I must have messed up. I only see debugCount and JniHeaderDir bookmarks at the 
moment.

Jason

From: William Blevins 
Sent: Wednesday, July 29, 2015 4:50 PM
To: SCons developer list 
Subject: Re: [Scons-dev] Cross-language support

That's a SCons fork.  Not an HG branch (in case its a terminology problem).  
Make sure you are using the CrossLanguage bookmark.

V/R,
William

On Wed, Jul 29, 2015 at 5:45 PM, Jason Kenny <dragon...@live.com> wrote:

  branch SCons_20150323 

  I can will setup from scratch again and try again.

  Jason

  From: William Blevins 
  Sent: Wednesday, July 29, 2015 4:38 PM
  To: SCons developer list 
  Subject: Re: [Scons-dev] Cross-language support

  Jason,

  Are you sure you are using the correct commit revision?

  None of those tests are failing on my Linux distro, and I haven't modified 
any of those tests either.  Plus, tests that I am expecting to fail are 
apparently passing.

  V/R,
  William

  On Wed, Jul 29, 2015 at 5:06 PM, Jason Kenny <dragon...@live.com> wrote:

    So a quick pass of the tests has these failures

    Failed the following 15 tests:
            test\Batch\action-changed.py
            test\MSVS\vs-9.0-exec.py
            test\Win32\mingw.py
            test\exitfns.py
            test\implicit\IMPLICIT_COMMAND_DEPENDENCIES.py
            test\import.py
            test\long-lines\signature.py
            test\option\debug-count.py
            test\option\debug-multiple.py
            test\option\debug-objects.py
            test\scons-time\run\config\python.py
            test\scons-time\run\option\python.py
            test\sconsign\script\SConsignFile.py
            test\sconsign\script\Signatures.py
            test\sconsign\script\no-SConsignFile.py

    From: Jason Kenny 
    Sent: Wednesday, July 29, 2015 2:32 PM
    To: SCons developer list 
    Subject: Re: [Scons-dev] Cross-language support

    Ok let me update the branch and re-run everything.

    Jason

    From: William Blevins 
    Sent: Wednesday, July 29, 2015 10:30 AM
    To: SCons developer list 
    Subject: Re: [Scons-dev] Cross-language support

    Jason,

    I'm not sure.  I remember that you were helping me look into the recursive 
Install behavior.  Plus, possible parts incompatibility?

    I haven't ran the tests on a windows box at all.  I don't expect anything 
new, but it should be done before it ships :)

    V/R,
    William

    On Wed, Jul 29, 2015 at 8:44 AM, Jason Kenny <dragon...@live.com> wrote:

      Which MS toolchain on windows do we need tested? I can do a test run this 
afternoon.

      Jason

      From: William Blevins 
      Sent: Wednesday, July 29, 2015 1:11 AM
      To: SCons developer list 
      Subject: Re: [Scons-dev] Cross-language support

      Happy with it*


      Until the review is complete, and I can perhaps get a few more guinea 
pigs to try it out, it's hard to make a concrete projection. I have 3 items 
listed out that need to be given a thumbs up/down at a minimum:


      * Item #1 is still mostly outstanding.  I'm not sure how to address, 
please see the discussion Jason and I started a few weeks ago under the pull 
request comments.


      * Item #2 requires no changes (to my knowledge), but someone with more QT 
knowledge may say otherwise.

      * I may already have most of the patch for Item #3 (IE. no scanner for 
key) based on today's feedback.


      I also still need to request test runs on Windows, and for toolchains 
that I may not have installed or instructions to install them (EG. D).


      V/R,

      William


      On Wed, Jul 29, 2015 at 1:58 AM, William Blevins <wblevins...@gmail.com> 
wrote:

        As soon as we are happen with it :)


        On Wed, Jul 29, 2015 at 12:30 AM, Bill Deegan 
<b...@baddogconsulting.com> wrote:

          O.k. let me push 2.3.5 with the visual studio 2015 stuff.

          Then we'll changed to 2.4 merge slots. stabilize. release.

          Then this code? (2.5?)


          -Bill


          On Tue, Jul 28, 2015 at 6:33 PM, Jason Kenny <dragon...@live.com> 
wrote:

            I have been using the slots drop for a while with Parts. I think it 
is ready. It does have a notable improvement in speed and memory size. I would 
before getting this out as officially earlier than later.

            Jason

            From: William Blevins 
            Sent: Tuesday, July 28, 2015 8:31 PM
            To: Dirk Bächle ; SCons developer list 
            Subject: Re: [Scons-dev] Cross-language support



            On Tue, Jul 28, 2015 at 7:16 PM, Dirk Bächle <tshor...@gmx.de> 
wrote:

              Hi guys,

              sorry for chiming in so late.

              On 28.07.2015 23:44, Gary Oberbrunner wrote:

                Yes, that's how we've done it in the past.  Sounds like doing 
it at the same time as slots would be perfect.



              Doing this in parallel with the "slots" change sounds good to me 
too. +1


            I'm not opposed to releasing in the same update as slots, but since 
the cross language code reviews haven't been finished, I don't want to delay 
slots since it is ready now.


            The pessimist in me as sees doing two major enhancements in the 
same release as higher risk; I don't foresee any issues, but its worth the 
thought if the release overhead isn't too bad. 




                -- Gary

                On Tue, Jul 28, 2015 at 2:01 PM, Bill Deegan 
<b...@baddogconsulting.com <mailto:b...@baddogconsulting.com>> wrote:

                    Gary,

                    For such a change we should bump the second digit?
                    2.4?

                    I agree we should not turn down a change because it will 
cause rebuilds where the past didn't as long as it is now more correct
                    (which it should be with this change).


              Yes, "forward" is the way to go. ;)


                    Also agree we should be verbose in our notification of the 
impacts of the new change to avoid (as much as we can) "surprises".



              I think (better: hope) we did a good enough job for the "slots" 
stuff on this. For the scanner changes, I see them more like a fix...so a 
single announcement should be sufficient?

              Finally, and just in case I haven't done so already, I'd like to 
thank William for all the work he's done on this issue. I couldn't help as much 
as I would've liked, but with Gary's support you tackled this down and brought 
it to a good end. Kudos to you...bravo!



            Truly appreciated.  I have spent a lot of time on this issue 
despite what one might expect from the number of lines of code.

            It was honestly my first time working in a "real" python 
environment outside of scripting, and the SCons code base is rather complex.  
It instills me greater appreciation for the work that has already done.


            I also want to thank everyone here for their help past and future, 
but don't pat me on the back until its done. I might get lazy :)


             

              Best regards,

              Dirk 


              _______________________________________________
              Scons-dev mailing list
              Scons-dev@scons.org
              https://pairlist2.pair.net/mailman/listinfo/scons-dev



--------------------------------------------------------------------
            _______________________________________________
            Scons-dev mailing list
            Scons-dev@scons.org
            https://pairlist2.pair.net/mailman/listinfo/scons-dev


            _______________________________________________
            Scons-dev mailing list
            Scons-dev@scons.org
            https://pairlist2.pair.net/mailman/listinfo/scons-dev




          _______________________________________________
          Scons-dev mailing list
          Scons-dev@scons.org
          https://pairlist2.pair.net/mailman/listinfo/scons-dev






--------------------------------------------------------------------------
      _______________________________________________
      Scons-dev mailing list
      Scons-dev@scons.org
      https://pairlist2.pair.net/mailman/listinfo/scons-dev


      _______________________________________________
      Scons-dev mailing list
      Scons-dev@scons.org
      https://pairlist2.pair.net/mailman/listinfo/scons-dev





----------------------------------------------------------------------------
    _______________________________________________
    Scons-dev mailing list
    Scons-dev@scons.org
    https://pairlist2.pair.net/mailman/listinfo/scons-dev



----------------------------------------------------------------------------
    _______________________________________________
    Scons-dev mailing list
    Scons-dev@scons.org
    https://pairlist2.pair.net/mailman/listinfo/scons-dev


    _______________________________________________
    Scons-dev mailing list
    Scons-dev@scons.org
    https://pairlist2.pair.net/mailman/listinfo/scons-dev





------------------------------------------------------------------------------
  _______________________________________________
  Scons-dev mailing list
  Scons-dev@scons.org
  https://pairlist2.pair.net/mailman/listinfo/scons-dev


  _______________________________________________
  Scons-dev mailing list
  Scons-dev@scons.org
  https://pairlist2.pair.net/mailman/listinfo/scons-dev





--------------------------------------------------------------------------------
_______________________________________________
Scons-dev mailing list
Scons-dev@scons.org
https://pairlist2.pair.net/mailman/listinfo/scons-dev
_______________________________________________
Scons-dev mailing list
Scons-dev@scons.org
https://pairlist2.pair.net/mailman/listinfo/scons-dev

Reply via email to