On 2017-12-22 at 08:25:45 +0100, Klaus Kaempf wrote: > Please run > export SANE_DEBUG_PIEUSB=11 > in a shell and then start xsane from there. > > This should report the model number. Add it to pieusb.conf and you > should be all set.
Hi Klaus, thank you very much! Yes, it returns [pieusb] model .......................: 0x002f This is the same value as for the DigitDia 4000. It works now but the scanner is not detected unless 'pieusb' is added to dll.conf . > Please add 'GROUP="lp",' to this list to give you full access to the > usb device. Done. Can now run it as a mortal user. The next problem to solve is to find a suitable ICM file for this scanner. Colors are still too dark and incorrect and I doubt that I can determine the appropriate values manually. I played with Gamma/brightness/contrast but the colors are still wrong and I therefore assume that these values have to be determined separately for each color. Iv'e got two DVDs, "CyberView X" and "Adobe Photoshop Elements 6". On the "CyberView X" DVD I found a file "Generic Positive.ft" but I fear that the file format isn't understood be sane. See an excerpt of this file below. How did you solve this problem? Do you have an appropriate ICM file for your Reflecta 6000? I'm not sure whether what I bought is still complete. Another thing I have not found out yet is how to make use the slide transport supported by the scanner. When I set SANE_DEBUG_PIEUSB=13 and activate "Advance slide", I see [pieusb] set advcane [#10] to 1 (there is a typo BTW, s/advcane/advance/) but the same slide is scanned again when I acquire a new preview. I have abt. 7200 slides and I hope that I can digitize them without too much manual surgery. The new format of pieusb.conf is # usb <vendor-id> <device-id> <model-nr> <has-slide-transport> When I set <has-slide-transport> to 0x01, xsane complains about IO-errors[1]. On the other hand we have # Autodetect (built-in) # Reflecta DigitDia 6000 Multiple Slide Scanner # usb 0x05e3 0x0142 0x3a 0x01 So I assume that 0x01 should be the correct value for my scanner too. Thanks again and Merry Xmas, Reinhard [1] "Io, the Greek goddess of input and output" Donald E. Knuth, The METAFONTbook File "GAMMA/Generic Positive.ft" ------------------------------------------------------------------ # Version 1.4; # Film term file for all reversal film; # Created using Q60 unit; # Film term created by B. Lin; FilmClass REV; FilmMfgr Generic; FilmName Generic Positive; FilmLevel 4 4 4; CreationDate 07102003; FilmBalance 140 140 140; FilmLut 0.00 0.00 0.00 7.50 7.50 6.00 15.06 15.11 12.20 22.67 22.83 18.60 30.33 30.67 25.20 38.06 38.61 32.00 [...lines omitted...] 4093.22 4093.18 4093.85 4094.11 4094.09 4094.43 4095.00 4095.00 4095.00; FilmMatR 1.4234 -0.3230 0.0061 -29.7088; FilmMatG 0.0600 0.9677 0.0719 -31.3147; FilmMatB 0.1562 -0.5104 1.4530 -28.9059; ------------------------------------------------------------------ -- ------------------------------------------------------------------ Reinhard Kotucha Phone: +49-511-3373112 Marschnerstr. 25 D-30167 Hannover mailto:reinhard.kotu...@web.de ------------------------------------------------------------------ -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org