Looks like it should work. Is there nothing in dmesg output about it?
On Thu, 4 Feb 2010, Gasser Marc wrote:
thank you for the reply.
Well, it does and the driver is loaded (outputs below).
Maybe you could test your phone once with SL and give me some
feedback, that would be great. However, it's not urgent.
Marc
#### cat /proc/bus/usb/devices
T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 2
P: Vendor=0421 ProdID=01c7 Rev= 3.16
S: Manufacturer=Nokia
S: Product=N900 (Storage Mode)
S: SerialNumber=372041756775
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
C: #Ifs= 1 Cfg#= 2 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
### cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: WDC WD2500AAJS-0 Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: TSSTcorp Model: CDDVDW TS-H653G Rev: FS00
Type: CD-ROM ANSI SCSI revision: 05
Host: scsi8 Channel: 00 Id: 00 Lun: 00
Vendor: Nokia Model: N900 Rev: 031
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi8 Channel: 00 Id: 00 Lun: 01
Vendor: Nokia Model: N900 Rev: 031
Type: Direct-Access ANSI SCSI revision: 02
########################################################################
Stephen J. Gowdy wrote:
usb-storage module should be loaded automatically and it should end up
in /proc/scsi/scsi.
I have the same phone so could have checked if I had the USB cable
with me... I have used it with Fedora 12 after selecting Storage Mode
on the phone (it looks like you did from below).
What does /proc/bus/usb/devices show? It should have usb-storage
listed as the Driver= for it.
On Thu, 4 Feb 2010, Gasser Marc wrote:
Hello,
anybody has an idea how to mount a mobile phone via usb
in SL51.
Neither fdisk -l nor parted can see a device file for the mobile,
only lsusb (see below) shows that it is plugged in.
Thanks for help.
Regards,
Marc Gasser
PSI-Villigen, CH
### output of lsusb -v
Bus 007 Device 004: ID 0421:01c7 Nokia Mobile Phones
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x01c7
bcdDevice 3.16
iManufacturer 1 Nokia
iProduct 2 N900 (Storage Mode)
iSerial 3 372041756775
bNumConfigurations 2
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 Max power
bmAttributes 0x80
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 6 Mass Storage
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 5 Self-powered
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 6 Mass Storage
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 2
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | CERN Office: 8-1-11|
|http://cern.ch/gowdy/ | CH-1211 Geneva 23 |
| | Switzerland |
|EMail: go...@cern.ch | Tel: +41 76 487 2215 |
\------------------------------------+-------------------------/
