Istvan Gabor írta: >Hello: > >I have an Epson Perfection V10 scanner. I installed iscan drivers from the >downloaded file iscan-gt-s600-bundle-1.0.0.x64.rpm.tar.gz on openSUSE 13.1 64 >bit. It went smoothly and the scanner works with sane and xsane. In xsane I >can only choose resolutions 133 200 400 600 800 1200 etc. I would expect 100 >and 300 on the list too. scanimage --help -d epkowa doesn't list there >resolutions either: > > --resolution 200|400|600|800|1200|1600|3200dpi [200] > Sets the resolution of the scanned image. > --x-resolution 133|200|400|600|800|1200|1600|3200dpi [200] > Sets the horizontal resolution of the scanned image. > --y-resolution 133|200|400|600|800|1200|1600|2400|3200|4800|6400|9600dpi > [200] > Sets the vertical resolution of the scanned image. > >The scanner should be able to scan at those resolutions as well. How could I >set scan resolution to 100 or 300 dpi?
I have tried Epson's iscan utility. It offers the following resolutions for the scanner: 50 72 96 150 200 240 300 360 400 600 720 800 1200 1600 2400 3200 4800 6400 9600 Sane/xsane offers only these resolutions: 133 200 400 600 800 1200 1600 3200. Not only that sane offers less resolution options but it also offers some which is not on the iscan list: 133. Where does sane get the resolutions for the scanner? I guess the resolutions are specified by sane and not by the proprietary Epson drivers or else iscan wouldn't show them either. I wouldn't mind building sane from sources if I knew what to edit or change. Any help would be appreciated. Thanks, Istvan -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org
