Yes, it can be found here: http://sourceforge.net/projects/savonet/files/liquidsoap/1.1.1/
(liquidsoap-win32-1.1.1.zip) ++ Sam. On Fri, Jun 14, 2013 at 9:01 PM, M. Whitener <[email protected]> wrote: > Hi Romain - thank you for this response. Which leads to another question! > Is there a Windows build of 1.1.1 ? > Thank you in advance! > >> 2013/6/4 M. Whitener <[email protected]>: >> > I'm looking for help using sound card input on Windows. So far nothing >> > works. Any tips would be greatly appreciated. >> > Sorry to not be more specific. I've tried input.* and nothing is >> > defined. I've tried in( ) and it doesn't seem to provide any audio. > >> Recording on win32 is still an ongoing process. Liquidsoap 1.1.1 was >> the first build to provide an input operator, input.portaudio. > >> So, you should try to record using this operator. I believe that >> Bill's use of in() fall backs to input.portaudio as well. > >> I'm happy to read that in()/input.portaudio() worked for him. As for >> the vumeter, I wouldn't pay too much attention to it, this is more of >> a debugging operator than something that should be used in prod and I >> wouldn't be surprised if it turns out it may freeze liquidsoap >> altogether.. > >> Romain > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Savonet-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/savonet-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Savonet-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/savonet-users
