On Sat, 2018-02-24 at 09:42 +0100, Frank Dornheim wrote: > Hello, > > I'm trying to scan with a Canon MF8360cdn. He is supported in the > PIXMA manpage. > I see that it is found, but no scanner is output afterwards. > > $ env SANE_DEBUG_BJNP="5" scanimage --help > [sanei_debug] Setting debug level of bjnp to 5. > [bjnp] sanei_bjnp_find_devices, pixma backend version: 0.17.37 > [bjnp] sanei_bjnp_find_devices: No devices specified in > configuration file. > [bjnp] sanei_bjnp_find_devices: Added all configured scanners, > now > do auto detection... > [bjnp] prepare_socket: lo is not a valid IPv4 interface, > skipping... > [bjnp] prepare_socket: enp2s0 is IPv4 capable, sending broadcast, > socket = 36 > [bjnp] prepare_socket: virbr0 is IPv4 capable, sending broadcast, > socket = 37 > [bjnp] prepare_socket: virbr1 is IPv4 capable, sending broadcast, > socket = 38 > [bjnp] prepare_socket: lxcbr0 is IPv4 capable, sending broadcast, > socket = 39 > [bjnp] sanei_bjnp_find_devices: Select returned, time left > 0.499983.... > [bjnp] sanei_find_devices: Discover response: > [bjnp] 00000000:4d 46 4e 50 82 01 00 00 00 00 00 00 00 00 00 10 > [bjnp] 00000010:00 01 80 00 06 04 88 87 17 0d 8a 7a 00 00 00 00 > [bjnp] get_scanner_name: Forward lookup for mf8300c.bodomos.lan > succeeded, using as hostname > [bjnp] > bjnp_allocate_device(mfnp://mf8300c.bodomos.lan:8610/timeout=1000) 0 > [bjnp] get_scanner_name: Forward lookup for mf8300c.bodomos.lan > succeeded, using as hostname > [bjnp] setup_udp_socket: Setting up a UDP socket, dest: > 192.168.178.131 port 8610 > [bjnp] bjnp_get_scanner_mac_address: Discover response: > [bjnp] 00000000:4d 46 4e 50 82 01 00 00 00 00 00 00 00 00 00 10 > [bjnp] 00000010:00 01 80 00 06 04 88 87 17 0d 8a 7a 00 00 00 00 > [bjnp] bjnp_allocate_device: Scanner not yet in our list, added > it: mf8300c.bodomos.lan:8610 > [bjnp] get_scanner_id: Get scanner identity > [bjnp] 00000000:4d 46 4e 50 02 30 00 00 00 01 00 00 00 00 00 00 > [bjnp] setup_udp_socket: Setting up a UDP socket, dest: > 192.168.178.131 port 8610 > [bjnp] get_scanner_id: scanner identity: > [bjnp] 00000000:4d 46 4e 50 82 30 00 00 00 01 00 00 00 00 00 56 > [bjnp] 00000010:4d 46 47 3a 43 41 4e 4f 4e 3b 43 4d 44 3a 4d 46 > [bjnp] 00000020:4e 50 31 2c 4d 75 6c 74 69 50 41 53 53 20 32 2e > [bjnp] 00000030:31 3b 4d 44 4c 3a 4d 46 38 33 30 30 43 20 53 65 > [bjnp] 00000040:72 69 65 73 3b 43 4c 53 3a 49 4d 47 3b 44 45 53 > [bjnp] 00000050:3a 43 61 6e 6f 6e 20 4d 46 38 33 30 30 43 20 53 > [bjnp] 00000060:65 72 69 65 73 3b > [bjnp] get_scanner_id: Scanner identity string = > MFG:CANON;CMD:MFNP1,MultiPASS 2.1;MDL:MF8300C > Series;CLS:IMG;DES:Canon > MF8300C Series; - length = 86 > [bjnp] get_scanner_id: Scanner model = MF8300C Series > [bjnp] add_scanner: New scanner added: > mfnp://mf8300c.bodomos.lan:8610/timeout=1000, serial mf8300c, mac > address: 8887170d8a7a. > [bjnp] sanei_find_devices: Discover response: > [bjnp] 00000000:42 4a 4e 50 02 01 00 00 00 00 00 00 00 00 00 00 > [bjnp] sanei_bjnp_find_devices: Select returned, time left > 0.499996.... > [bjnp] sanei_find_devices: Discover response: > [bjnp] 00000000:4d 46 4e 50 82 01 00 00 00 00 00 00 00 00 00 10 > [bjnp] 00000010:00 01 80 00 06 04 88 87 17 0d 8a 7a 00 00 00 00 > [bjnp] get_scanner_name: Forward lookup for mf8300c.bodomos.lan > succeeded, using as hostname > [bjnp] > bjnp_allocate_device(mfnp://mf8300c.bodomos.lan:8610/timeout=1000) 1 > [bjnp] get_scanner_name: Forward lookup for mf8300c.bodomos.lan > succeeded, using as hostname > [bjnp] setup_udp_socket: Setting up a UDP socket, dest: > 192.168.178.131 port 8610 > [bjnp] bjnp_get_scanner_mac_address: Discover response: > [bjnp] 00000000:4d 46 4e 50 82 01 00 00 00 00 00 00 00 00 00 10 > [bjnp] 00000010:00 01 80 00 06 04 88 87 17 0d 8a 7a 00 00 00 00 > [bjnp] add_scanner: Scanner at > mfnp://mf8300c.bodomos.lan:8610/timeout=1000 was added before, good! > [bjnp] sanei_find_devices: Discover response: > [bjnp] 00000000:42 4a 4e 50 02 01 00 00 00 00 00 00 00 00 00 00 > [bjnp] sanei_find_devices: scanner discovery finished... > scanimage: no SANE devices found > > Thanks Con > Scanimage needs to have its output redirected to a file, e.g.: scanimage > tt If you do not do that it should give you something like: [louis@travel tmp]$ scanimage scanimage: output is not a file, exiting [louis@travel tmp]$
What does scanimage -L return? kind regards, Louis -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org