Hi, The MF6100 Series scanner is only working with flatbed scans and with single page scans in adf.
Just now, I'm struggling with multiple pages in adf and duplex adf. A patch will take a while, because I only have sporadical access to a MF6140 scanner. Everytime the scanner reports an error on the lcd display, I need to wait until scanimage ends, or faster I send a ^C to terminate scanimage. However, I always need to reconnect the usb cable before scanimage can start the next scan. The status of this scanner still is untested. Cheers, Rolf Am 27.06.2015 um 20:02 schrieb Louis Lagendijk: > On Mon, 2015-06-22 at 14:58 +0300, Michael Shigorin wrote: >> On Wed, Apr 01, 2015 at 06:19:05PM +0200, Louis Lagendijk wrote: >>> Before anything: if scanning over USB does not work, trying to >>> scan over the network is bound to fail. >> >> Got that; both devices and a winxp vm are handy today (will be >> there next week hopefully too), here's a 15 Mb usbsnoop log: >> http://fly.osdn.org.ua/~mike/tmp/sane-pixma/Canon-iR1133-scan-300dpi.usblog.xz >> >>> for the MF8540 first a question: what did you use to initiate the scan? >> >> xsane and scanimage >> >> MF8540Cdn and MF6140dn are available for testing/dumping right now, >> trying against today's git... >> >>> It looks as if a scan was not attempted. Please try (over USB): >>> scanimage > filename >>> and see what happens. > > Can you please try the fixes I submitted to GIT today to see if they fix > the network issue with the MF devices? > >> Proper sounds but almost completely white image: >> http://fly.osdn.org.ua/~mike/tmp/sane-pixma/Canon-MF8540Cdn-scanimage.ppm.xz > > how did you scan? Please try > scanimage > test.ppm > to avoid problems due to settings from xsane etc. > >> >>> As you saw it is not clear whether the device is supported with >>> the current pixma backend. Maybe somebody on the list that >>> knows the backend better than I do can help you with that (the >>> MF8500 series is listed in pixma_imageclass.c, so it is >>> probably possible to get it working, I only wrote the >>> networking code). >> >> Thank you :-) > >> >>> the ImageRunner 1133 is listed too in the same file, so getting >>> it to work is probably possible too >> >> It _does_ work for me as of RELEASE_1_0_24-292-g8c51579: >> http://fly.osdn.org.ua/~mike/tmp/sane-pixma/Canon-iR1133iF-scanimage.ppm.xz >> (the same vendor provided test print) >> >>> The MF6100 series is not listed, but it again might be quite >>> possible to get it to work. >> >> The same almost white image as with 8540: >> http://fly.osdn.org.ua/~mike/tmp/sane-pixma/Canon-MF6140dn-scanimage.ppm.xz >> > As Rolf commented in a mail from April 3 the MF6100 series is added in > GIT, so it should work now. > so please try scanning with scanimage and see if that works over USB and > if it works over the network after todays fixes. > > Kind regards, Louis > > > -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
