On Tue, 2018-03-13 at 21:17 +0000, Patrick Roncagliolo wrote:
> Hi,
>
> I tested pixma version 0.17.46 thru USB. It works.
>
> However, after updating from your PPa, I'm not able to discover my
> printer on the network. pixma.conf seems to be ignored, no matter if
> I set the IP and multiple port combinations (8610, 8611, 8612, but
> whit wireshark I see only requests as broadcast on ports 8610 8612).
> What could have been changed? Any hints about some dumb things that I
> can have forgotten since last configuration?
>
> Il giorno dom 11 mar 2018 alle ore 12:26 Rolf Bensch <rolf@bensch-onl
> ine.de> ha scritto:
> > Hi Patrick,
> >
> >
> >
> > I just added button support for your scanner.
> >
> >
> >
> > If you're fetching the sources from git you can start testing now.
> >
> > Otherwise you must wait 'til tomorrow to get the update from my
> > ppa.
> >
> >
> >
> > Button support is basicly implemented in standard frontends. You
> > should
> >
> > use gscan2pdf to get best results. Or if you're familiar
> > programming
> >
> > bash scripts, you can use scanbd
> >
> > (https://sourceforge.net/projects/scanbd/). If you like I can
> > provide my
> >
> > pixma scripts.
> >
> >
> >
> > Hope this helps.
> >
> >
> >
> > Cheers,
> >
> > Rolf
> >
> >
I have an MB5050 myself and that works pretty well.
Can you please (in a shell) do:
export SANE_DEBUG_BJNP=20
scanimage -L 2> log
and mail the resulting log file?
Some of the most recent Canon scanners no longer support bjnp, butthe
MB2000 is as far as I know of the same generation as my MB5050, so I
expect bjnp till to be supported.
Please check your firewall settings (see man sane-pixma) to be sure
that traffic does not get blocked. There should be no reason to modify
the pixma.conf file, unless you are on WIFI: ome users report problems
oer WIFI.
See the bjnp-timeout settings in pixma.conf. A single line of
bjnp-timeout=5000
at the beginning of that file should in that case do the trick.
I decided against including that by default as it would cause long
delays for user using other backends
BR, Loujis
--
sane-devel mailing list: sane-devel@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
Unsubscribe: Send mail with subject "unsubscribe your_password"
to sane-devel-requ...@lists.alioth.debian.org
