=21) > [epjitsu] sane_get_option_descriptor: 21 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=22) > [epjitsu] sane_get_option_descriptor: 22 > [dll] sane_get_option_descriptor(handle=0x1a06b90,option=23) > [epjitsu] sane_get_option_descriptor: 23 > [dll] sane_start(handle=0x1a06b90) > [epjitsu] sane_start: start > [epjitsu] sane_start: first page > [epjitsu] teardown_buffers: start > [epjitsu] teardown_buffers: finish > [epjitsu] change_params: start > [epjitsu] change_params: finish > [epjitsu] setup_buffers: start > [epjitsu] setup_buffers: finish > [epjitsu] load_lut: start > [epjitsu] load_lut: > [epjitsu] 000: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 > [epjitsu] 010: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 > [epjitsu] 020: 32 32 32 32 32 32 32 32 32 32 33 34 34 35 36 37 > [epjitsu] 030: 38 38 39 3a 3b 3c 3d 3d 3e 3f 40 41 41 42 43 44 > [epjitsu] 040: 45 45 46 47 48 49 49 4a 4b 4c 4d 4d 4e 4f 50 51 > [epjitsu] 050: 52 52 53 54 55 56 56 57 58 59 5a 5a 5b 5c 5d 5e > [epjitsu] 060: 5e 5f 60 61 62 63 63 64 65 66 67 67 68 69 6a 6b > [epjitsu] 070: 6b 6c 6d 6e 6f 6f 70 71 72 73 74 74 75 76 77 78 > [epjitsu] 080: 78 79 7a 7b 7c 7c 7d 7e 7f 80 80 81 82 83 84 85 > [epjitsu] 090: 85 86 87 88 89 89 8a 8b 8c 8d 8d 8e 8f 90 91 91 > [epjitsu] 0a0: 92 93 94 95 96 96 97 98 99 9a 9a 9b 9c 9d 9e 9e > [epjitsu] 0b0: 9f a0 a1 a2 a2 a3 a4 a5 a6 a6 a7 a8 a9 aa ab ab > [epjitsu] 0c0: ac ad ae af af b0 b1 b2 b3 b3 b4 b5 b6 b7 b7 b8 > [epjitsu] 0d0: b9 ba bb bc bc bd be bf c0 c0 c1 c2 c3 c4 c4 c5 > [epjitsu] 0e0: c6 c7 c8 c8 c9 ca cb cc cd cd cd cd cd cd cd cd > [epjitsu] 0f0: cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd > [epjitsu] load_lut: finish > [epjitsu] coarsecal: start > [epjitsu] set_window: start, window 0 > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 9 > [epjitsu] in: return error 'Error during device I/O' > [epjitsu] set_window: error sending cmd > [epjitsu] coarsecal: error sending setwindow > [epjitsu] sane_start: ERROR: failed to coarsecal > [epjitsu] sane_cancel: start > [epjitsu] sane_cancel: finish > scanimage: sane_start: Error during device I/O > [dll] sane_cancel(handle=0x1a06b90) > [epjitsu] sane_cancel: start > [epjitsu] sane_cancel: finish > [dll] sane_close(handle=0x1a06b90) > [epjitsu] sane_close: start > [epjitsu] sane_cancel: start > [epjitsu] sane_cancel: finish > [epjitsu] lamp: start (0) > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 1 bytes > [epjitsu] do_cmd: finish > [epjitsu] lamp: cmd bad status? > [epjitsu] disconnect_fd: start > [epjitsu] disconnecting usb device > [epjitsu] disconnect_fd: finish > [epjitsu] sane_close: finish > [dll] sane_exit: exiting > [dll] sane_exit: calling backend `epjitsu's exit function > [epjitsu] sane_exit: start > [epjitsu] destroy: start > [epjitsu] teardown_buffers: start > [epjitsu] teardown_buffers: finish > [epjitsu] destroy: finish > [epjitsu] sane_exit: finish > [dll] sane_exit: finished > > > > > > ---- On Sat, 14 Mar 2015 17:50:04 -0700 m. allan noah wrote ---- >>Well- 'output is not a file' is your first clue. You need to redirect >>the output of scanimage somewhere: >> >>scanimage [your options] > file.pnm >> >>see if repeated invocations of that will work for you. >> >>allan >> > -- "well, I stand up next to a mountain- and I chop it down with the edge of my hand" -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org