Winnie Lacesso wrote:
Greetings,
We'll buy server hardware soon to run a critical app that requires SL3.
Upgrade to SL4 later is probably a go, but initially it must be SL3.
If your new CPU supports virtualisation, then running SL3 in a virtual
machine under SL5 changes the question quite a deal, and may also give
you the option of running additional loads (including Windows if needed).
So SL308 would load with 2.4.21-47.0.1.ELsmp & yum update to
2.4.21-50.ELsmp.
The hardware may have Tyan S2925G2NR mobo which has nvidia nForce Pro 3400
chipset, with nvidia MCP55 SATA controller.
Some hunting shows:
. SL3.0.8 release notes: Nvidia Nforce(motherboard chipset) drivers:
IDE is supported. NO SUPPORT for ethernet, audio, sata.
That sounds bad. But:
. "Newer NVIDIA chipsets are AHCI, and use the ahci driver not sata_nv"
. both sata_nv & ahci drivers in SL3
. both sata_nv & ahci driver said "production" maturity
. "libata AHCI driver ahci became available starting 2.4.29-preX ..."
(that's later than SL308 kernel)
Questions:
. would the version of the ahci driver in SL3 be older than the version in
SL4?
. If it is older, would an older ahci driver version in SL3 have any
problem driving the nvidia MCP55 (or possibly even newer if a newer mobo)
SATA controller?
. If ahci can't or won't, will SL3 understand to use sata_nv driver
instead?
And would sata_nv have any problem driving the nvidia MCP55 (or possibly
even newer if a newer mobo) SATA controller?
many many thanks
--
Cheers
John
-- spambait
[EMAIL PROTECTED] [EMAIL PROTECTED]
Please do not reply off-list