Hello, I am struggling for a long time with this particular model. Once I got an info that it's fully supported, but I still no clue. According to the official page its status is untested.
I am on Ubuntu Mate 17.10, kernel 4.13, sane 1.0.27 sane-find-scanner: found USB scanner (vendor=0x04a9 [Language Error], product=0x27a9 [Language Error]) at libusb:001:004 scanimage -L: device `pixma:04A927A9_0165OE504DB8' is a CANON Canon i-SENSYS MF210 Series multi-function peripheral scanimage -T: scanimage: scanning image of size 640x877 pixels at 24 bits/pixel scanimage: acquiring RGB frame, 8 bits/sample scanimage: reading one scanline, 1920 bytes... PASS scanimage: reading one byte... PASS scanimage: stepped read, 2 bytes... PASS scanimage: stepped read, 4 bytes... PASS scanimage: stepped read, 8 bytes... PASS scanimage: stepped read, 16 bytes... PASS scanimage: stepped read, 32 bytes... PASS scanimage: stepped read, 64 bytes... PASS scanimage: stepped read, 128 bytes... PASS scanimage: stepped read, 256 bytes... PASS scanimage: stepped read, 512 bytes... PASS scanimage: stepped read, 1024 bytes... PASS scanimage: stepped read, 2048 bytes... PASS scanimage: stepped read, 2047 bytes... PASS scanimage: stepped read, 1023 bytes... PASS scanimage: stepped read, 511 bytes... PASS scanimage: stepped read, 255 bytes... PASS scanimage: stepped read, 127 bytes... PASS scanimage: stepped read, 63 bytes... PASS scanimage: stepped read, 31 bytes... PASS scanimage: stepped read, 15 bytes... PASS scanimage: stepped read, 7 bytes... PASS scanimage: stepped read, 3 bytes... PASS My experience is that it halts right after start. Is there any special configuration, udev, etc needed? Thanks in advance!
-- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org