Please try the old scanbuttond-backend for this type of scanner - it should work. The HP sane backend sadly doesn't support the buttons on this scanner.
Am 06.03.2018 um 15:46 schrieb Jared Hedegaard: >> >> Main question: does the HP 5590 support button presses or am I just setting >> this up incorrectly? >> >> I'm been successful using scanbd with SANE backends to get scanning working >> over my network and locally on the host machine, but I can't seem to get it >> to recognize button presses, either running scanbd in foreground or >> background. >> >> For past testing, it seems that actions defined in scanbd.conf are used to >> tie to the backend options? From searching /var/log/syslog, I expected to >> track button presses or get some sort of trigger feedback, and I didn't >> think I needed an action set up for it. >> >> Any help on this one would be much appreciated. Thanks. >> >> Jared H >> > > After a bit more research, it looks like doing this with the SANE backend for > HP 5590 is not possible. scanbd is used to tie custom actions to the options > available on the scanner. In this case, none of the 10 options seem to return > values. They all look to be ones that I designate from some client software. > > scanbd: found active option[1] tl-x (type: 2) for device > hp5590:libusb:001:008 > scanbd: found active option[2] tl-y (type: 2) for device > hp5590:libusb:001:008 > scanbd: found active option[3] br-x (type: 2) for device > hp5590:libusb:001:008 > scanbd: found active option[4] br-y (type: 2) for device > hp5590:libusb:001:008 > scanbd: found active option[5] mode (type: 3) for device > hp5590:libusb:001:008 > scanbd: found active option[6] source (type: 3) for device > hp5590:libusb:001:008 > scanbd: found active option[7] resolution (type: 1) for device > hp5590:libusb:001:008 scanbd: found active option[8] extend-lamp-timeout > (type: 0) for device hp5590:libusb:001:008 > scanbd: found active option[9] wait-for-button (type: 0) for device > hp5590:libusb:001:008 > scanbd: found active option[10] preview (type: 0) for device > hp5590:libusb:001:008 > > In this case, it looks like I will have to try the old scanbuttond backends > for this, or see if there are optional enhancements for the SANE hp5590 > backend. > > Jared > -- sane-devel mailing list: sane-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-devel-requ...@lists.alioth.debian.org