On Fri, 31 Aug 2001, Mark Robinson wrote:
> Hello Iain,
>
Hey Mark (and Laurence ;)
>
> Have you set up the root device correctly for your new kernel image in
> lilo.conf???
Yup
image = /boot/vmlinuz-2.2.19
root = /dev/md1
initrd = /boot/initrd-2.2.19.img
read-only
label = new
Does the new kernel have all the various RAID levels
RAID 1 is in there - that is the one i am using
> available??? How did you build it?
make xconfig
make dep && make clean && make bzImage && make modules && make
modules_install
I found out about
> make cloneconfig
> a couple of weeks ago. Saves hours of endless fun!
OK - I've got a bit further. Thanks Laurence for the hint about
System.Map. That seems to have sorted out the module symbols. The initrd
file now works fine, but the RAID arrays are still not detected on boot. I
had a look at the old (2.2.14) kernel configs, and found
CONFIG_AUTODETECT_RAID
This does not seem to be an option in the 2.2.19 kernel (or the one I
downloaded anyway)
Does anyone know where this option is?
Monkey
>
> Mark
>
--------------------------------------------------------------------
http://www.lug.org.uk http://www.linuxportal.co.uk
http://www.linuxjob.co.uk http://www.linuxshop.co.uk
--------------------------------------------------------------------
